lugensc

Could be just the Net . Did you try the site VZ gave you. Cablenut program has some tweeaks also try this site

http://jlab4.jlab.org:7123/

Speeds seem off a tad what do you get with the supplied Router.

Lee

PS

  Sorry I'm rushing thru this but I'm sick as a dog and tring to get ready for Xmas

Yes . Its legit. Most Speedtest cannot handle the FIOS speed. They just break

Lee

Also they have awireless router at compusa for @$59.00 after rebates with the "Wireless N"I would pick that up if the sale did not end. That way you can handle anything up to 100 Mbps and then some. I'm sure Firmware upgrades would be in the pipeline too.

Lee

my bad.. This one

http://miranda.ctd.anl.gov:7123/

I get crappy results from the one you did also.

Check the results and copy them here

Lee

THat test is wrong please use the test site Verizon gave you or one from here. That will help you  get a better speed reading than Pitstop

Lee

I dont know about the LinkSys routers, I have a ViewSonic wireless router and when I hook it directly too the FiOS from the ONT I get a major speed decrease. So I keep the D-link they set up for me and use the viewsonic as a daisy chain. I have tested the wireless and get 10+mbit speeds thru the wireless G I have in the other room. And there is no slow down on my own system which is hardwired into the d-link. so I would suggest daisychaing the linksys or any other routers to the dlink as the dlink has the special firmware from verizon themselves.

Clifton

  Depending on the unit it may have a MAX of 10Mbps on the wan. Lucky for me the WRT54GS has a 100Mbps and you must set it up for PPPOE.

  You are absolutely correct that if the other router has a 10 Mbps max that the "Daisychain" remedy will work albeit the wireless may or maynot be a issue.

Lee

Correct OOL then FIOS via Verizon.

Take  Care

lee

Look at this ..Totally random.. My Scores are consistently over 14.6

My Wrt54GS with Hyperwrt Beta software works fine. Never even opened the DLink box

Lee

Let me know if I can help

Hi,

FIOS Up and running with Linksys PPPOE all is fine.

Granted it was running for only 10 min  or less before I had to work.

I'll keep you posted

lee

Hi,

    I have the WRT54GS ver 1.0 Hopefully I can just plug it in and go.

Lee

Try the LAN Port on the Linksys not the WAN.

I get the install this coming WED 7/13. I and trying to avoid a issue too. This tip was recommended to me. I can not at this point test it.

Lee