Jump to content

query reg my broadband speed


karthic

Recommended Posts

thank u fallow earth for ur reply

                     yes i get fluctuations in my speed but to wild limit i.e., instead of 256kpbs(rated) iat times get only 95kpbs  Moreover the transfer rate doesn t remain constant at all During heavy downloads it affects me very much drooping to just 12KPBS in dialup itself i had abt 4-5KPBS then wat s the point in having the broadband connection dude?

                       Pls help me to finetune my speed so that i ve a somewhat CONSTANT SPEED &TRANSFER RATE during most of the times of the day!!!!!!!!!!!!!

                       u see i just want to set it right ok dude !

                       as u told i carried out ht eone told by u & i ve no knowledge of identifying  which all processes r hogging my speed so i m posting it for ur perusual  hav a look at it & post ur comments pls

           TCPSVCS.exe

            SVCHOST.exe

             System

            SVCHOST.exe

              System

              IEXPLORE.exe

            SVCHOST.exe

               ALG.exe

              SVCHOST.exe

                 SVCHOST.exe

                CCAPP.exe

                 IEXPLORE.exe

                 TCPSVCS.exe

                     here are some processeswhich i think may help u many PID s in the cmd window dont show up in the task manager window & some some procces r repeated many times eg., SVCHOST.exe

                   pls post  comments

Link to comment
Share on other sites

hey dude

        i do know basics of duplex man  but my q is relation betwn the alarm info & ur advice i.e., "See if you still get this alarm if you raise your modem one foot above your comp?"

        Can this prob be rectified by placing the modem as u said? or, r there any other alternatives??????????

Link to comment
Share on other sites

Before you relocate your modem, the duplex setting between your Nic and modem matches. After relocation, nitro test raised the alarm of a mismatch. My guess is that the switches in your modem are being affected by electromagnetic interference.

This may also explain the wild swing in speeds.

Since your comp table is cluttered with many items, you may want to place your modem on the floor directly below your computer tower. Cables from the wall runs along the floor to your modem and then a cable from your modem up to your comp tower.

Later, you may be able to find a low support for your modem so that humidity will not affect it.

Link to comment
Share on other sites

hai trojers

      Now i had my modem on the floor right under my comp table & i tested the speed

    Sorry dude the same results as

:::.. Download Stats ..:::

Connection is:: 288 Kbps about 0.3 Mbps (tested with 579 kB)

Download Speed is:: 35 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Sat Feb 18 23:11:02 UTC+0530 2006

Bottom Line:: 5X faster than 56K 1MB download in 29.26 sec

Diagnosis: Looks Great : 8.27 % faster than the average for host (42.82)

Validation Link:: https://testmy.net/stats/id-0NXQKGHIA

with nitro

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 82.49Kb/s

running 10s inbound test (server to client) . . . . . . 302.42kb/s

Your PC is connected to a Cable/DSL modem

Alarm: Duplex mismatch condition exists: Host set to Full and Switch set to Half duplex

Information: The receive buffer should be 116.20 Kbytes to maximize throughput

Your PC/Workstation has a 30.0 KByte buffer which limits the throughput to 0.76 Mbps

The network based flow control limits the throughput to 0.78 Mbps

          Any comments please

Link to comment
Share on other sites

See if this adjustment to your Nic will work.

Windows 2000 or XP: to change to auto-sensing:

    * Open Control Panel.

    * Double-click Network and Dial-up Connections.

    * Identify the icon for your cable modem connection: usually Local Area Connection.

    * Right-click that icon and select Properties.

    * Under the ethernet adapter icon, click the button Configure.

          o Click the tab Advanced to bring it to the front:

                + In the Property box, the property name to be selected varies according to model of ethernet card. Examples are: Network Link Selection, Media Type, Connection Type, Duplex Mode, or any similarly-named property which can have Values looking like Auto-Negotiation, or 10BT, or 10BaseT.

                + In the Value box, select a value for auto sensing or something similar.

          o Click OK to exit the Adapter settings.

    * Click OK to exit the Connection properties.

Link to comment
Share on other sites

hai  trojers

        how r u ? 

        sorry for not replying u yesterday night man!

        today morning i tested like u said i changed that setting to 10Mpbs/halfduplex then 10Mpbs/full duplex but nothing changed really  the same result awaited me with the nitro site but the speeds r nearly above rated i.e., they were 315kpbs(1st time) 285kpbs(2nd time) with testmy.net Even i made my mind to replace my modem with ISP as u said

        now (10:06pm)i checked it again man i m really taken aback with the result which r as follows

:::.. Download Stats ..:::

Connection is:: 58 Kbps about 0.1 Mbps (tested with 579 kB)

Download Speed is:: 7 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Sun Feb 19 21:55:08 UTC+0530 2006

Bottom Line:: 1X faster than 56K 1MB download in 146.29 sec

Diagnosis: May need help : running at only 19.46 % of your hosts average (51.64)

Validation Link:: https://testmy.net/stats/id-NTPE3FXLG

  with nitro site

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 55.92Kb/s

running 10s inbound test (server to client) . . . . . . 58.25kb/s

Your PC is connected to a Cable/DSL modem

Information: Other network traffic is congesting the link

Information: The receive buffer should be 152.27 Kbytes to maximize throughput

Your PC/Workstation has a 30.0 KByte buffer which limits the throughput to 0.58 Mbps

The network based flow control limits the throughput to 0.15 Mbps

            what is really happening ? i culdnt understand both during my tests (in the morning & now) the modem wasn t relocated i.e., it was right under my comp table

                    wat culd have happened? ur comments pls?

                            thank u

Link to comment
Share on other sites

trogers

        whats relly happening / i switched off my modem & again switched onand tested the results ha  hahahahahaha

:::.. Download Stats ..:::

Connection is:: 246 Kbps about 0.2 Mbps (tested with 579 kB)

Download Speed is:: 30 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Sun Feb 19 22:24:19 UTC+0530 2006

Bottom Line:: 4X faster than 56K 1MB download in 34.13 sec

Diagnosis: May need help : running at only 15.56 % of your hosts average (39.45)

Validation Link:: https://testmy.net/stats/id-KPWOG7RU2

with nitro site

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 83.62Kb/s

running 10s inbound test (server to client) . . . . . . 326.40kb/s

Your PC is connected to a Cable/DSL modem

Alarm: Duplex mismatch condition exists: Host set to Full and Switch set to Half duplex

Information: The receive buffer should be 120.79 Kbytes to maximize throughpu

Your PC/Workstation has a 30.0 KByte buffer which limits the throughput to 0.73 Mbps

The network based flow control limits the throughput to 0.75 Mbps

                                do i have to replace modem with a new one??????????

Link to comment
Share on other sites

hi trojers

        i ll check telephone line already it will go into problems when it s heavily raining so i used a PVC tape to wrap around hte broken line may thats the prob i hope

        i ll look into it &revert back to u once when its checked

                      thank u !!!!!!!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...