Jump to content


  • Posts

  • Joined

  • Last visited

  • Speed Test

    My Results

Everything posted by mbrainerd

  1. I could not find anything about upload. try this site it is close to you copy and paste the results here. My dsl package i have is 2568/898 my upload here is normally around 600 here and 840 everywhere else. i would try a few other sites andsee what you get. also try here and find one close to you http://www.speakeasy.net/speedtest/ http://ndt.itcc.unc.edu:7123/ This is what I am talking about it. here is a test i did hear :::.. Upload Stats ..::: Connection is:: 206 Kbps about 0.2 Mbps (tested with 97 KB) Upload Speed is:: 25 KB/s Tested From:: http://www.testmy.net/ Test Time:: Wed Feb 23 2005 19:02:37 GMT-0600 (Central Standard Time) Bottom Line:: 4X faster than 56K 1MB upload in 40.96 sec Diagnosis: May need help : running at only 32.8 % of your hosts average (gtec.net) Validation Link:: https://testmy.net/id-Q3Y7UOV64 this is a different site.WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 769.03Kb/s running 10s inbound test (server to client) . . . . . . 2.11Mb/s
  2. I tried the problem report and the site froze up. Will run the test again and try it again will post up as soon as i get a reply..
  3. hey cholla, no I have been their several times. if i raise my rwin anymore i get a lot of packet loss. my speeds are consistent on most test sites, but are not so staedy here at testmy. to many people testing here now.
  4. Thanks. My speeds our good on that site thought I might be able to squeeze a little more speed. I will email them and post with what they reply.. Thanks again..
  5. What does this mean in bold print? WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 851.87Kb/s running 10s inbound test (server to client) . . . . . . 2.11Mb/s ------ Client System Details ------ OS data: Name = Windows XP, Architecture = x86, Version = 5.1 Java data: Vendor = Sun Microsystems Inc., Version = 1.5.0_01 ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Full Duplex mode No network congestion discovered. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 116.10 msec; the Packet size = 1460 Bytes; and No packet loss was observed. This connection is receiver limited 91.93% of the time. Increasing the current receive buffer (0 KB) will improve performance enclosed is cablenut settings to. This connection is network limited 7.53% of the time. Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: OFF Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Information: Network Address Translation (NAT) box is modifying the Client's IP address Server says [] but Client says [] WEB100 Kernel Variables: Client: localhost/ AckPktsIn: 907 AckPktsOut: 0 BytesRetrans: 0 CongAvoid: 0 CongestionOverCount: 0 CongestionSignals: 0 CountRTT: 907 CurCwnd: 32120 CurMSS: 1460 CurRTO: 316 CurRwinRcvd: 0 CurRwinSent: 5840 CurSsthresh: 2147483647 DSACKDups: 0 DataBytesIn: 0 DataBytesOut: 2749124 DataPktsIn: 0 DataPktsOut: 1818 DupAcksIn: 0 ECNEnabled: 0 FastRetran: 0 MaxCwnd: 32120 MaxMSS: 1460 MaxRTO: 325 MaxRTT: 197 MaxRwinRcvd: 0 MaxRwinSent: 5840 MaxSsthresh: 0 MinMSS: 1460 MinRTO: 302 MinRTT: 99 MinRwinRcvd: 2147483647 MinRwinSent: 5840 NagleEnabled: 1 OtherReductions: 1 PktsIn: 907 PktsOut: 1818 PktsRetrans: 0 X_Rcvbuf: 87380 SACKEnabled: 3 SACKsRcvd: 3 SendStall: 0 SlowStart: 21 SampleRTT: 109 SmoothedRTT: 113 X_Sndbuf: 81840 SndLimTimeRwin: 9312185 SndLimTimeCwnd: 730464 SndLimTimeSender: 55851 SndLimTransRwin: 2 SndLimTransCwnd: 7 SndLimTransSender: 6 SndLimBytesRwin: 2651014 SndLimBytesCwnd: 75700 SndLimBytesSender: 22410 SubsequentTimeouts: 0 SumRTT: 103393 Timeouts: 0 TimestampsEnabled: 0 WinScaleRcvd: 2147483647 WinScaleSent: 2147483647 DupAcksOut: 0 StartTimeUsec: 867901 Duration: 10103278 c2sData: 2 c2sAck: 2 s2cData: 2 s2cAck: 3 Checking for mismatch condition (cwndtime > .3) [0.07>.3], (MaxSsthresh > 0) [0>0], (PktsRetrans/sec > 2) [0>2], (estimate > 2) [97.71>2] Checking for mismatch on uplink (speed > 50 [2.17>50], (xmitspeed < 5) [0.84<5] (rwintime > .9) [0.92>.9], (loss < .01) [1.0E<.01] Checking for excessive errors condition (loss/sec > .15) [1.0E>.15], (cwndtime > .6) [0.07>.6], (loss < .01) [1.0E<.01], (MaxSsthresh > 0) [0>0] Checking for 10 Mbps link (speed < 9.5) [2.17<9.5], (speed > 3.0) [2.17>3.0] (xmitspeed < 9.5) [0.84<9.5] (loss < .01) [1.0E<.01], (link > 0) [100>0] Checking for Wireless link (sendtime = 0) [0.00=0], (speed < 5) [2.17<5] (Estimate > 50 [97.71>50], (Rwintime > 90) [0.92>.90] (RwinTrans/CwndTrans = 1) [2/7=1], (link > 0) [100>0] Checking for DSL/Cable Modem link (speed < 2) [2.17<2], (SndLimTransSender = 0) [6=0] (SendTime = 0) [0.005530623359904937=0], (link > 0) [100>0] Checking for half-duplex condition (rwintime > .95) [0.92>.95], (RwinTrans/sec > 30) [0.20>30], (SenderTrans/sec > 30) [0.60>30], OR (link <= 10) [100<=10] Checking for congestion (cwndtime > .02) [0.07>.02], (mismatch = 0) [0=0] (MaxSsthresh > 0) [0>0] bw = 97.71 based on packet size = 11Kbits, RTT = 113.99msec, and loss = 1.0E-6 The theoretical network limit is 97.71 Mbps The transmit buffer (79.0 KByte) limits the application to 5.47 Mbps Your receive buffer (0 KByte) limits the application to 0 Mbps The network based flow control limits the application to 2.14 Mbps Client Data reports link is 'T1', Client Acks report link is 'T1' Server Data reports link is 'T1', Server Acks report link is 'Ethernet'
  6. I have been using lingo since december and it works great. Only problem I had was in the beginning lingo used port 69 for updating the router, and my isp blocked it.now lingo uses a different port for updating.. cannot beat it $19.95 per month unlimited us, canada,western europe. works great 4me living in a small town with only one phone company, and everyplace i called with them was long distance..
  7. Nice upload and download!! Wish I was able to reach those speeds...
  8. good price, but i will never see it here where i am at.. i pay $136 per month for 2568/898 service ithrough my local phone company..and they will never sell out to the big boys or run fiber where I am at..even though they have it 10 miles north from my home...
  9. you are getting what you are paying for. If you want to go faster you will have to upgrade your package from rogers.
  10. most likely they do not. you have a nice download now. What is your cap? upload and download. i would try a few other speed tests and see what kind ofresults you get you can try here http://ndt.itcc.unc.edu:7123/ also go here and see if they have one closer to you http://www.speakeasy.net/speedtest/
  11. First you can go here then post again. https://testmy.net/topic-2097 go to your command prompt type tracert testmy.net then copy and paste your results. after you do that Van will probably see what e can do.
  12. Once you get fixed with Dway. might want to try here if you have not already https://testmy.net/board-21 I suffered with Dway for about a month, then dsl came available through the phone company.. my dsl costs me $101 per month plus my phone line of $35. my speed package is 2568/898.. Good luck..
  13. probably used mom's credit card.......
  14. go to control panel, click network connections, right click your connection, then click properties. click configure. then advanced..connection type... that is where you set it...
  15. Crimes done over the internet are federal. What will matter is how much you charged, and how you obtained the numbers.. Might be able to rat s/one out and get off easy.
  16. If you are using a mac and you downloaded cablenut, you will need to open cable nut and delete tweaks.. not for mac.. you might want to check this link for mac tweaks... http://www.versiontracker.com/dyn/moreinfo/macosx/12591 welcome to the forum!!!
  17. guess I will never see red on a test...
  18. If it helps I have a friend of mine who has the Motorola V265 and he swears by it.. Of course he might be a little biased, Motorola is the only type of cell phone he has used for the last 6 years... I just ordered a Samsung, not the one you mention but I think it is a SGH427m s/thing like that few people I know have the Samsung's and they really like them... not one for taking pictures and surfing the net with a phone just like to be able to make and rec. phone calls. I guess what it boil;s down to is preference..
  19. hi harry welcome to the forum.. i had DirecWay before from what i read it is designed to work with IE and no other browser... you might want to check this link for DirecWay users https://testmy.net/board-21 there is a lot of info. here for direcway users
  20. I mean what does your isp say your upload speed is... i think sbc has 1.5/384 package.. is that the package you have??
  21. Hello Joey and welcome to the forum... if your download is 1.5 you are pretty close to that now. what is your upload cap? check this link and post again. https://testmy.net/topic-2097
  22. Thats what i did, then ran adware and spybot!!!!
  • Create New...