Jump to content

Weird...


Sin0cide

Recommended Posts

That is the first time I tweaked Qos like that. Thanks for the procedure. But would it not be easier to go into your network connections and just delete the protocol QoS altogether? That is usually what I have done. I figure if the protocol is not installed it won't run. Do not know if I am right or not? In fact, I delete every protocol in my Network Connection: Properties: except Tcp/Ip. Do not use File and Printer Sharing even though I could. Also do not need Client for Microsoft Networks. This way I have nothing interfering with my main protocol.

Link to comment
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

That is the first time I tweaked Qos like that. Thanks for the procedure. But would it not be easier to go into your network connections and just delete the protocol QoS altogether? That is usually what I have done. I figure if the protocol is not installed it won't run. Do not know if I am right or not? In fact, I delete every protocol in my Network Connection: Properties: except Tcp/Ip. Do not use File and Printer Sharing even though I could. Also do not need Client for Microsoft Networks. This way I have nothing interfering with my main protocol.

Link to comment
Share on other sites

That is the first time I tweaked Qos like that. Thanks for the procedure. But would it not be easier to go into your network connections and just delete the protocol QoS altogether? That is usually what I have done. I figure if the protocol is not installed it won't run. Do not know if I am right or not? In fact, I delete every protocol in my Network Connection: Properties: except Tcp/Ip. Do not use File and Printer Sharing even though I could. Also do not need Client for Microsoft Networks. This way I have nothing interfering with my main protocol.

Link to comment
Share on other sites

::: Download Stats :::

Connection is: 5522 Kbps about 5.5 Mbps (tested with 1496 KB)

Download Speed is: 674 KB/sec

Auth Code: 2082831 (validate a http://www.testmy.net)

Bottom Line: 99 times faster than 56K you can download 1MB in 1.52 second(s)

Validation Link :: https://testmy.net/cgi-bin/auth_check.cgi?ta=&top=&num=2082831&kbps=5522&gen=gen&a=10.2857142857143&b=0.571428571428571&c=1145.14285714286

I do not think I want to mess with anything. I will let the numbers speak for themselves! :D

Link to comment
Share on other sites

::: Download Stats :::

Connection is: 5522 Kbps about 5.5 Mbps (tested with 1496 KB)

Download Speed is: 674 KB/sec

Auth Code: 2082831 (validate a http://www.testmy.net)

Bottom Line: 99 times faster than 56K you can download 1MB in 1.52 second(s)

Validation Link :: https://testmy.net/cgi-bin/auth_check.cgi?ta=&top=&num=2082831&kbps=5522&gen=gen&a=10.2857142857143&b=0.571428571428571&c=1145.14285714286

I do not think I want to mess with anything. I will let the numbers speak for themselves! :D

Link to comment
Share on other sites

::: Download Stats :::

Connection is: 5522 Kbps about 5.5 Mbps (tested with 1496 KB)

Download Speed is: 674 KB/sec

Auth Code: 2082831 (validate a http://www.testmy.net)

Bottom Line: 99 times faster than 56K you can download 1MB in 1.52 second(s)

Validation Link :: https://testmy.net/cgi-bin/auth_check.cgi?ta=&top=&num=2082831&kbps=5522&gen=gen&a=10.2857142857143&b=0.571428571428571&c=1145.14285714286

I do not think I want to mess with anything. I will let the numbers speak for themselves! :D

Link to comment
Share on other sites

::: Download Stats :::

Connection is: 5522 Kbps about 5.5 Mbps (tested with 1496 KB)

Download Speed is: 674 KB/sec

Auth Code: 2082831 (validate a http://www.testmy.net)

Bottom Line: 99 times faster than 56K you can download 1MB in 1.52 second(s)

Validation Link :: https://testmy.net/cgi-bin/auth_check.cgi?ta=&top=&num=2082831&kbps=5522&gen=gen&a=10.2857142857143&b=0.571428571428571&c=1145.14285714286

I do not think I want to mess with anything. I will let the numbers speak for themselves! :D

Link to comment
Share on other sites

By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default.

If you enable this setting, you can use the "Bandwidth limit" box to adjust the amount of bandwidth the system can reserve.

If you disable this setting or do not configure it, the system uses the default value of 20 percent of the connection.

If you delete it then it would also stop it but I am not sure if it has any benefits...

Link to comment
Share on other sites

By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default.

If you enable this setting, you can use the "Bandwidth limit" box to adjust the amount of bandwidth the system can reserve.

If you disable this setting or do not configure it, the system uses the default value of 20 percent of the connection.

If you delete it then it would also stop it but I am not sure if it has any benefits...

Link to comment
Share on other sites

By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default.

If you enable this setting, you can use the "Bandwidth limit" box to adjust the amount of bandwidth the system can reserve.

If you disable this setting or do not configure it, the system uses the default value of 20 percent of the connection.

If you delete it then it would also stop it but I am not sure if it has any benefits...

Link to comment
Share on other sites

By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default.

If you enable this setting, you can use the "Bandwidth limit" box to adjust the amount of bandwidth the system can reserve.

If you disable this setting or do not configure it, the system uses the default value of 20 percent of the connection.

If you delete it then it would also stop it but I am not sure if it has any benefits...

Link to comment
Share on other sites

A few questions:

Is this for download speed only?

I'm already nearing speed caps here, does it still have an effect?

Is it WinXp only, or does it work for Win98 too?

I second that. I don't think I can get any faster than I am right now.

Link to comment
Share on other sites

A few questions:

Is this for download speed only?

I'm already nearing speed caps here, does it still have an effect?

Is it WinXp only, or does it work for Win98 too?

I second that. I don't think I can get any faster than I am right now.

Link to comment
Share on other sites

A few questions:

Is this for download speed only?

I'm already nearing speed caps here, does it still have an effect?

Is it WinXp only, or does it work for Win98 too?

I second that. I don't think I can get any faster than I am right now.

Link to comment
Share on other sites

A few questions:

Is this for download speed only?

I'm already nearing speed caps here, does it still have an effect?

Is it WinXp only, or does it work for Win98 too?

I second that. I don't think I can get any faster than I am right now.

Link to comment
Share on other sites

As far as I know it only comes in WinXP Home and Pro versions. Are you sure that QoS defaults to 20% even if it is not checked as being used under your network protocols?

I am not sure I couldn't find any proof that it wasn't but I am sure windows has it built in somehow... LOL :x

Link to comment
Share on other sites


×
×
  • Create New...