Jump to content

My download speeds have decreased and pages load slower...help...


Sharky2006

Recommended Posts

My download and connection speed has gone to a crawl....

:::.. Download Stats ..:::

Connection is:: 1463 Kbps about 1.5 Mbps (tested with 1496 kB)

Download Speed is:: 179 kB/s

Tested From:: https://testmy.net (server2)

Test Time:: Tue Jan 31 2006 18:53:13 GMT-0500 (Eastern Standard Time)

Bottom Line:: 26X faster than 56K 1MB download in 5.72 sec

Diagnosis: May need help : running at only 30.98 % of your hosts average (verizon.net)

Validation Link:: https://testmy.net/stats/id-16ZNOM3JE

My upload speed is higher than ever...

:::.. Upload Stats ..:::

Connection is:: 391 Kbps about 0.4 Mbps (tested with 579 kB)

Upload Speed is:: 48 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Tue Jan 31 2006 18:54:47 GMT-0500 (Eastern Standard Time)

Bottom Line:: 7X faster than 56K 1MB upload in 21.33 sec

Diagnosis: May need help : running at only 61.97 % of your hosts average (verizon.net)

Validation Link:: https://testmy.net/stats/id-GYIVH05C6

My pages load slower and the speedtest for Verizon DSL that used to range from 1700 KBits is ranging from 1200KBits to 1430KBits. (this is at http://infospeed.verizon.net/)

Can anyone help find out what is going on here?

Link to comment
Share on other sites

SpeedGuide.net TCP/IP Analyzer

TCP properties for IP = 70.111.1.91 ()

Browser/OS = Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8) Gecko/20051111 Firefox/1.5

Notes: Read the Analyzer FAQ if the above is not your IP address.

TCP options string = 020405ac0103030201010402

MTU = 1492

MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.

MSS = 1452

MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.

Default Receive Window (RWIN) = 256960

RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)

Unscaled Receive Window = 64240

For optimum performance, consider changing RWIN to a multiple of MSS.

Other values for RWIN that might work well with your current MTU/MSS:

511104 (MSS x 44 * scale factor of 8)

255552 (MSS x 44 * scale factor of 4)

127776 (MSS x 44 * scale factor of 2)

63888 (MSS x 44)

bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms

Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 55 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000 (0)

WEB100 Kernel Variables:

Client: localhost/127.0.0.1

AckPktsIn: 612

AckPktsOut: 0

BytesRetrans: 56628

CongAvoid: 370

CongestionOverCount: 0

CongestionSignals: 3

CountRTT: 469

CurCwnd: 37752

CurMSS: 1452

CurRTO: 430

CurRwinRcvd: 256960

CurRwinSent: 16304

CurSsthresh: 10164

DSACKDups: 0

DataBytesIn: 0

DataBytesOut: 1623336

DataPktsIn: 0

DataPktsOut: 1118

DupAcksIn: 132

ECNEnabled: 0

FastRetran: 3

MaxCwnd: 129228

MaxMSS: 1452

MaxRTO: 640

MaxRTT: 440

MaxRwinRcvd: 256960

MaxRwinSent: 16304

MaxSsthresh: 63888

MinMSS: 1452

MinRTO: 360

MinRTT: 110

MinRwinRcvd: 64240

MinRwinSent: 16304

NagleEnabled: 1

OtherReductions: 0

PktsIn: 612

PktsOut: 1118

PktsRetrans: 39

X_Rcvbuf: 103424

RcvWinScale: 7

SACKEnabled: 3

SACKsRcvd: 143

SendStall: 0

SlowStart: 97

SampleRTT: 210

SmoothedRTT: 200

X_Sndbuf: 103424

SndWinScale: 2

SndLimTimeRwin: 0

SndLimTimeCwnd: 10011767

SndLimTimeSender: 2598

SndLimTransRwin: 0

SndLimTransCwnd: 1

SndLimTransSender: 1

SndLimBytesRwin: 0

SndLimBytesCwnd: 1623336

SndLimBytesSender: 0

SubsequentTimeouts: 0

SumRTT: 79780

Timeouts: 0

TimestampsEnabled: 0

WinScaleRcvd: 2

WinScaleSent: 7

DupAcksOut: 0

StartTimeUsec: 345479

Duration: 10017223

c2sData: 2

c2sAck: 2

s2cData: 9

s2cAck: 3

half_duplex: 0

link: 100

congestion: 1

bad_cable: 0

mismatch: 0

spd: 0.00

bw: 1.26

loss: 0.002683363

avgrtt: 170.11

waitsec: 0.00

timesec: 10.00

order: 0.2157

rwintime: 0.0000

sendtime: 0.0003

cwndtime: 0.9997

rwin: 1.9604

swin: 64.0000

cwin: 0.9859

rttsec: 0.170107

Sndbuf: 8388608

aspd: 3.65148

Checking for mismatch on uplink

(speed > 50 [0>50], (xmitspeed < 5) [0.42<5]

(rwintime > .9) [0>.9], (loss < .01) [0.00<.01]

Checking for excessive errors condition

(loss/sec > .15) [2.68>.15], (cwndtime > .6) [0.99>.6],

(loss < .01) [0.00<.01], (MaxSsthresh > 0) [63888>0]

Checking for 10 Mbps link

(speed < 9.5) [0<9.5], (speed > 3.0) [0>3.0]

(xmitspeed < 9.5) [0.42<9.5] (loss < .01) [0.00<.01], (mylink > 0) [3.0>0]

Checking for Wireless link

(sendtime = 0) [3.0E=0], (speed < 5) [0<5]

(Estimate > 50 [1.26>50], (Rwintime > 90) [0>.90]

(RwinTrans/CwndTrans = 1) [0/1=1], (mylink > 0) [3.0>0]

Checking for DSL/Cable Modem link

(speed < 2) [0<2], (SndLimTransSender = 0) [1=0]

(SendTime = 0) [3.0E-4=0], (mylink > 0) [3.0>0]

Checking for half-duplex condition

(rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30],

(SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10]

Checking for congestion

(cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0]

(MaxSsthresh > 0) [63888>0]

estimate = 1.26 based on packet size = 11Kbits, RTT = 170.11msec, and loss = 0.002683363

The theoretical network limit is 1.26 Mbps

The NDT server has a 8192.0 KByte buffer which limits the throughput to 376.23 Mbps

Your PC/Workstation has a 250.0 KByte buffer which limits the throughput to 11.52 Mbps

The network based flow control limits the throughput to 5.79 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet'

Link to comment
Share on other sites

I forgot...this also...

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 423.31Kb/s

running 10s inbound test (server to client) . . . . . . 1.25Mb/s

------  Client System Details  ------

OS data: Name = Windows XP, Architecture = x86, Version = 5.1

Java data: Vendor = Sun Microsystems Inc., Version = 1.5.0_01

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 170.11 msec; the Packet size = 1452 Bytes; and

There were 39 packets retransmitted, 132 duplicate acks received, and 143 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.97% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Information: Network Middlebox is modifying MSS variable

Server IP addresses are preserved End-to-End

Information: Network Address Translation (NAT) box is modifying the Client's IP address

Server says [70.111.1.91] but Client says [192.168.1.47]

Link to comment
Share on other sites

My advertised speeds are 1.5/768.

I was getting 1.7 KBits/368

When I wrote this post i got

After you ccs:

Verizon DSL speedtest results:

1148.1KBits 143.5KBytes

TestMyNet results:

:::.. Download Stats ..:::

Connection is:: 1497 Kbps about 1.5 Mbps (tested with 1496 kB)

Download Speed is:: 183 kB/s

Tested From:: https://testmy.net (server2)

Test Time:: Tue Jan 31 2006 21:24:50 GMT-0500 (Eastern Standard Time)

Bottom Line:: 27X faster than 56K 1MB download in 5.6 sec

Diagnosis: May need help : running at only 31.69 % of your hosts average (verizon.net)

Validation Link:: https://testmy.net/stats/id-FOBJ9175A

:::.. Upload Stats ..:::

Connection is:: 391 Kbps about 0.4 Mbps (tested with 579 kB)

Upload Speed is:: 48 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Tue Jan 31 2006 21:26:12 GMT-0500 (Eastern Standard Time)

Bottom Line:: 7X faster than 56K 1MB upload in 21.33 sec

Diagnosis: May need help : running at only 61.97 % of your hosts average (verizon.net)

Validation Link:: https://testmy.net/stats/id-HOBC3ZQ2W

Link to comment
Share on other sites

At http://infospeed.verizon.net/)

823.2KBits 102.9KBytes

At https://testmy.net

:::.. Download Stats ..:::

Connection is:: 1500 Kbps about 1.5 Mbps (tested with 1496 kB)

Download Speed is:: 183 kB/s

Tested From:: https://testmy.net (server2)

Test Time:: Tue Jan 31 2006 22:28:37 GMT-0500 (Eastern Standard Time)

Bottom Line:: 27X faster than 56K 1MB download in 5.6 sec

Diagnosis: May need help : running at only 31.76 % of your hosts average (verizon.net)

Validation Link:: https://testmy.net/stats/id-8L1USTWZR

Largest File Test....

:::.. Download Stats ..:::

Connection is:: 1495 Kbps about 1.5 Mbps (tested with 2992 kB)

Download Speed is:: 183 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Tue Jan 31 2006 22:29:20 GMT-0500 (Eastern Standard Time)

Bottom Line:: 27X faster than 56K 1MB download in 5.6 sec

Diagnosis: May need help : running at only 31.65 % of your hosts average (verizon.net)

Validation Link:: https://testmy.net/stats/id-QCNE1B06G

FYI...I contacted Verizon and they are sending me a new modem.  According to their tests, the lines are fine so they deduced that the problem is from my modem to my computer.

Link to comment
Share on other sites

By the way, after installing Firetune, my speed has increased to 1520Kbps

:::.. Download Stats ..:::

Connection is:: 1520 Kbps about 1.5 Mbps (tested with 2992 kB)

Download Speed is:: 186 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Wed Feb 01 2006 17:53:21 GMT-0500 (Eastern Standard Time)

Bottom Line:: 27X faster than 56K 1MB download in 5.51 sec

Diagnosis: May need help : running at only 32.2 % of your hosts average (verizon.net)

Validation Link:: https://testmy.net/stats/id-WDPTR73S5

but still slow for infospeed

1454.5KBits 181.8KBytes

ANYTHING else I could do.  I really don't use my computer for anything other than the internet so is their a way that I could configure my computer to use its resources primarily for internet use?

Link to comment
Share on other sites

My advertised speeds are 1.5/368 but my connection overview found in http://192.168.1.1/index.htm which is WireSpeed Data Gateway is 1792 KBits/Sec by 448 KBits/Sec.  The reason I am complaining is because I used to get faster speeds.

verizon over caps there speed for the modem because of overhead,  the speeds expected are 1.5/384 after overhead. i would not complain ur getting ur advertised speeds.  BE HAPPY

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...