Jump to content

I'm a new customer


Recommended Posts

Hey everybody,  I just got my direcway installed today.  So far so good except for secure sites.  I have tried everything that ya'll have said do.  Not working.  If anyone can get into secure sites using IE, please let me know how you did it.  I can't even update Windows from Microsoft.com:::.. Download Stats ..:::

Connection is:: 907 Kbps about 0.9 Mbps (tested with 1496 KB)

Download Speed is:: 111 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 16 times faster than 56K you can download 1MB in 9.23 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=A4BH1XT26

.  Here are my speeds.

Link to comment
Share on other sites

Here is my new test.

:::.. Download Stats ..:::

Connection is:: 694 Kbps about 0.7 Mbps (tested with 2992 KB)

Download Speed is:: 85 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 12 times faster than 56K you can download 1MB in 12.05 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=W7U145YHC

Thanks for any help, by the way i'm on horizon 1.

Link to comment
Share on other sites

Oh!  Hey, give it a day or two because they are screwing around with that bird and so there is nothing we can do on this end that would be of any good.  Sorry for the wait, but I have no control over their idiots at the Level III who should be in the room to begin with.  Right now, you are amoung about 12,000 customers running the same speed.  The other half are getting awesome speeds over 1.3Mpbs (average).  I'll let you know when things change, or pls let me know asap when you observe a change for the better.

Since you have applied all tweaks, did you also download and install TCP Optimizer PLUS Dr. TCP only to turn Time Stamping on?  I've included them (attached) to save you at bit of searching.

Here are the most successful settings for Dr. TCP:

TCP Receive Window  0

Window Scaling  No

Time Stamping  Yes!  (helps with latency)

Selective Acks  Yes

Dial Up (RAS) MTU (el blanko)

Path MTU Discovery  YES

Black Hole Detection  NO

Max Duplicate ACKs  2!!!!

TTL  64

Adapter Settings should be for whatever device is listed in that box that is listed.  If you have a LAN and Router, use your NIC.  IF not, use whatever it detected, set the MTU to 1500 and SAVE wherever your like the exit.  Leave that in your machine no matter what.


For TCP Optimiser (from Speed Guide)  <---has more toys!

First, click on FILE, then select "Backup Current Settings" just in case you get dusted....

On the mid-line of choices, set it to Extreme

In the Netowkr Adapter Selection, most likely your NIC will be displayed and that's what ya want

Everything should be pretty much ghosted when set to Extreme

Set the lower choice to Optimal Settings

Under the MTU, you can let it check for you by clicking on the start, but ALL of DWay uses an MTU of 1500 for DW6000s especially (some 4000s are better off with 1460 or 1480.

On the Latency/Ping tab, "modify" it so that your favorite haunts are listed - - plus www.google.com and www.cnn.com  this will give you an excellent number to reference for your config!!!!

Double check to make sure it is still set to Optimal Settings, Apply Changes, then reboot that puppy, get on bended knee and pray for the best when you test again.  You SHOULD see an increase, but if not, it will get better over the next very few days.  If not?  Dig me up and we'll take that sucker apart. C4 ....everything.  :)


The Reverend

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...