ArcticWolf Posted January 26, 2005 CID Share Posted January 26, 2005 Did a test at http://nitro.ucsc.edu/ and i have alot of re-transmitted packets and a bunch of duplicate acks WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 773.32Kb/s running 10s inbound test (server to client) . . . . . . 4.57Mb/s ------ Client System Details ------ OS data: Name = Windows 98, Architecture = x86, Version = 4.10 Java data: Vendor = Microsoft Corp., Version = 1.1.4 ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Half Duplex mode Information: throughput is limited by other network traffic. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 132.39 msec; the Packet size = 1460 Bytes; and There were 44 packets retransmitted, 465 duplicate acks received, and 226 SACK blocks received The connection was idle 0 seconds (0%) of the time This connection is network limited 99.95% of the time. Contact your local network administrator to report a network problem Contact your local network admin and report excessive packet reordering Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Client IP address not found. For IE users, modify the Java parameters click Tools - Internet Options - Security - Custom Level, scroll down to Microsoft VM - Java permissions and click Custom, click Java Custom Settings Edit Permissions - Access to all Network Addresses, click Enable and save changes WEB100 Kernel Variables: Client: localhost/127.0.0.1 AckPktsIn: 1968 AckPktsOut: 0 BytesRetrans: 64240 CongAvoid: 1269 CongestionOverCount: 0 CongestionSignals: 2 CountRTT: 1475 CurCwnd: 86140 CurMSS: 1460 CurRTO: 370 CurRwinRcvd: 513920 CurRwinSent: 5840 CurSsthresh: 55480 DSACKDups: 0 DataBytesIn: 0 DataBytesOut: 5794740 DataPktsIn: 0 DataPktsOut: 3969 DupAcksIn: 465 ECNEnabled: 0 FastRetran: 2 MaxCwnd: 213160 MaxMSS: 1460 MaxRTO: 460 MaxRTT: 250 MaxRwinRcvd: 513920 MaxRwinSent: 5840 MaxSsthresh: 106580 MinMSS: 1460 MinRTO: 290 MinRTT: 90 MinRwinRcvd: 64240 MinRwinSent: 5840 NagleEnabled: 1 OtherReductions: 7 PktsIn: 1968 PktsOut: 3969 PktsRetrans: 44 X_Rcvbuf: 103424 SACKEnabled: 3 SACKsRcvd: 226 SendStall: 0 SlowStart: 205 SampleRTT: 140 SmoothedRTT: 140 X_Sndbuf: 103424 SndLimTimeRwin: 0 SndLimTimeCwnd: 10046708 SndLimTimeSender: 4024 SndLimTransRwin: 0 SndLimTransCwnd: 1 SndLimTransSender: 1 SndLimBytesRwin: 0 SndLimBytesCwnd: 5797660 SndLimBytesSender: 0 SubsequentTimeouts: 0 SumRTT: 195280 Timeouts: 0 TimestampsEnabled: 0 WinScaleRcvd: 3 WinScaleSent: 7 DupAcksOut: 0 StartTimeUsec: 706455 Duration: 10051370 c2sData: 2 c2sAck: 2 s2cData: 9 s2cAck: 3 Checking for mismatch condition (cwndtime > .3) [0.99>.3], (MaxSsthresh > 0) [106580>0], (PktsRetrans/sec > 2) [4.4>2], (estimate > 2) [3.74>2] Checking for mismatch on uplink (speed > 50 [4.61>50], (xmitspeed < 5) [0.77<5] (rwintime > .9) [0>.9], (loss < .01) [5.03<.01] Checking for excessive errors condition (loss/sec > .15) [5.03>.15], (cwndtime > .6) [0.99>.6], (loss < .01) [5.03<.01], (MaxSsthresh > 0) [106580>0] Checking for 10 Mbps link (speed < 9.5) [4.61<9.5], (speed > 3.0) [4.61>3.0] (xmitspeed < 9.5) [0.77<9.5] (loss < .01) [5.03<.01], (link > 0) [0>0] Checking for Wireless link (sendtime = 0) [4.00=0], (speed < 5) [4.61<5] (Estimate > 50 [3.74>50], (Rwintime > 90) [0>.90] (RwinTrans/CwndTrans = 1) [0/1=1], (link > 0) [0>0] Checking for DSL/Cable Modem link (speed < 2) [4.61<2], (SndLimTransSender = 0) [1=0] (SendTime = 0) [4.003688487564886E-4=0], (link > 0) [0>0] Checking for half-duplex condition (rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30], (SenderTrans/sec > 30) [0.1>30], OR (link <= 10) [0<=10] Checking for congestion (cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0] (MaxSsthresh > 0) [106580>0] bw = 3.74 based on packet size = 11Kbits, RTT = 132.39msec, and loss = 5.039052658100278E-4 The theoretical network limit is 3.74 Mbps The transmit buffer (101.0 KByte) limits the application to 5.95 Mbps Your receive buffer (501.0 KByte) limits the application to 29.61 Mbps The network based flow control limits the application to 12.28 Mbps Client Data reports link is 'T1', Client Acks report link is 'T1' Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet' Quote Link to comment Share on other sites More sharing options...
VanBuren Posted January 26, 2005 CID Share Posted January 26, 2005 you have a very large RWIN, do you use TCP Optimizer? if so, change from Extream to Cable and click optimized values and save + reboot VanBuren Quote Link to comment Share on other sites More sharing options...
ArcticWolf Posted January 26, 2005 Author CID Share Posted January 26, 2005 not even Van , I downloaded a preset INF file from SpeedGuide.net This is what is written in the file ; ___________________________________ ; / ; | Copyright SpeedGuide.net 1999-2000. | ; | https://www.speedguide.net '>https://www.speedguide.net | ; | [email protected] | ; ___________________________________/ ; ; ; Use at your own risk. ; ; This file is intended for use with Windows 98/98SE and Windows ME ! Check our site ; at https://www.speedguide.net for tweaking other operating systems, information ; on advanced Regisry editting and all your broadband needs. ; ; ; To install this patch, simply highlight this .inf file, right-click and choose ; "install" from the pull-down menu. ; ; It is always a good idea to backup your Registry before making changes. ; ---------------------------------------------------------------------------------- ; ; This generic patch adds the optimum TCP/IP Registry values for high speed/high latency ; Internet connections, such as Cable Modems, DSL and similar broadband technologies, ; The file also fixes a bug in ICS (Internet Connection Sharing in Windows 98SE) ; that sets a small MTU value. ; ; Keep in mind that the patch adds extra settings to ensure compatability with different ; systems and setups. It's always best to manually add the necessary entries for your ; connection. ; ; You need to reboot for changes to take effect. ; ; ----------------------------------------------------------------------------------- [Version] signature=$CHICAGO$ [DefaultInstall] DelReg=Delete_Old_Tweaks AddReg=Add_SpeedGuide_Tweaks [Delete_Old_Tweaks] HKLM,SystemCurrentControlSetServicesVxDMSTCP,DefaultRcvWindow HKLM,SystemCurrentControlSetServicesVxDMSTCP,DefaultTTL HKLM,SystemCurrentControlSetServicesVxDMSTCP,PMTUDiscovery HKLM,SystemCurrentControlSetServicesVxDMSTCP,PMTUBlackHoleDetect HKLM,SystemCurrentControlSetServicesVxDMSTCPParameters,Tcp1323Opts HKLM,SystemCurrentControlSetServicesVxDMSTCP,Tcp1323Opts HKLM,SystemCurrentControlSetServicesVxDMSTCPParameters,SackOpts HKLM,SystemCurrentControlSetServicesVxDMSTCP,SackOpts HKLM,SystemCurrentControlSetServicesVxDMSTCPParameters,MaxDupAcks HKLM,SystemCurrentControlSetServicesClassNetTrans0000,MaxMTU HKLM,SystemCurrentControlSetServicesClassNetTrans0001,MaxMTU HKLM,SystemCurrentControlSetServicesClassNetTrans0002,MaxMTU HKLM,SystemCurrentControlSetServicesClassNetTrans0003,MaxMTU HKLM,SystemCurrentControlSetServicesClassNetTrans0004,MaxMTU HKLM,SystemCurrentControlSetServicesClassNetTrans0005,MaxMTU HKLM,SystemCurrentControlSetServicesClassNetTrans0006,MaxMTU HKLM,SystemCurrentControlSetServicesClassNetTrans0007,MaxMTU HKLM,SystemCurrentControlSetServicesClassNetTrans0008,MaxMTU HKLM,SystemCurrentControlSetServicesClassNetTrans0009,MaxMTU HKLM,SystemCurrentControlSetServicesICSharingSettingsGeneral,InternetMTU [Add_SpeedGuide_Tweaks] HKLM,SystemCurrentControlSetServicesVxDMSTCP,DefaultRcvWindow,0,"256960" HKLM,SystemCurrentControlSetServicesVxDMSTCP,DefaultTTL,0,"64" HKLM,SystemCurrentControlSetServicesVxDMSTCP,PMTUDiscovery,0,"1" HKLM,SystemCurrentControlSetServicesVxDMSTCP,PMTUBlackHoleDetect,0,"0" HKLM,SystemCurrentControlSetServicesVxDMSTCP,Tcp1323Opts,0,"1" HKLM,SystemCurrentControlSetServicesVxDMSTCP,SackOpts,0,"1" HKLM,SystemCurrentControlSetServicesVxDMSTCPParameters,MaxDupAcks,0x10001,"3" HKLM,SystemCurrentControlSetServicesClassNetTrans0000,MaxMTU,0,"1500" HKLM,SystemCurrentControlSetServicesClassNetTrans0001,MaxMTU,0,"1500" HKLM,SystemCurrentControlSetServicesClassNetTrans0002,MaxMTU,0,"1500" HKLM,SystemCurrentControlSetServicesClassNetTrans0003,MaxMTU,0,"1500" HKLM,SystemCurrentControlSetServicesClassNetTrans0004,MaxMTU,0,"1500" HKLM,SystemCurrentControlSetServicesClassNetTrans0005,MaxMTU,0,"1500" HKLM,SystemCurrentControlSetServicesClassNetTrans0006,MaxMTU,0,"1500" HKLM,SystemCurrentControlSetServicesClassNetTrans0007,MaxMTU,0,"1500" HKLM,SystemCurrentControlSetServicesClassNetTrans0008,MaxMTU,0,"1500" HKLM,SystemCurrentControlSetServicesClassNetTrans0009,MaxMTU,0,"1500" Quote Link to comment Share on other sites More sharing options...
VanBuren Posted January 26, 2005 CID Share Posted January 26, 2005 that was odd, the analyzer says your RWIN is quote "CurRwinRcvd: 513920" and your settings are HKLM,SystemCurrentControlSetServicesVxDMSTCP,DefaultRcvWindow,0,"256960" after you applyed that tweak, have you used any tweakprogram? VanBuren Quote Link to comment Share on other sites More sharing options...
ArcticWolf Posted January 26, 2005 Author CID Share Posted January 26, 2005 Nope not a single tweak after that Quote Link to comment Share on other sites More sharing options...
VanBuren Posted January 26, 2005 CID Share Posted January 26, 2005 install cablenut, and open it, there you should be able to see what current settings you have https://testmy.net/forum/index.php?action=dlattach;topic=1013.0;id=64 make a screenshot, or tell me what you see VanBuren Quote Link to comment Share on other sites More sharing options...
ArcticWolf Posted January 26, 2005 Author CID Share Posted January 26, 2005 Hmmm I don't know how to insert a picture here, unless i have to upload it somewhere first and then insert a link But everything is blank except Enable DNS = 0 Lanabase = 0 LocalcopyMade = 1 Quote Link to comment Share on other sites More sharing options...
VanBuren Posted January 26, 2005 CID Share Posted January 26, 2005 uninstall that tweak from speedguide ( you can save it on your pc if you want to reinstall it ) reboot your pc download this attached file and unzip it to C:ProgramCablenut now open cablenut, in top left corner click file, click load custom settings file, browse to C:ProgramCablenut dubble click on 98 & ME Cable_DSL 3000+.ccs click save to registry and reboot your pc again that file has a RWIN of 256960 VanBuren Quote Link to comment Share on other sites More sharing options...
ArcticWolf Posted January 26, 2005 Author CID Share Posted January 26, 2005 Ok I have loaded that file and applied it to cablebut and did a re-rest WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 753.66Kb/s running 10s inbound test (server to client) . . . . . . 4.59Mb/s ------ Client System Details ------ OS data: Name = Windows 98, Architecture = x86, Version = 4.10 Java data: Vendor = Microsoft Corp., Version = 1.1.4 ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Half Duplex mode Information: throughput is limited by other network traffic. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 181.90 msec; the Packet size = 1460 Bytes; and There were 38 packets retransmitted, 362 duplicate acks received, and 140 SACK blocks received The connection was idle 0 seconds (0%) of the time This connection is network limited 99.95% of the time. Contact your local network administrator to report a network problem Contact your local network admin and report excessive packet reordering Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Client IP address not found. For IE users, modify the Java parameters click Tools - Internet Options - Security - Custom Level, scroll down to Microsoft VM - Java permissions and click Custom, click Java Custom Settings Edit Permissions - Access to all Network Addresses, click Enable and save changes WEB100 Kernel Variables: Client: localhost/127.0.0.1 AckPktsIn: 1973 AckPktsOut: 0 BytesRetrans: 55480 CongAvoid: 1412 CongestionOverCount: 0 CongestionSignals: 1 CountRTT: 1591 CurCwnd: 127020 CurMSS: 1460 CurRTO: 430 CurRwinRcvd: 256960 CurRwinSent: 5840 CurSsthresh: 100740 DSACKDups: 0 DataBytesIn: 0 DataBytesOut: 5901320 DataPktsIn: 0 DataPktsOut: 4042 DupAcksIn: 362 ECNEnabled: 0 FastRetran: 1 MaxCwnd: 202940 MaxMSS: 1460 MaxRTO: 450 MaxRTT: 240 MaxRwinRcvd: 256960 MaxRwinSent: 5840 MaxSsthresh: 100740 MinMSS: 1460 MinRTO: 300 MinRTT: 90 MinRwinRcvd: 64240 MinRwinSent: 5840 NagleEnabled: 1 OtherReductions: 1 PktsIn: 1974 PktsOut: 4045 PktsRetrans: 38 X_Rcvbuf: 103424 SACKEnabled: 3 SACKsRcvd: 140 SendStall: 0 SlowStart: 179 SampleRTT: 210 SmoothedRTT: 210 X_Sndbuf: 103424 SndLimTimeRwin: 0 SndLimTimeCwnd: 10058857 SndLimTimeSender: 4039 SndLimTransRwin: 0 SndLimTransCwnd: 1 SndLimTransSender: 1 SndLimBytesRwin: 0 SndLimBytesCwnd: 5905700 SndLimBytesSender: 0 SubsequentTimeouts: 0 SumRTT: 289410 Timeouts: 0 TimestampsEnabled: 0 WinScaleRcvd: 2 WinScaleSent: 7 DupAcksOut: 0 StartTimeUsec: 154677 Duration: 10064035 c2sData: 2 c2sAck: 2 s2cData: 9 s2cAck: 3 Checking for mismatch condition (cwndtime > .3) [0.99>.3], (MaxSsthresh > 0) [100740>0], (PktsRetrans/sec > 2) [3.8>2], (estimate > 2) [3.89>2] Checking for mismatch on uplink (speed > 50 [4.69>50], (xmitspeed < 5) [0.75<5] (rwintime > .9) [0>.9], (loss < .01) [2.47<.01] Checking for excessive errors condition (loss/sec > .15) [2.47>.15], (cwndtime > .6) [0.99>.6], (loss < .01) [2.47<.01], (MaxSsthresh > 0) [100740>0] Checking for 10 Mbps link (speed < 9.5) [4.69<9.5], (speed > 3.0) [4.69>3.0] (xmitspeed < 9.5) [0.75<9.5] (loss < .01) [2.47<.01], (link > 0) [0>0] Checking for Wireless link (sendtime = 0) [4.01=0], (speed < 5) [4.69<5] (Estimate > 50 [3.89>50], (Rwintime > 90) [0>.90] (RwinTrans/CwndTrans = 1) [0/1=1], (link > 0) [0>0] Checking for DSL/Cable Modem link (speed < 2) [4.69<2], (SndLimTransSender = 0) [1=0] (SendTime = 0) [4.013755086011025E-4=0], (link > 0) [0>0] Checking for half-duplex condition (rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30], (SenderTrans/sec > 30) [0.1>30], OR (link <= 10) [0<=10] Checking for congestion (cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0] (MaxSsthresh > 0) [100740>0] bw = 3.89 based on packet size = 11Kbits, RTT = 181.90msec, and loss = 2.4721878862793575E-4 The theoretical network limit is 3.89 Mbps The transmit buffer (101.0 KByte) limits the application to 4.33 Mbps Your receive buffer (250.0 KByte) limits the application to 10.77 Mbps The network based flow control limits the application to 8.51 Mbps Client Data reports link is 'T1', Client Acks report link is 'T1' Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet' Quote Link to comment Share on other sites More sharing options...
VanBuren Posted January 26, 2005 CID Share Posted January 26, 2005 its getting better, only 38 packets re trnsmitted compared to "There were 44 packets retransmitted" before try this file aswell, i changed the RWIN to 128480 VanBuren Quote Link to comment Share on other sites More sharing options...
ArcticWolf Posted January 26, 2005 Author CID Share Posted January 26, 2005 Well Well Well,lol .... seems like there is no more re-transmirs . just wish i could hit my 5.1meg download rate, but I guess there is nothing that can be done cause of Win98se WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 772.15Kb/s running 10s inbound test (server to client) . . . . . . 4.61Mb/s ------ Client System Details ------ OS data: Name = Windows 98, Architecture = x86, Version = 4.10 Java data: Vendor = Microsoft Corp., Version = 1.1.4 ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Full Duplex mode No network congestion discovered. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 204.09 msec; the Packet size = 1460 Bytes; and No packet loss - but packets arrived out-of-order 16.17% of the time This connection is receiver limited 87.84% of the time. Increasing the current receive buffer (125.0 KB) will improve performance This connection is network limited 12.11% of the time. Contact your local network admin and report excessive packet reordering Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Client IP address not found. For IE users, modify the Java parameters click Tools - Internet Options - Security - Custom Level, scroll down to Microsoft VM - Java permissions and click Custom, click Java Custom Settings Edit Permissions - Access to all Network Addresses, click Enable and save changes WEB100 Kernel Variables: Client: localhost/127.0.0.1 AckPktsIn: 1916 AckPktsOut: 0 BytesRetrans: 0 CongAvoid: 0 CongestionOverCount: 0 CongestionSignals: 0 CountRTT: 1606 CurCwnd: 129940 CurMSS: 1460 CurRTO: 430 CurRwinRcvd: 128480 CurRwinSent: 5840 CurSsthresh: 2147483647 DSACKDups: 0 DataBytesIn: 0 DataBytesOut: 5851680 DataPktsIn: 0 DataPktsOut: 4008 DupAcksIn: 310 ECNEnabled: 0 FastRetran: 0 MaxCwnd: 129940 MaxMSS: 1460 MaxRTO: 440 MaxRTT: 240 MaxRwinRcvd: 128480 MaxRwinSent: 5840 MaxSsthresh: 0 MinMSS: 1460 MinRTO: 300 MinRTT: 90 MinRwinRcvd: 64240 MinRwinSent: 5840 NagleEnabled: 1 OtherReductions: 0 PktsIn: 1916 PktsOut: 4008 PktsRetrans: 0 X_Rcvbuf: 103424 SACKEnabled: 3 SACKsRcvd: 0 SendStall: 0 SlowStart: 87 SampleRTT: 210 SmoothedRTT: 210 X_Sndbuf: 103424 SndLimTimeRwin: 8819040 SndLimTimeCwnd: 1215759 SndLimTimeSender: 4073 SndLimTransRwin: 1 SndLimTransCwnd: 1 SndLimTransSender: 1 SndLimBytesRwin: 5429740 SndLimBytesCwnd: 421940 SndLimBytesSender: 0 SubsequentTimeouts: 0 SumRTT: 327780 Timeouts: 0 TimestampsEnabled: 0 WinScaleRcvd: 1 WinScaleSent: 7 DupAcksOut: 0 StartTimeUsec: 302076 Duration: 10043029 c2sData: 2 c2sAck: 2 s2cData: 9 s2cAck: 3 Checking for mismatch condition (cwndtime > .3) [0.12>.3], (MaxSsthresh > 0) [0>0], (PktsRetrans/sec > 2) [0>2], (estimate > 2) [54.57>2] Checking for mismatch on uplink (speed > 50 [4.66>50], (xmitspeed < 5) [0.77<5] (rwintime > .9) [0.87>.9], (loss < .01) [1.0E<.01] Checking for excessive errors condition (loss/sec > .15) [1.0E>.15], (cwndtime > .6) [0.12>.6], (loss < .01) [1.0E<.01], (MaxSsthresh > 0) [0>0] Checking for 10 Mbps link (speed < 9.5) [4.66<9.5], (speed > 3.0) [4.66>3.0] (xmitspeed < 9.5) [0.77<9.5] (loss < .01) [1.0E<.01], (link > 0) [100>0] Checking for Wireless link (sendtime = 0) [4.05=0], (speed < 5) [4.66<5] (Estimate > 50 [54.57>50], (Rwintime > 90) [0.87>.90] (RwinTrans/CwndTrans = 1) [1/1=1], (link > 0) [100>0] Checking for DSL/Cable Modem link (speed < 2) [4.66<2], (SndLimTransSender = 0) [1=0] (SendTime = 0) [4.057228740440161E-4=0], (link > 0) [100>0] Checking for half-duplex condition (rwintime > .95) [0.87>.95], (RwinTrans/sec > 30) [0.1>30], (SenderTrans/sec > 30) [0.1>30], OR (link <= 10) [100<=10] Checking for congestion (cwndtime > .02) [0.12>.02], (mismatch = 0) [0=0] (MaxSsthresh > 0) [0>0] bw = 54.57 based on packet size = 11Kbits, RTT = 204.09msec, and loss = 1.0E-6 The theoretical network limit is 54.57 Mbps The transmit buffer (101.0 KByte) limits the application to 3.86 Mbps Your receive buffer (125.0 KByte) limits the application to 4.80 Mbps The network based flow control limits the application to 4.85 Mbps Client Data reports link is 'T1', Client Acks report link is 'T1' Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet' Quote Link to comment Share on other sites More sharing options...
ArcticWolf Posted January 26, 2005 Author CID Share Posted January 26, 2005 I don't know about the packets that are out of order, or if it reflects on results and such. But I would like to say thank you Van, and if there is anything else that can be done to tweak it better let me know. Quote Link to comment Share on other sites More sharing options...
VanBuren Posted January 26, 2005 CID Share Posted January 26, 2005 no problem i think its looking good now, i think packets out of order is out of our control and no big deal, since you got the speed happy surfing VanBuren Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.