RavenX Posted December 30, 2006 CID Share Posted December 30, 2006 I recently formatted my computer, installed the operating system, updated to sp 2 and did the tweek guide from dslreports.com here is what I got from my tweek test results. http://www.dslreports.com/tweakr/block:1e08ba6?service=cable&speed=8000&os=winXP&via=normal its telling me that everything is fine. This is what I get when I do the speedtest on here. ::::::::::.. Download Stats ..:::::::::: Download Connection is:: 1649 Kbps about 1.6 Mbps (tested with 2992 kB) Download Speed is:: 201 kB/s Tested From:: https://testmy.net/ (Server 2) Test Time:: 2006/12/30 - 3:21pm Bottom Line:: 29X faster than 56K 1MB Download in 5.09 sec Tested from a 2992 kB file and took 14.859 seconds to complete Download Diagnosis:: May need help : running at only 29.95 % of your hosts average (Comcast.net) D-Validation Link:: https://testmy.net/stats/id-CFIB28SAO User Agent:: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322) Before its been telling me my download speed is around 1meg. I'm not sure what I have to do, any help? thanks. Also I'm paying for the 8mb/s speeds. Quote Link to comment Share on other sites More sharing options...
VanBuren Posted December 30, 2006 CID Share Posted December 30, 2006 welcome to the forum RavenX do a tracert start-run-cmd then type tracert testmy.net rightclick choose all and hit enter now paste all in a new post VanBuren Quote Link to comment Share on other sites More sharing options...
RavenX Posted December 30, 2006 Author CID Share Posted December 30, 2006 Tracing route to testmy.net [67.18.179.85] over a maximum of 30 hops: 1 13 ms 8 ms 16 ms 73.42.220.1 2 8 ms 7 ms 7 ms 68.86.140.41 3 11 ms 16 ms 8 ms 68.87.191.217 4 9 ms 7 ms 9 ms 68.87.191.213 5 9 ms 8 ms 13 ms 68.87.191.209 6 21 ms 14 ms 16 ms 68.87.191.206 7 13 ms 14 ms 12 ms pos-6-1-ar01.taylor.mi.michigan.comcast.net [68. 87.191.149] 8 13 ms 14 ms 16 ms 12.116.11.101 9 52 ms 41 ms 50 ms tbr1013001.dtrmi.ip.att.net [12.123.139.146] 10 47 ms 49 ms 47 ms tbr1-cl28.sl9mo.ip.att.net [12.122.12.186] 11 46 ms 44 ms 65 ms tbr2-cl6.dlstx.ip.att.net [12.122.10.90] 12 55 ms 47 ms 43 ms gar1-p3100.dlrtx.ip.att.net [12.123.16.165] 13 48 ms 46 ms 46 ms 12.119.136.14 14 47 ms 46 ms 44 ms te9-1.dsr01.dllstx3.theplanet.com [70.87.253.6] 15 47 ms 48 ms 48 ms vl41.dsr01.dllstx4.theplanet.com [70.85.127.83] 16 44 ms 45 ms 45 ms gi1-0-2.car17.dllstx4.theplanet.com [67.18.116.8 5] 17 45 ms 44 ms 45 ms 55.b3.1243.static.theplanet.com [67.18.179.85] Trace complete. Quote Link to comment Share on other sites More sharing options...
Sparticus Posted December 30, 2006 CID Share Posted December 30, 2006 Tracing route to testmy.net [67.18.179.85] over a maximum of 30 hops: 1 13 ms 8 ms 16 ms 73.42.220.1 2 8 ms 7 ms 7 ms 68.86.140.41 3 11 ms 16 ms 8 ms 68.87.191.217 4 9 ms 7 ms 9 ms 68.87.191.213 5 9 ms 8 ms 13 ms 68.87.191.209 6 21 ms 14 ms 16 ms 68.87.191.206 7 13 ms 14 ms 12 ms pos-6-1-ar01.taylor.mi.michigan.Comcast.net [68. 87.191.149] 8 13 ms 14 ms 16 ms 12.116.11.101 9 52 ms 41 ms 50 ms tbr1013001.dtrmi.ip.att.net [12.123.139.146] 10 47 ms 49 ms 47 ms tbr1-cl28.sl9mo.ip.att.net [12.122.12.186] 11 46 ms 44 ms 65 ms tbr2-cl6.dlstx.ip.att.net [12.122.10.90] 12 55 ms 47 ms 43 ms gar1-p3100.dlrtx.ip.att.net [12.123.16.165] 13 48 ms 46 ms 46 ms 12.119.136.14 14 47 ms 46 ms 44 ms te9-1.dsr01.dllstx3.theplanet.com [70.87.253.6] 15 47 ms 48 ms 48 ms vl41.dsr01.dllstx4.theplanet.com [70.85.127.83] 16 44 ms 45 ms 45 ms gi1-0-2.car17.dllstx4.theplanet.com [67.18.116.8 5] 17 45 ms 44 ms 45 ms 55.b3.1243.static.theplanet.com [67.18.179.85] Trace complete. Welcome to the forum! Nice pings, have you tried tweaking? Quote Link to comment Share on other sites More sharing options...
TimPawlak Posted December 31, 2006 CID Share Posted December 31, 2006 yes, welcome to the fourms.. and those are great pings.. ATT backbone rocks! Quote Link to comment Share on other sites More sharing options...
VanBuren Posted December 31, 2006 CID Share Posted December 31, 2006 1. Your Tweakable Settings: Receive Window (RWIN): 150380 Window Scaling: 2 Path MTU Discovery: ON RFC1323 Window Scaling: ON RFC1323 Time Stamping: OFF Selective Acks: ON MSS requested: 1460 TTL: (less any hops behind firewall) 127 TTL remaining: 112 2. Test Download Actual data bytes sent: 1024001 Actual data packets: 703 Max packet sent (MTU): 1500 Max packet recd (MTU): 1500 Retransmitted packets: 0 sacks you sent: 0 pushed data pkts: 102 data transmit time: 1.064 secs our max idletime: 172.5 ms transfer rate: 804830 bytes/sec transfer rate: 6438 kbits/sec transfer efficiency: 100% 3. ICMP (ping) check Minimum ping: 30.64 ms Maximum ping: 43.35 ms Ping stability: 43.35 32.55 - 30.64 31.11 31.17 34.02 32.76 42.79 34.41 Loss at 56byte pkts: 0% Loss at 1000byte pkts: 0% Average Big ping: 37 ms Big ping stability: 36.29 36.99 35.19 34.16 36.81 35.50 37.67 35.14 50.86 50.35 40.60 35.11 34.36 34.02 34.20 34.16 47.48 39.77 36.28 41.00 45.99 47.12 34.39 35.94 35.44 39.34 33.31 33.77 33.84 34.79 ms Notes and recommendations: RWIN is in range Looking good Observations: Good data stream (no/few rexmits) Observations: Run a line quality test Check tweak FAQ trace seems fine, that makes me suspect there is some problem with modem. What modem do you have? Also did you use to get around 8 Mbps before? VanBuren Quote Link to comment Share on other sites More sharing options...
RavenX Posted December 31, 2006 Author CID Share Posted December 31, 2006 yes, I used to get around 8mb/s before, Its just since the reformat, my speed tests at testmy.net have been really low. Sparticus I've done a tweak test which tells me everything is running fine, so not sure what else I have to check for. http://www.dslreports.com/tweakr/block:1e08ba6?service=cable&speed=8000&os=winXP&via=normal Quote Link to comment Share on other sites More sharing options...
coknuck Posted December 31, 2006 CID Share Posted December 31, 2006 Are you connected Ethernet or USB, and do you have Cablenut? Quote Link to comment Share on other sites More sharing options...
RavenX Posted December 31, 2006 Author CID Share Posted December 31, 2006 ethernet, and no I don't have cablenut Quote Link to comment Share on other sites More sharing options...
coknuck Posted December 31, 2006 CID Share Posted December 31, 2006 Go here http://www.testmy.net/topic-1013 and get Cablenut 4.08zip file and version 6 zip. or get all the versions. Once you in stall Cablenut 4.08 You can use the setting provided in the versions. After you apply the version file that matches the closest to your speed reboot your computer for the settings to take place. Quote Link to comment Share on other sites More sharing options...
clayjjojo Posted December 31, 2006 CID Share Posted December 31, 2006 what is cablenut? Quote Link to comment Share on other sites More sharing options...
coknuck Posted December 31, 2006 CID Share Posted December 31, 2006 Cablenut is a program that lets you change the setting in your RWIN.The VanBuren versions work with this program. Read here for more expansion http://www.cablenut.com/ . Quote Link to comment Share on other sites More sharing options...
clayjjojo Posted December 31, 2006 CID Share Posted December 31, 2006 thank you Quote Link to comment Share on other sites More sharing options...
coknuck Posted December 31, 2006 CID Share Posted December 31, 2006 RavenX, I read your first post again and started thinking (I know that can be dangerous). After you reformatted did you reinstall the drivers to your Ethernet or just use the generic ones in Windows. Quote Link to comment Share on other sites More sharing options...
RavenX Posted December 31, 2006 Author CID Share Posted December 31, 2006 hmm I can't remember, but im going to go and download the latest drivers. and give that a try. I've read about the cablenut program and from the tweak test, my rwin is set normal to 150380. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.