Jump to content

How To Tweak Smart BRO WiFi


elijahpaul

Recommended Posts

Here is the steps:

1) Once you are now in the canopy platform, click on the tools, then click on AP Evaluation. You will see a  list of access points. Look for the RSSI with higher value and get the corresponding color code.

2)Go to Configuration and click Radio. ( remember the default color code )

Change the color code with the new one.

3) save changes and then reboot.

:evil6:

Link to comment
Share on other sites

well. I did find a better color, thanks to you guys!  :grin:, i thinkg my connection is getting better, but the speed gotten really on the downhill..

:::.. testmy.net test results ..:::

Download Connection is:: 113 Kbps about 0.11 Mbps (tested with 386 kB)

Download Speed is:: 14 kB/s

Upload Connection is:: 240 Kbps about 0.2 Mbps (tested with 579 kB)

Upload Speed is:: 29 kB/s

Tested From:: https://testmy.net (Server 1)

Test Time:: 2007/06/18 - 3:34am

D-Validation Link:: https://testmy.net/stats/id-TPWRJ9L67

U-Validation Link:: https://testmy.net/stats/id-8V1RE25CJ

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4 [!]

.

when I rebooted the canopy, it automatically redirected me to the portal, and asked if its ok to change the settings??

would this be "legal" im not going to get in trouble with smart for changing something would i? hehehe.

Link to comment
Share on other sites

Oh! and by the way. When you say reboot...

is it the reboot on the canopy??

or reboot for the whole computer? 

me <-  :idiot2:  I know its a stupid question, but I'd just like to clarify.

Coz I tried to click on the reboot ont eh canopy. and Im not really sure what happened...  :sad:

Link to comment
Share on other sites

the highest RSSI that I got is 279  :sad:

But I got a quick and steady connection on this. Actually Im using it right now.

now whats more concerning is. that when I looked on the AP list and found the default color code I sued to have.

Index: 1 Frequency: 5755.0 MHz ESN: 0a-00-3e-f2-36-a0

Jitter: 7 RSSI: 245 Power Level: -76 Beacon Count: 5 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 13 Range: 4165 feet TxBER: 1 EBcast: 1

Session Count: 2 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1774 SectorID: 4 Color Code: 112 BeaconVersion: 1 SectorUserCount: 40

Frequency: 5755 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

take note on the SectorUserCount!!!!

pther AP have below 30.

now what im thingking is that, it may have too many users?? Im just guessing...

Link to comment
Share on other sites

i have a question, i also do this color code thing.

i keep on changing color codes everytime i got poor connection, but the thing is when i switch to a color code with a high RSSI value, i cant upload anything....

wala akong upload stats. download lang. what seems to be the problem?

Link to comment
Share on other sites

wont the constant changing of the colorcode mess up our smart registry/registration  or something??

now im really worried..  :undecided:

right now. I got a steady connection, but my speed is crap compared to before that has above average but keeps me getting me disconnected.

Link to comment
Share on other sites

The connection has timed out

The server at 169.254.1.1 is taking too long to respond.

    *  The site could be temporarily unavailable or too busy. Try again in a few

          moments.

    *  If you are unable to load any pages, check your computer's network

          connection.

    *  If your computer or network is protected by a firewall or proxy, make sure

          that Firefox is permitted to access the Web.

after following those steps dictated above. This would appear after changing the ip. Is my motorola canopy blocked? Is there any solution for this? pls help..

Link to comment
Share on other sites

@drizzt1911 di naman makasira yung palit ng palit ng color code. the best thing u can do is to report that to the CSR thru email.

wont they block my port or something?

well, i'll let it stay as it is. hehehe.

I'm already pissed off at smartbro. (paybacks a B**ch!)

Link to comment
Share on other sites

this is my connection right now.

like I said , it turned for the worse. Dont know why tho. since Im using the highest RSSI that I can find on the AP list. Maybe I'll try another one.

:::.. testmy.net test results ..:::

Download Connection is:: 61 Kbps about 0.06 Mbps (tested with 97 kB)

Download Speed is:: 7 kB/s

Upload Connection is:: 123 Kbps about 0.1 Mbps (tested with 386 kB)

Upload Speed is:: 15 kB/s

Tested From:: https://testmy.net (Server 1)

Test Time:: 2007/06/18 - 5:45am

D-Validation Link:: https://testmy.net/stats/id-V4TAFC1XM

U-Validation Link:: https://testmy.net/stats/id-89EO4YTW2

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4 [!]

Link to comment
Share on other sites

Pare I'm also a smartbro victim, ang problema kasi is yung RSSI mo masyadong mababa less than 400, plus yung base station nyo i'm sure may sira, hindi makapagbigay ng tamang bandwidth. As I always suggest, make a documentation of your speedtest and complaints and email it to smartbro. That's the only way to improve your connection. Mabwebwesit kalang sa kakatweak ng PC mo di parin magbago.

latest status:

:::.. Download Stats ..:::

Download Connection is:: 553 Kbps about 0.6 Mbps (tested with 579 kB)

Download Speed is:: 68 kB/s

Tested From:: https://testmy.net/ (Server 1)

Test Time:: 2007/06/18 - 5:57am

Bottom Line:: 10X faster than 56K 1MB Download in 15.06 sec

Tested from a 579 kB file and took 8.578 seconds to complete

Download Diagnosis:: Awesome! 20% + : 37.91 % faster than the average for host (180.178)

D-Validation Link:: https://testmy.net/stats/id-AJRX0IUS6

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4;MEGAUPLOAD 1.0 [!]

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...