Jump to content

How To Tweak Smart BRO WiFi


elijahpaul

Recommended Posts

:::.. Download Stats ..:::

Download Connection is:: 27 Kbps about 0 Mbps (tested with 97 kB)

Download Speed is:: 3 kB/s

Tested From:: https://testmy.net/ (Main)

Test Time:: 2008/08/27 - 4:10am

Bottom Line:: 0X faster than 56K 1MB Download in 341.33 sec

Tested from a 97 kB file and took 29.234 seconds to complete

Download Diagnosis:: May need help : running at only 7.03 % of your hosts average (smartbro.net)

D-Validation Link:: https://testmy.net/stats/id-1XZ092LNI

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.16) Gecko/20080702 Firefox/2.0.0.14;MEGAUPLOAD 1.0 [!]

LOOK JUST LOOK! DAMN HOW AM I SUPPOSED TO DOWNLOAD WITH THAT SPEED?! CAN SOME1 HELP ME!!

my internet connection is smart bro.

Link to comment
Share on other sites

:::.. Download Stats ..:::

Download Connection is:: 373 Kbps about 0.4 Mbps (tested with 512 kB)

Download Speed is:: 46 kB/s

Tested From:: https://testmy.net/ (Main)

Test Time:: 2008/08/31 - 10:17am

Bottom Line:: 7X faster than 56K 1MB Download in 22.26 sec

Tested from a 512 kB file and took 11.235 seconds to complete

Download Diagnosis:: 90% + Okay : running at 97.64 % of your hosts average (smartbro.net)

D-Validation Link:: https://testmy.net/stats/id-YCL67DFTR

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.1) Gecko/2008070208 Firefox/3.0.1 [!]

HOW COME I"M SOOO SLOW??? do you think open dns is faster?

Link to comment
Share on other sites

i'm getting a pretty fast connection with my smartbro... i even have 2 computers connected to it..

and take note, im not using a router but instead im using a hub... so my internet connection is direct to the base...

one SM with 2 computers attached.. im using a hub.. what i did was changed the MAC address of my LAN card so it will be the same with the other one.

Link to comment
Share on other sites

:::.. Download Stats ..:::

Download Connection is:: 1571 Kbps about 1.6 Mbps (tested with 3072 kB)

Download Speed is:: 192 kB/s

Tested From:: https://testmy.net/ (Main)

Test Time:: 2008/09/01 - 4:06pm

Bottom Line:: 27X faster than 56K 1MB Download in 5.33 sec

Tested from a 3072 kB file and took 16.016 seconds to complete

Download Diagnosis:: Awesome! 20% + : 311.26 % faster than the average for host (smartbro.net)

D-Validation Link:: https://testmy.net/stats/id-W9IMVN0CO

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.1) Gecko/2008070208 Firefox/3.0.1 [!]

Link to comment
Share on other sites

hey guys.. my first post

:::.. Download Stats ..:::

Download Connection is:: 291 Kbps about 0.3 Mbps (tested with 1024 kB)

Download Speed is:: 36 kB/s

Tested From:: https://testmy.net/ (Main)

Test Time:: 2008/09/03 - 3:13am

Bottom Line:: 5X faster than 56K 1MB Download in 28.44 sec

Tested from a 1024 kB file and took 28.818 seconds to complete

Download Diagnosis:: May need help : running at only 76.18 % of your hosts average (smartbro.net)

D-Validation Link:: https://testmy.net/stats/id-TRGW7Y2A3

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.0.1) Gecko/2008070208 Firefox/2.0 MEGAUPLOAD 1.0 Googlebot 2. [!]

Link to comment
Share on other sites

  • 2 weeks later...

please help me....someone posted on the forums about smart bro proxy and someone suggested that ULTRA SURF would do fine...but after using it my net got slower and it can't be used for firefox....there was a tutorial there on how to use it on fire fox but fire fox simply kept saying that connection has been terminated or something....so i uninstalled it or deleted it...but after uninstalling it my connection keeps on fluctuating like after 1 minute i have internet access....but after 2 to 3 minutes it says that my connection has been terminated....after 2-3 min after it comes back again.....i called smartbro but their technical support SUCKS!!!!!!!!!!!! can someone please help me.....i can't download anything  :cry:   

Link to comment
Share on other sites

i also found something that might confuse or interest you or.....you already know about this.....i have the 192.168.xxx.xxx ip type and i still can't find or access my canopy....i tried everything except climbing my 20ft high canopy but to no avail........but after checking it with some ip detector websites it says that i have  an ip of 125.60.xxx.xxx  weird right....as if their masking it.....i asked smart about this but they told me its confidential?? they suck really....any ideas???

Link to comment
Share on other sites

guys! im new hir. i need help. how will i make my canopy works? because we change address i ask for smart to change our address but they say it will take 3-7 days for them to re install my canopy. i cant wait that long so i try to make it work. but im unlucky. can someone give me step by step procedure on the things i have to configure in my canopy to make it work.. thanks in advance.. by the way i can access my canopy but i cant connect to the net. thanks again to those who will reply.. :angel:

Link to comment
Share on other sites

i also found something that might confuse or interest you or.....you already know about this.....i have the 192.168.xxx.xxx ip type and i still can't find or access my canopy....i tried everything except climbing my 20ft high canopy but to no avail........but after checking it with some ip detector websites it says that i have  an ip of 125.60.xxx.xxx  weird right....as if their masking it.....i asked smart about this but they told me its confidential?? they suck really....any ideas???

it's not with the ultra surf.. it's with your internet connection.. if after you removed ultra surf and still you can't browse then probably it's with the way how your connection is setup and not with ultrasurf.

guys! im new hir. i need help. how will i make my canopy works? because we change address i ask for smart to change our address but they say it will take 3-7 days for them to re install my canopy. i cant wait that long so i try to make it work. but im unlucky. can someone give me step by step procedure on the things i have to configure in my canopy to make it work.. thanks in advance.. by the way i can access my canopy but i cant connect to the net. thanks again to those who will reply.. :angel:

don't wait.. hehe. get the canopy.. put it on the rooftop of your new address. point it to any smart cellsite near your place.. access the canopy, configure the color code... and your all set.. you'll just have to call smartbro and have your connection reactivated.. :)

Link to comment
Share on other sites

  • 3 weeks later...

Greetings sirs! =D

I am a newbie here and I am really curious about tweaking my internet connection.

This is my first post. :D

Sirs, Is there any tweak for it to go up beyond 384kbps++?

I did some changes but it seems it's still the same.

I wanted it somehow to reach 512kbps or more if that's possible

Also, sometimes, I am experience request timed outs too during daytime 12nn-4pm..

My current speed:

share2-JYBRL0ZFK&dual=yes&q2=R4DZAE3SK

My module stats:

RSSI : 954

Power Level : -59 dBm

Jitter : 3

Air Delay : 69 approximately 0.64 miles (3381 feet)

My adjustments in the QoS of the canopy radio:

MIR Bandwidth Settings:

SUDR: 300

SDDR: 700

UBA: 1500

DBA: 1500

CIR Bandwidth Settings:

LPUC: 100

LPDC: 100

Hi-Priority Channel: Enabled

HPUC: 100

HPCD: 100

*Using cablenut. Uninstalled cFosSpeed.. *

Cablenut Settings: (used sir coolbuster's given css)

Anti-virus: NOD32

Is there anyway to somehow increase, improve, reduce rtos' or eliminate rtos' it without consulting smartbro's tech support?

Link to comment
Share on other sites

need help coolbuster! ive try to tweak my canopy set-up at Motorola canopy site but i still get low speed result, i have adjust the proirity from disable to anable and still not working on my smart bro? really need help thank you very much. :cry: :cry: :cry:

here is the detail:

Smart bro: 386kbps

os: win XP

Link to comment
Share on other sites

need help coolbuster! ive try to tweak my canopy set-up at Motorola canopy site but i still get low speed result, i have adjust the proirity from disable to anable and still not working on my smart bro? really need help thank you very much. :cry: :cry: :cry:

here is the detail:

Smart bro: 386Kbps

os: win XP

tweaking something on the canopy page won't actually do anything significant.. you can try but you can't be assured.

try to do the coolbusters tweak.. and if that thing doesn't help. then suspect that its actually with your reception.. it could be noisy...

Link to comment
Share on other sites

Hi guys :) ma first post here.... haven't tweak this yet.

hopin' i could improve it in here :)

:::.. testmy.net test results ..:::

Download Connection is:: 361 Kbps about 0.36 Mbps (tested with 512 kB)

Download Speed is:: 44 kB/s

Upload Connection is:: 353 Kbps about 0.4 Mbps (tested with 579 kB)

Upload Speed is:: 43 kB/s

Tested From:: https://testmy.net (Main)

Test Time:: 2008/10/09 - 12:51pm

D-Validation Link:: https://testmy.net/stats/id-BGPYA2RKV

U-Validation Link:: https://testmy.net/stats/id-K3TV8CGF2

User Agent:: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; InfoPath.2) [!]

Link to comment
Share on other sites

And.... my 2nd post :).....

Your connection is: 366 Kbps or 0.4 Mbps

You downloaded at: 45 kB/s

You are running: 6 times faster than 56K and can download 1 megabyte in 22.76 second(s)

Member Ident:Username:burning-ice CompID:11146346343

Test Time:: 2008/10/09 - 1:34pm

Test Browser and OS info: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; InfoPath.2)

Test ID: 7J2NSOZAK (if this is a screenshot go to testmy.net to see if this is fake)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...