elijahpaul Posted March 17, 2007 CID Share Posted March 17, 2007 and cFosSpeed.. go here: cfosspeed.de Quote Link to comment Share on other sites More sharing options...
archramosxxx Posted March 17, 2007 CID Share Posted March 17, 2007 Hi everyone! Here's my SmartBro stats... tweaked the canopy a bit and I got this... Download Speed Test Results "Not the fastest broadband, but it's broadband... Your connection scored 1.5/5 stars." (test again) 519 Kbps or 0.5 Mbps (63 kB/s) Your connection is: 519 Kbps or 0.5 Mbps You downloaded at: 63 kB/s You are running: 9 times faster than 56K and can download 1 megabyte in 16.25 second(s) Member Ident:Username:archramosxxx CompID:115182795373 Test Time:: 2007/03/17 - 1:17am Test Browser and OS info: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30) Test ID: 29Y3B5NFO (if this is a screenshot go to testmy.net to see if this is fake) Diagnosis ^info^: Awesome! 20% + : 42.98 % faster than the average for host (241.15) This was tested from a 579 kB file and took 9.14 seconds to complete Quote Link to comment Share on other sites More sharing options...
needforspeed Posted March 17, 2007 CID Share Posted March 17, 2007 hey archramosxxx, can u pls post the config of ur cannopy?? thanks... Quote Link to comment Share on other sites More sharing options...
archramosxxx Posted March 17, 2007 CID Share Posted March 17, 2007 I dunno how to insert an image here but here are my settings. May I also remind you that the cell site is just 3 blocks from my location (i don't know if that matters). Configuration => Quality of Service (QoS) Canopy Lite - 5.7GHz - Subscriber Module - 0a-00-3e-f9-31-29 MIR Bandwidth Settings (Uplink + Downlink) Sustained Data Rate <= 1000 kbps Sustained Uplink Data Rate : 500 (kbps) (Range: 0-- 1000 kbps) Sustained Downlink Data Rate : 500 (kbps) (Range: 0-- 1000 kbps) Uplink Burst Allocation : 1500 (kbits) (Range: 0 -- 1500 kbits) Downlink Burst Allocation : 1500 (kbits) (Range: 0 -- 1500 kbits) CIR Bandwidth Settings Low Priority Uplink CIR : 100 (kbps) (Range: 0 -- 100 kbps) Low Priority Downlink CIR : 100 (kbps) (Range: 0 -- 100 kbps) Hi Priority Channel : Enabled Hi Priority Uplink CIR : 100 (kbps) (Range: 0 -- 100 kbps) Hi Priority Downlink CIR : 100 (kbps) (Range: 0 -- 100 kbps) Quote Link to comment Share on other sites More sharing options...
archramosxxx Posted March 17, 2007 CID Share Posted March 17, 2007 Oh by the way, I'm not using any download or internet accelerators... Hehehe! Quote Link to comment Share on other sites More sharing options...
archramosxxx Posted March 17, 2007 CID Share Posted March 17, 2007 I also tweaked the Windows Bandwidth. Apparently, Windows is using 20% of your Internet Bandwidth for its own use. I took back that 20%. To do this, follow the instructions in this article. http://www.lockergnome.com/nexus/news/2006/06/01/how-to-take-back-20-of-your-bandwidth-from-windows-xp/ Hope this helps. Happy surfing!!! Quote Link to comment Share on other sites More sharing options...
archramosxxx Posted March 17, 2007 CID Share Posted March 17, 2007 Lastly... this is for Firefox users... Tweak your settings to make it load pages faster. Type "about:config" into the address bar and hit return. Scroll down and look for the following entries: network.http.pipelining network.http.proxy.pipelining network.http.pipelining.maxrequests Normally the browser will make one request to a web page at a time. When you enable pipelining it will make several at once, which really speeds up page loading. Alter the entries as follows: Set "network.http.pipelining" to "true" Set "network.http.proxy.pipelining" to "true" Set "network.http.pipelining.maxrequests" to some number like 30. This means it will make 30 requests at once. Lastly right-click anywhere and select New-> Integer. Name it "nglayout.initialpaint.delay" and set its value to "0". This value is the amount of time the browser waits before it acts on information it receives. Got this info here: http://www.masternewmedia.org/news/2005/02/04/firefox_speed_boost_tweak_tips.htm I think I've posted enough to make your connection much much faster... Cheers! Quote Link to comment Share on other sites More sharing options...
chrazel Posted March 19, 2007 CID Share Posted March 19, 2007 hi peeps! just got my smart bro activated yesterday... tested it yesterday, nasa 260-285Kbps lang. after some tweakin, eto na results :::.. Download Stats ..::: Download Connection is:: 374 Kbps about 0.4 Mbps (tested with 1013 kB) Download Speed is:: 46 kB/s Tested From:: https://testmy.net/ (Server 1) Test Time:: 2007/03/18 - 5:24pm Bottom Line:: 7X faster than 56K 1MB Download in 22.26 sec Tested from a 1013 kB file and took 22.172 seconds to complete Download Diagnosis:: Awesome! 20% + : 46.09 % faster than the average for host (247.182) D-Validation Link:: https://testmy.net/stats/id-Q52W8Z4IC User Agent:: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322) [!] Quote Link to comment Share on other sites More sharing options...
chrazel Posted March 19, 2007 CID Share Posted March 19, 2007 another test Quote Link to comment Share on other sites More sharing options...
angelo_0700 Posted March 19, 2007 CID Share Posted March 19, 2007 anyone knows how to port forward in smart bro Quote Link to comment Share on other sites More sharing options...
just- Posted March 19, 2007 CID Share Posted March 19, 2007 anyone knows how to port forward in smart bro this would be a good guide anyone know how to do it and want to make a guide for it ? Quote Link to comment Share on other sites More sharing options...
joserizal Posted March 20, 2007 CID Share Posted March 20, 2007 anyone knows how to port forward in smart bro Not possible for port forwarding.. smartbro is using non-routable address. 192.168.x.x... If you want to access your home web server.. you need to install ipv6 and tunnel broker... you will be given a free ipv6 address. http://go6.net Quote Link to comment Share on other sites More sharing options...
crazyhog Posted March 20, 2007 CID Share Posted March 20, 2007 from DAVAO. hi im newbie here. I'm not a SmartBro subscriber but wondering why u got SLOW speed unlike from Davao Smartbro subscriber? Mostly they avg. 500kbps plus. FYI, nag upgrade ang SmartBro to 512kb/s from 384. Same with ur area b? look here: http://www.davaosale.com/main7895157/viewtopic.php?t=42482 not sure kung pwede direct link or u must register first. its on GENERAL CHAT. .then SPEEDTEST W/ SMARTBRO. but infairness ang GALING S TWEAKING. pwede p kaya rin d2 s amin? mas LALAKAS. Quote Link to comment Share on other sites More sharing options...
archramosxxx Posted March 20, 2007 CID Share Posted March 20, 2007 from DAVAO. hi im newbie here. I'm not a SmartBro subscriber but wondering why u got SLOW speed unlike from Davao Smartbro subscriber? Mostly they avg. 500Kbps plus. FYI, nag upgrade ang SmartBro to 512kB/s from 384. Same with ur area b? look here: http://www.davaosale.com/main7895157/viewtopic.php?t=42482 not sure kung pwede direct link or u must register first. its on GENERAL CHAT. .then SPEEDTEST W/ SMARTBRO. but infairness ang GALING S TWEAKING. pwede p kaya rin d2 s amin? mas LALAKAS. Here are my stats from testmy.net and here's my stats from your speedtest... The funny thing is, when I used speedtest.net and chose the Pakistan server (which is much closer than Dallas, Texas), I got a lower speed... I got 128 kbps. So I'm thinking that maybe speedtest.net's stats are 'inaccurate'? Quote Link to comment Share on other sites More sharing options...
josh2035 Posted March 23, 2007 CID Share Posted March 23, 2007 mga tol, pano ba pag nagalaw ung lahat ng settings ng CANOPY page, nagalaw ko kc e lahat pinagexperimen2han ko. hehehe ayun nawala ang connection. wala na me internet, d pa me natawag sa costuner care baka kc magkaproblem ng malaki pag 2mawag me sa kanila. well mga tol pa help nmn sa inyo, pano ko ba iba2lik sa dati un, try ko na restore to default settings e, kaso ganun pa din, talagang nawala ang connection ng internet. pahingi nmn ng addvice sa lahat, kung anu dapat na hakbang na ga2win ko para bumalik ung connection ko. thx Quote Link to comment Share on other sites More sharing options...
sirkeled Posted March 24, 2007 CID Share Posted March 24, 2007 I have a question for those who have fast connection speeds. How much free hard disk space do you have? I called SmartBro customer care again and they told me that my slow connection could be due to my low hard disk space (14 GB). I just want to confirm this before I buy additional memory/HDD. Thanks! Quote Link to comment Share on other sites More sharing options...
archramosxxx Posted March 24, 2007 CID Share Posted March 24, 2007 I have a question for those who have fast connection speeds. How much free hard disk space do you have? I called SmartBro customer care again and they told me that my slow connection could be due to my low hard disk space (14 GB). I just want to confirm this before I buy additional memory/HDD. Thanks! And who told you that? You should remember his/her name because it is absolutely BULL$$$$ (sorry...) If I have a Windows 98 machine with 64 mb of memory and 2 gigs of harddrive space, I could still make it to work properly. Quote Link to comment Share on other sites More sharing options...
sirkeled Posted March 25, 2007 CID Share Posted March 25, 2007 ^I see. I'll let them know that. Thanks. But anyway, could you people give me an advice on how to talk to their CSR and get them to do something other than type a freaking report? They keep on saying that they have already reported/escalated the complaint to their technical staff. I've called them 5 times already and they keep saying the same thing. Quote Link to comment Share on other sites More sharing options...
sirkeled Posted March 26, 2007 CID Share Posted March 26, 2007 BTW, can anyone of you give me the default canopy settings? I'm going to reset it because a technician might visit our place. Just to be safe. Thanks! Quote Link to comment Share on other sites More sharing options...
pusakal Posted March 27, 2007 CID Share Posted March 27, 2007 have you guys tried to change your base station/color code in the canopy settings? Quote Link to comment Share on other sites More sharing options...
sirkeled Posted March 27, 2007 CID Share Posted March 27, 2007 ^Nope. Why? What would be the effect? Quote Link to comment Share on other sites More sharing options...
pusakal Posted March 27, 2007 CID Share Posted March 27, 2007 it somehow changes my connection speed and i can monitor how much user is connected at the base station i'm on hehehe. Quote Link to comment Share on other sites More sharing options...
angelo_0700 Posted March 27, 2007 CID Share Posted March 27, 2007 can you post it on how to... i'd like to reposition my canopy to other base station Quote Link to comment Share on other sites More sharing options...
sirkeled Posted March 27, 2007 CID Share Posted March 27, 2007 it somehow changes my connection speed and i can monitor how much user is connected at the base station i'm on hehehe. Can you share it with us? Quote Link to comment Share on other sites More sharing options...
smart burat.. Posted March 28, 2007 CID Share Posted March 28, 2007 Hey, I do that too... the color code is referring to the base station your in.. you can change color code/base station depending on the range of your canopy, go to AP evaluation then you should have a list of some sort search for the color code then check its activity.. I'll post visual steps later. so hang on guys. smart burat!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.