Jump to content

Help make it faster


Can u make it faster? :D  

5 members have voted

  1. 1. Can u make it faster? :D

    • Yes
      4
    • No
      1


Recommended Posts

Hi ijust upgraded my service to 3000/416 and I get speeds of

:::.. Download Stats ..:::

Connection is:: 2534 Kbps about 2.5 Mbps (tested with 2992 KB)

Download Speed is:: 294 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 45 times faster than 56K you can download 1MB in 3.31 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=DKA7LWSUR

:::.. Upload Stats ..:::

Connection is:: 408 Kbps about 0.4 Mbps (tested with 1013 KB)

Upload Speed is:: 50 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 7 times faster than 56K you can upload 1MB in 20.48 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=9CY1DI4Z6

Microsoft Windows XP [Version 5.1.2600]

© Copyright 1985-2001 Microsoft Corp.

C:>tracert testmy.net

Tracing route to testmy.net [67.19.36.6]

over a maximum of 30 hops:

Link to post
Share on other sites

Thank you very much Imma try it rit now it doesnt matter that I use pppoe or not rit the settings work fine in normal and pppoe rit? Imma post the results rit after I reboot!

It do matters if you using PPPoE or not

PPPoE has a MTU of 1492, win XP has a bug that limit the MTU to 1480 if your not using a router

other DSL has 1500 as MTU

i made the file from the MTU you had on that tweaktest

VanBuren :)

Link to post
Share on other sites

Whoa ur genius man look at my speed

:::.. Download Stats ..:::

Connection is:: 2549 Kbps about 2.5 Mbps (tested with 2992 KB)

Download Speed is:: 311 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 46 times faster than 56K you can download 1MB in 3.29 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=VSNLE0I6O

Link to post
Share on other sites

:::.. Download Stats ..:::

Connection is:: 2547 Kbps about 2.5 Mbps (tested with 2992 KB)

Download Speed is:: 311 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 45 times faster than 56K you can download 1MB in 3.29 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=8JKPTYEXR

Still same this is like 80% rit witch means it can get higher rit?

Link to post
Share on other sites

:::.. Upload Stats ..:::

Connection is:: 359 Kbps about 0.4 Mbps (tested with 579 KB)

Upload Speed is:: 44 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 6 times faster than 56K you can upload 1MB in 23.27 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=VBO27WR4A

whats something i can do for my upload . . . :P it completely sucks . . ahhh

Link to post
Share on other sites

:::.. Download Stats ..:::

Connection is:: 2547 Kbps about 2.5 Mbps (tested with 2992 KB)

Download Speed is:: 311 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 45 times faster than 56K you can download 1MB in 3.29 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=8JKPTYEXR

Still same this is like 80% rit witch means it can get higher rit?

I dont think you will get anymore then that

VanBuren :)

Link to post
Share on other sites

:::.. Upload Stats ..:::

Connection is:: 359 Kbps about 0.4 Mbps (tested with 579 KB)

Upload Speed is:: 44 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 6 times faster than 56K you can upload 1MB in 23.27 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=VBO27WR4A

whats something i can do for my upload . . . :P it completely sucks . . ahhh

Make a new thread and post the info i ask for in that thread, just follow these steps and post again https://testmy.net/forum/index.php?topic=605.0

VanBuren :)

Link to post
Share on other sites

I use Win XP SBC Yahoo DSL 3000/436 here is the url for tweak test http://ttester.broadbandreports.com/tweak/block:47cdded?service=dsl&speed=3000&os=winXP&via=winXPpppoe Microsoft Windows XP [Version 5.1.2600]

© Copyright 1985-2001 Microsoft Corp.

C:Documents and Settingsulzii3>tracert testmy.net

Tracing route to testmy.net [67.19.36.6]

over a maximum of 30 hops:

Link to post
Share on other sites

It was all same if you need anymore information from me ask so u can make that custom settings correctly

open cablenut adjuster and make a screenshot of your current settings

also why did you start i new thread? I merged it to this one, and i dont think you will go faster then this

VanBuren :)

Link to post
Share on other sites

TCP/Web100 Network Diagnostic Tool v5.2.1e

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 505.91Kb/s

running 10s inbound test (server to client) . . . . . . 2.48Mb/s

Your PC is connected to a Cable/DSL modem

click START to re-test

More Details:WEB100 Kernel Variables:

Client: localhost/127.0.0.1

AckPktsIn: 1082

AckPktsOut: 0

BytesRetrans: 0

CongAvoid: 0

CongestionOverCount: 0

CongestionSignals: 0

CountRTT: 1082

CurCwnd: 116640

CurMSS: 1440

CurRTO: 560

CurRwinRcvd: 115200

CurRwinSent: 5840

CurSsthresh: 2147483647

DSACKDups: 0

DataBytesIn: 0

DataBytesOut: 3196800

DataPktsIn: 0

DataPktsOut: 2220

DupAcksIn: 0

ECNEnabled: 0

FastRetran: 0

MaxCwnd: 116640

MaxMSS: 1440

MaxRTO: 570

MaxRTT: 370

MaxRwinRcvd: 115200

MaxRwinSent: 5840

MaxSsthresh: 0

MinMSS: 1440

MinRTO: 280

MinRTT: 80

MinRwinRcvd: 57600

MinRwinSent: 5840

NagleEnabled: 1

OtherReductions: 0

PktsIn: 1082

PktsOut: 2220

PktsRetrans: 0

X_Rcvbuf: 103424

SACKEnabled: 3

SACKsRcvd: 1

SendStall: 0

SlowStart: 79

SampleRTT: 360

SmoothedRTT: 360

X_Sndbuf: 103424

SndLimTimeRwin: 8948564

SndLimTimeCwnd: 1110099

SndLimTimeSender: 3364

SndLimTransRwin: 1

SndLimTransCwnd: 1

SndLimTransSender: 1

SndLimBytesRwin: 2859840

SndLimBytesCwnd: 336960

SndLimBytesSender: 0

SubsequentTimeouts: 0

SumRTT: 371790

Timeouts: 0

TimestampsEnabled: 0

WinScaleRcvd: 1

WinScaleSent: 7

DupAcksOut: 0

StartTimeUsec: 943830

Duration: 10070601

c2sData: 2

c2sAck: 2

s2cData: 9

s2cAck: 3

Checking for mismatch condition

(cwndtime > .3) [0.11>.3], (MaxSsthresh > 0) [0>0],

(PktsRetrans/sec > 2) [0>2], (estimate > 2) [31.97>2]

Checking for mismatch on uplink

(speed > 50 [2.54>50], (xmitspeed < 5) [0.50<5]

(rwintime > .9) [0.88>.9], (loss < .01) [1.0E<.01]

Checking for excessive errors condition

(loss/sec > .15) [1.0E>.15], (cwndtime > .6) [0.11>.6],

(loss < .01) [1.0E<.01], (MaxSsthresh > 0) [0>0]

Checking for 10 Mbps link

(speed < 9.5) [2.54<9.5], (speed > 3.0) [2.54>3.0]

(xmitspeed < 9.5) [0.50<9.5] (loss < .01) [1.0E<.01], (link > 0) [100>0]

Checking for Wireless link

(sendtime = 0) [3.34=0], (speed < 5) [2.54<5]

(Estimate > 50 [31.97>50], (Rwintime > 90) [0.88>.90]

(RwinTrans/CwndTrans = 1) [1/1=1], (link > 0) [100>0]

Checking for DSL/Cable Modem link

(speed < 2) [2.54<2], (SndLimTransSender = 0) [1=0]

(SendTime = 0) [3.3432627441766955E-4=0], (link > 0) [100>0]

Checking for half-duplex condition

(rwintime > .95) [0.88>.95], (RwinTrans/sec > 30) [0.10>30],

(SenderTrans/sec > 30) [0.10>30], OR (link <= 10) [100<=10]

Checking for congestion

(cwndtime > .02) [0.11>.02], (mismatch = 0) [0=0]

(MaxSsthresh > 0) [0>0]

bw = 31.97 based on packet size = 11Kbits, RTT = 343.61msec, and loss = 1.0E-6

The theoretical network limit is 31.97 Mbps

The transmit buffer (101.0 KByte) limits the application to 2.29 Mbps

Your receive buffer (112.0 KByte) limits the application to 2.55 Mbps

The network based flow control limits the application to 2.58 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet'

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 505.91Kb/s

running 10s inbound test (server to client) . . . . . . 2.48Mb/s

------  Client System Details  ------

OS data: Name = Windows XP, Architecture = x86, Version = 5.1

Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

No network congestion discovered.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 343.61 msec; the Packet size = 1440 Bytes; and

No packet loss was observed.

This connection is receiver limited 88.93% of the time.

  Increasing the current receive buffer (112.0 KB) will improve performance

This connection is network limited 11.03% of the time.

    Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Information: Network Middlebox is modifying MSS variable

Server IP addresses are preserved End-to-End

Client IP addresses are preserved End-to-End

Statistics:

Link to post
Share on other sites

DO I really need to upgrade to sp2 cause when I did it b4 like two times when someone told me to do it i had so much problems with internet connections and accessing some webs like testing speed in testmy.net and stuff so many problems! And witch setting should I use the 3000/416 one or 3500/500 or the one from the folder

Link to post
Share on other sites

DO I really need to upgrade to sp2 cause when I did it b4 like two times when someone told me to do it i had so much problems with internet connections and accessing some webs! And witch setting should I use the 3000/416 one or 3500/500 or the one from the folder  3000/384? and is there any other way I can get the isp to read AFD parameters Thank U

try the 3000/416 first and make a speedtest, then try the 3500/500 and compare what file that works best for you.

you will need SP2

http://www.broadbandnuts.com/index.php?op=articles;id=9

VanBuren :)

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...