Jump to content

Help me out guys!


adiace

Recommended Posts

Hello first I'd like to say that I'm glad to be part of this forum and absolutely love this site. The reason I'm posting is because I've been having horrible download speeds lately, I even upgraded my package from 3/384 to 6/800 but no change in speeds, still really bad. Here are my test results (highest download speed i've gotten today):

:::.. Download Stats ..:::

Connection is:: 939 Kbps about 0.9 Mbps (tested with 1496 kB)

Download Speed is:: 115 kB/s

Tested From:: https://testmy.net (server2)

Test Time:: Thu Feb 2 23:47:54 PST 2006

Bottom Line:: 17X faster than 56K 1MB download in 8.9 sec

Diagnosis: May need help : running at only 31.92 % of your hosts average (rogers.com)

Validation Link:: https://testmy.net/stats/id-JYHP57O6W

------------------------------------------------------------------------------------------

TCP options string = 020405b401010402

MTU = 1500

MTU is fully optimized for broadband.

MSS = 1460

Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 17520

RWIN Scaling (RFC1323) = 0 bits

Unscaled Receive Window = 17520

RWIN is a multiple of MSS

Other values for RWIN that might work well with your current MTU/MSS:

513920 (MSS x 44 * scale factor of 8)

256960 (MSS x 44 * scale factor of 4)

128480 (MSS x 44 * scale factor of 2)

64240 (MSS x 44) 

bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms

Your RcvWindow limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms

Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 120 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000 (0)

----------------------------------------------------------------------------------------------

TCP/Web100 Network Diagnostic Tool v5.3.3d

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 724.19Kb/s

running 10s inbound test (server to client) . . . . . . 308.00kb/s

Your PC is connected to a Cable/DSL modem

Information: Other network traffic is congesting the link

Information: The receive buffer should be 56.46 Kbytes to maximize throughput

Any help would be greatly appreciated, thanks!

Link to comment
Share on other sites

This is using the ccs file you suggested:

TCP/Web100 Network Diagnostic Tool v5.3.3d

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 830.31kB/s

running 10s inbound test (server to client) . . . . . . 1.18Mb/s

Your PC is connected to a Cable/DSL modem

----------------------------------------------------------------------

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 830.31kB/s

running 10s inbound test (server to client) . . . . . . 1.18Mb/s

------  Client System Details  ------

OS data: Name = Windows 2000, Architecture = x86, Version = 5.0

Java data: Vendor = Sun Microsystems Inc., Version = 1.5.0_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

No network congestion discovered.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 160.54 msec; the Packet size = 1460 Bytes; and

There were 6 packets retransmitted, 208 duplicate acks received, and 106 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is receiver limited 9.96% of the time.

This connection is network limited 90.0% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: OFF

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Information: Network Address Translation (NAT) box is modifying the Client's IP address

Server says [24.42.42.218] but Client says [192.168.1.100]

--------------------------------------------------------------

The theoretical network limit is 1.12 Mbps

The NDT server has a 101.0 KByte buffer which limits the throughput to 4.91 Mbps

Your PC/Workstation has a 62.0 KByte buffer which limits the throughput to 3.05 Mbps

The network based flow control limits the throughput to 3.12 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet'

Link to comment
Share on other sites

New results:

TCP/Web100 Network Diagnostic Tool v5.3.3d

click START to begin

Another client is currently being served, your test will begin within 45 seconds

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 828.57Kb/s

running 10s inbound test (server to client) . . . . . . 720.86kb/s

Your PC is connected to a Cable/DSL modem

Information: Other network traffic is congesting the link

---------------------------------------------

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 831.79Kb/s

running 10s inbound test (server to client) . . . . . . 771.01kb/s

------  Client System Details  ------

OS data: Name = Windows 2000, Architecture = x86, Version = 5.0

Java data: Vendor = Sun Microsystems Inc., Version = 1.5.0_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 148.61 msec; the Packet size = 1460 Bytes; and

There were 2 packets retransmitted, 88 duplicate acks received, and 24 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.97% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: OFF

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Information: Network Address Translation (NAT) box is modifying the Client's IP address

Server says [24.42.42.218] but Client says [192.168.1.100]

--------------------------------------------------

The theoretical network limit is 1.35 Mbps

The NDT server has a 101.0 KByte buffer which limits the throughput to 5.30 Mbps

Your PC/Workstation has a 62.0 KByte buffer which limits the throughput to 3.29 Mbps

The network based flow control limits the throughput to 1.19 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'T1'

Link to comment
Share on other sites

TCP options string = 020405b40103030001010402

MTU = 1500

MTU is fully optimized for broadband.

MSS = 1460

Maximum useful data in each packet = 1460, which equals MSS.

Default TCP Receive Window (RWIN) = 64240

RWIN Scaling (RFC1323) = 0 bits

Unscaled TCP Receive Window = 64240

RWIN is a multiple of MSS

Other values for RWIN that might work well with your current MTU/MSS:

513920 (MSS x 44 * scale factor of 8)

256960 (MSS x 44 * scale factor of 4)

128480 (MSS x 44 * scale factor of 2) 

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms

Your TCP Window limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 56 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000 (0)

Link to comment
Share on other sites

Results with the 1500-128..file:

TCP options string = 020405b40103030001010402

MTU = 1500

MTU is fully optimized for broadband.

MSS = 1460

Maximum useful data in each packet = 1460, which equals MSS.

Default TCP Receive Window (RWIN) = 64240

RWIN Scaling (RFC1323) = 0 bits

Unscaled TCP Receive Window = 64240

RWIN is a multiple of MSS

Other values for RWIN that might work well with your current MTU/MSS:

513920 (MSS x 44 * scale factor of 8)

256960 (MSS x 44 * scale factor of 4)

128480 (MSS x 44 * scale factor of 2) 

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms

Your TCP Window limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 56 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000 (0)

--------------------------

TCP/Web100 Network Diagnostic Tool v5.3.3d

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 818.79Kb/s

running 10s inbound test (server to client) . . . . . . 508.17kb/s

Your PC is connected to a Cable/DSL modem

Information: Other network traffic is congesting the link

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 818.79Kb/s

running 10s inbound test (server to client) . . . . . . 508.17kb/s

------  Client System Details  ------

OS data: Name = Windows 2000, Architecture = x86, Version = 5.0

Java data: Vendor = Sun Microsystems Inc., Version = 1.5.0_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 155.62 msec; the Packet size = 1460 Bytes; and

There were 8 packets retransmitted, 81 duplicate acks received, and 48 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.97% of the time.

Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: OFF

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Information: Network Address Translation (NAT) box is modifying the Client's IP address

Server says [24.42.x.x] but Client says [192.168.1.100]

The theoretical network limit is 0.61 Mbps

The NDT server has a 101.0 KByte buffer which limits the throughput to 5.07 Mbps

Your PC/Workstation has a 62.0 KByte buffer which limits the throughput to 3.14 Mbps

The network based flow control limits the throughput to 0.71 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'T1'

-----------------------------------

The current date is: Fri 02/03/2006

The current time is:  0:54:50.39

Microsoft Windows 2000 [Version 5.00.2195]

Pinging testmy.net [67.18.179.85] with 32 bytes of data:

Reply from 67.18.179.85: bytes=32 time=60ms TTL=43

Reply from 67.18.179.85: bytes=32 time=70ms TTL=43

Reply from 67.18.179.85: bytes=32 time=81ms TTL=43

Reply from 67.18.179.85: bytes=32 time=70ms TTL=43

Reply from 67.18.179.85: bytes=32 time=70ms TTL=43

Reply from 67.18.179.85: bytes=32 time=70ms TTL=43

Reply from 67.18.179.85: bytes=32 time=90ms TTL=43

Reply from 67.18.179.85: bytes=32 time=120ms TTL=43

Reply from 67.18.179.85: bytes=32 time=110ms TTL=43

Reply from 67.18.179.85: bytes=32 time=60ms TTL=43

Reply from 67.18.179.85: bytes=32 time=60ms TTL=43

Reply from 67.18.179.85: bytes=32 time=61ms TTL=43

Ping statistics for 67.18.179.85:

    Packets: Sent = 12, Received = 12, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

    Minimum = 60ms, Maximum =  120ms, Average =  76ms

Ping Complete.

Tracing route to testmy.net [67.18.179.85]

over a maximum of 30 hops:

  1   <10 ms   <10 ms   <10 ms  85.67-18-179.reverse.theplanet.com [67.18.179.85]

  2    30 ms    30 ms    20 ms  10.91.156.1

  3    20 ms    10 ms    10 ms  gw03.ym.phub.net.cable.rogers.com [66.185.90.17]

  4    20 ms    20 ms    60 ms  gw01.ym.phub.net.cable.rogers.com [66.185.93.9]

  5    20 ms    20 ms    30 ms  gw02.ym.phub.net.cable.rogers.com [66.185.80.214]

  6    30 ms    20 ms    50 ms  gw02.wlfdle.phub.net.cable.rogers.com [66.185.80.49]

  7    30 ms    50 ms    40 ms  igw01.vaash.phub.net.cable.rogers.com [66.185.80.190]

  8    40 ms    40 ms    30 ms  216.200.56.1.has.no.reverse [216.200.56.1]

  9    30 ms    60 ms    41 ms  so-4-0-0.mpr1.iad2.us.above.net [64.125.30.118]

10    60 ms    40 ms    40 ms  so-4-0-0.mpr2.iad1.us.above.net [64.125.29.133]

11    20 ms    40 ms    30 ms  so-1-0-0.cr2.dca2.us.above.net [64.125.28.129]

12    60 ms    81 ms    60 ms  so-6-0-0.cr2.dfw2.us.above.net [64.125.28.70]

13    70 ms    60 ms    50 ms  216.200.6.237.theplanet.com [216.200.6.237]

14    60 ms   270 ms   211 ms  vl31.dsr02.dllstx3.theplanet.com [70.85.127.30]

15    80 ms    60 ms    90 ms  vl42.dsr02.dllstx4.theplanet.com [70.85.127.91]

16    50 ms    70 ms    80 ms  gi1-0-1.car17.dllstx4.theplanet.com [67.18.116.69]

17    70 ms    80 ms    70 ms  85.67-18-179.reverse.theplanet.com [67.18.179.85]

Trace complete.

<edit> hid IP<br>-FE

Link to comment
Share on other sites

You still got

"Default TCP Receive Window (RWIN) = 64240

RWIN Scaling (RFC1323) = 0 bits

Unscaled TCP Receive Window = 64240"

If my ccs file made changes to your registry you should get this:

Default TCP Receive Window (RWIN) = 128480

RWIN Scaling (RFC1323) = 0 bits

Unscaled TCP Receive Window = 64240

Are you running some security software protecting against registry changes?

Link to comment
Share on other sites

Nothing that I know is running that would protect against registry changes. When I first posted I got these results:

Default Receive Window (RWIN) = 17520

RWIN Scaling (RFC1323) = 0 bits

Unscaled Receive Window = 17520

and now they are (with using the ccs files)

Default TCP Receive Window (RWIN) = 64240

RWIN Scaling (RFC1323) = 0 bits

Unscaled TCP Receive Window = 64240

is there any way I can check if the values really are in the registry?

Link to comment
Share on other sites

Click to open the Cablenut Adjuster and it will display the existing settings in your registry.

In the first item on top left, it should read

DefaultReceiveWindow - 128480

If not, change the value to 128480, save to registry exit the Cablenut Adjuster and then reopen Cablenut Adjuster to check if values have bben changed.

If yes, reboot comp.

Link to comment
Share on other sites

Ok well the DefaultReceiveWindow was 128480, but just to see if it makes any difference to the registry once I reboot I changed TcpWindowSize, GlobalMaxTcpWindowSize and DefaultSendWindow to 128480 and this is the result I got now:

TCP options string = 020405b40103030101010402

MTU = 1500

MTU is fully optimized for broadband.

MSS = 1460

Maximum useful data in each packet = 1460, which equals MSS.

Default TCP Receive Window (RWIN) = 128480

RWIN Scaling (RFC1323) = 1 bits (scale factor of 2)

Unscaled TCP Receive Window = 64240

RWIN is a multiple of MSS

Other values for RWIN that might work well with your current MTU/MSS:

513920 (MSS x 44 * scale factor of 8)

256960 (MSS x 44 * scale factor of 4)

64240 (MSS x 44) 

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 5139.2 Kbps (642.4 KBytes/s) @ 200ms

Your TCP Window limits you to: 2055.68 Kbps (256.96 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 56 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000 (0)

Link to comment
Share on other sites

:::.. Download Stats ..:::

Connection is:: 1790 Kbps about 1.8 Mbps (tested with 2992 kB)

Download Speed is:: 219 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Fri Feb 3 01:30:49 PST 2006

Bottom Line:: 32X faster than 56K 1MB download in 4.68 sec

Diagnosis: May need help : running at only 60.88 % of your hosts average (rogers.com)

Validation Link:: https://testmy.net/stats/id-PZ7KE8H24

:::.. Upload Stats ..:::

Connection is:: 757 Kbps about 0.8 Mbps (tested with 2992 kB)

Upload Speed is:: 92 kB/s

Tested From:: https://testmy.net (server2)

Test Time:: Fri Feb 3 01:31:58 PST 2006

Bottom Line:: 14X faster than 56K 1MB upload in 11.13 sec

Diagnosis: Awesome! 20% + : 116.29 % faster than the average for host (rogers.com)

Validation Link:: https://testmy.net/stats/id-3KQPFW8MN

---------------------------------------------------

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 829.48Kb/s

running 10s inbound test (server to client) . . . . . . 1.30Mb/s

------  Client System Details  ------

OS data: Name = Windows 2000, Architecture = x86, Version = 5.0

Java data: Vendor = Sun Microsystems Inc., Version = 1.5.0_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 133.07 msec; the Packet size = 1460 Bytes; and

There were 5 packets retransmitted, 197 duplicate acks received, and 89 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.97% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: OFF

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Information: Network Address Translation (NAT) box is modifying the Client's IP address

Server says [24.42.x.x] but Client says [192.168.1.100]

The theoretical network limit is 1.61 Mbps

The NDT server has a 101.0 KByte buffer which limits the throughput to 5.92 Mbps

Your PC/Workstation has a 62.0 KByte buffer which limits the throughput to 3.68 Mbps

The network based flow control limits the throughput to 2.92 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet'

<edit>hid IP<br>-FE

Link to comment
Share on other sites

Result from the Analyzer test:

TCP options string = 020405b40103030001010402

MTU = 1500

MTU is fully optimized for broadband.

MSS = 1460

Maximum useful data in each packet = 1460, which equals MSS.

Default TCP Receive Window (RWIN) = 64240

RWIN Scaling (RFC1323) = 0 bits

Unscaled TCP Receive Window = 64240

RWIN is a multiple of MSS

Other values for RWIN that might work well with your current MTU/MSS:

513920 (MSS x 44 * scale factor of 8)

256960 (MSS x 44 * scale factor of 4)

128480 (MSS x 44 * scale factor of 2) 

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms

Your TCP Window limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 56 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000 (0)

Link to comment
Share on other sites

Still the same setting of RWIN 64240 and that is why  "62.0 KByte buffer which limits the throughput to 3.68 Mbps"

With RWIN at 128480, Window Scaling should be turned on

In Cablenut Adjuster, the 4th item from top right

Tcp13230pts - 1

If Cablenut cannot make adjustments that will retains in your registry, please go to this site and download the TCP Optimizer v203 and I will help you make adjustments with it:

www.speedguide.net

RFC 1323 Window Scaling: OFF

Your PC/Workstation has a 62.0 KByte buffer which limits the throughput to 3.68 Mbps

The network based flow control limits the throughput to 2.92 Mbps

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...