Jump to content

Recommended Posts

Hi guys im new here but have been following quite a few topics on tweaking speeds...well im actually frustrated on my speed considering ive done evrything like scanning the com 4 spyware and virus,dl cablenut 4.08 and just bout evry solution posted by Van Buren,and im still confused on many stuff regarding which i ll go thru later,sum1 pls help me..thks :D

:::.. Download Stats ..:::

Connection is:: 116 Kbps about 0.1 Mbps (tested with 386 KB)

Download Speed is:: 14 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 2 times faster than 56K you can download 1MB in 73.14 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=O3TB4HYZ9

Well the thing is most of the time im gettin in between 100 -200 kbps,and ive touch the 500 mark just twice  :(  ive register for a 10mb package...ive even try tcp/ip optimizer but still doesnt help anything...

Link to post
Share on other sites

hey z3phyr and welcome to the forum :)

follow these steps and post again

1. What OS are you running, ex win 98, win xp SP1, SP2

2. What service do you have, what is the advertised speed for download/upload.

3. What tweakprograms you already got installed, and run this test http://www.dslreports.com/tweaks  copy and paste result URL  adress in your post!

5. What speed do you have against www.testmy.net and http://nitro.ucsc.edu/  also make a tracert, go to start-run type command and hit enter, type tracert testmy.net and hit enter, right click copy all and paste it in your post.

VanBuren :)

Link to post
Share on other sites

Well im currently running WIndows XP SP2,hmm well im kinda confused by the second question :D im sorry if i bother askin u but im kinda new... :D Im currently usin cablenut 4.08 b4 tht was tcp/ip optimizer from speedguide..oso usin wireless broadband..

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 71.02Kb/s

running 10s inbound test (server to client) . . . . . . 22.83kb/s

------  Client System Details  ------

OS data: Name = Windows NT, Architecture = x86, Version = 5.1

Java data: Vendor = Microsoft Corp., Version = 1.1.4

------  Web100 Detailed Analysis  ------

Link detection algorithm failed due to excessive Round Trip Times.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 965.23 msec; the Packet size = 1460 Bytes; and

There were 1 packets retransmitted, 1 duplicate acks received, and 2 SACK blocks received

The connection stalled 1 times due to packet loss

The connection was idle 1.86 seconds (18.6%) of the time

This connection is sender limited 35.57% of the time.

  Increasing the current send buffer (101.0 KB) will improve performance

This connection is network limited 64.42% of the time.

  Contact your local network administrator to report a network problem

Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch

    Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Information: Network Middlebox is modifying MSS variable

Server IP addresses are preserved End-to-End

Client IP address not found.  For IE users, modify the Java parameters

click Tools - Internet Options - Security - Custom Level, scroll down to

Microsoft VM - Java permissions and click Custom, click Java Custom Settings

Edit Permissions - Access to all Network Addresses, click Enable and save changes

Tracing route to testmy.net [67.19.36.6]

over a maximum of 30 hops:

  1  120 ms  129 ms  119 ms  211.24.254.129

  2  125 ms  169 ms  139 ms  211.24.248.69

  3    *      271 ms  140 ms  fe-0-1-1.GLSFB-MBONE-001.time.net.my [203.121.20

.1]

  4  535 ms  139 ms  139 ms  211.24.210.1

  5  169 ms  149 ms  149 ms  203.121.17.6

  6  117 ms  129 ms  149 ms  Fe1-1-0.gw01.glsfb.time.net.my [203.121.16.30]

  7  168 ms  129 ms  139 ms  Fe1-1-0.gw01.glsfb.time.net.my [203.121.16.30]

  8    *      152 ms  169 ms  210.0.250.21

  9    *        *        *    Request timed out.

10  353 ms  449 ms  419 ms  pos5-0.cr02.dal01.pccwbtn.net [63.218.22.66]

11  358 ms  379 ms    *    eq-dallas-1000M.theplanet.com [206.223.118.3]

12  419 ms  379 ms    *    dist-vlan31.dsr3-1.dllstx3.theplanet.com [70.85.

127.29]

13  389 ms  439 ms    *    dist-vlan21.dsr1-1.dllstx2.theplanet.com [70.85.

127.67]

14  328 ms  390 ms  429 ms  dsr2-1-v2.dllstx4.theplanet.com [12.96.160.39]

15    *      331 ms  349 ms  gig1-0-2.tp-car9-2.dllstx4.theplanet.com [67.18.

116.86]

16    *        *    1044 ms  6.67-19-36.reverse.theplanet.com [67.19.36.6]

Trace complete.

Im not 2 sure bout results i get bcos i dun understand a single thing... :D pls help...

Link to post
Share on other sites

2. What service do you have, what is the advertised speed for download/upload.

what i mean is

do you have DSL or Cable?

How fast does your Internet Service Provider say you have ( what speed do you pay for ) ?

you have a 120 ms ping to your gateway

unplug power to modem and router for 30 seconds, then plug in power again

now do a new treace route and post result

also run this test  http://www.dslreports.com/tweaks  when you get result, copy URL adress and paste it here so we can see it

VanBuren :)

Link to post
Share on other sites

.s1 is right,  your wireless network could be the slow point.  If you can you should hook your system up directly,  get your tweaks done and find out what your best tested speeds are.  After that start working with your wireless side to see how much it slows down.

Are you wireless b or g?  What router or access point do  you have?  Wireless networks rated speed is NEVER close to the actual speed and it can get reall slow over distances.  If your running B  and your covering any distance or have lots of interference you might be lucky to get 1-2Mps from it.  If you let us know what router you have I might be able to find something on what you should expect.

Lantom

Link to post
Share on other sites
:(  Well im really confused by all this stuff........anywayz my advertise speed is 10MB,router....well i dont think i have a router because mine is just basically connected 2 the com and can be used right away....no other connections needed..Im not usin a repeater either,mine should be a DSL too.. and when i try the tweak tester it always says fail to download or the server mayb busy..but ive try plenty of times :(
Link to post
Share on other sites

Well here it is..

TCP options string = 020405b40103030101010402

MTU = 1500

MTU is fully optimized for broadband.

MSS = 1460

Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 1460

RWIN Scaling (RFC1323) = 1 bits (scale factor of 2)

Unscaled Receive Window = 730

RWIN is a multiple of MSS

Other values for RWIN that might work well with your current MTU/MSS:

513920 (MSS x 44 * scale factor of 8)

256960 (MSS x 44 * scale factor of 4)

128480 (MSS x 44 * scale factor of 2)

64240 (MSS x 44) 

bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 58.4 kbps (7.3 KBytes/s) @ 200ms

Your RcvWindow limits you to: 23.36 kbps (2.92 KBytes/s) @ 500ms

Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 118 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000

Link to post
Share on other sites

Well suprisingly it went up :?

:::.. Download Stats ..:::

Connection is:: 400 Kbps about 0.4 Mbps (tested with 386 KB)

Download Speed is:: 49 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 7 times faster than 56K you can download 1MB in 20.9 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=8KCG97LWB

BOut the analyzer it always shows the samething and the ip add is diff from mine,but when i check for any proxys,its always untick....so basically theres no proxys..

Link to post
Share on other sites

Well suprisingly it went up :?

:::.. Download Stats ..:::

Connection is:: 400 Kbps about 0.4 Mbps (tested with 386 KB)

Download Speed is:: 49 KB/s

Tested From:: http://www.testmy.net/

Bottom Line:: 7 times faster than 56K you can download 1MB in 20.9 second(s)

Validation Link:: https://testmy.net/cgi-bin/get.cgi?Test_ID=8KCG97LWB

BOut the analyzer it always shows the samething and the ip add is diff from mine,but when i check for any proxys,its always untick....so basically theres no proxys..

Well that indicates you connecting via another server, and your speed will be limited by the settings that server has

i would leave my settings as default, as you have them now

also call your ISP and ask if this is the speed they provide to you

VanBuren :)

Link to post
Share on other sites

Well evyrthing when well,the speed is consisten now and pretty high....but not sure bout 2morrow..anywayz just wanna say a big thks to Van Buren and to those who helped...i appreciate it u guys ;) and Van u have utmostly patience ive ever seen helping evry1 around..kudos!!if i need help i ll be back  ;)

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...