Jump to content

Canopy Screwing Up!


castoy

Recommended Posts

  • Replies 143
  • Created
  • Last Reply

Top Posters In This Topic

ohh so it is ok to have that lan status? because before when my lan status is 100Mbps, my connection speed never drops from 400Kbps. but when it was changed (i dont know how but i remembered using that QuickFix thingy) my speed never reached even 100 Kbps. anyway thanks to all your suggestions and efforts jun101ph and coolbuster2007  :grin:

Link to comment
Share on other sites

that is absolutely correct.

SmartBro can't give us even 1 mbps unless we enrol to a higher plan.

On the other hand, what I suspect with the sudden drop of your speed is that there might have been a remote re-configuration of your canopy settings. but i could be wrong.

well, 1st thing's first. try what jun101ph suggested.

Link to comment
Share on other sites

I have posted that topic before.

First you are going to do is to have the MAC address of the Canopy.

For example the mac address is 00:0C:F1:83:23:C7,

next is to convert the last 3 hex numbers to decimal,

83 ----> 131

23 ----> 35

C7-----> 199

then the IP address of the canopy is 10.131.35.199

. The 10 is added as the first number in the IP.

To access the canopy,

set TCP/IP to  the Obtain IP address and type 10.131.35.199 for the IP address and Submask: 255.0.0.0 ,

Then access http://10.131.35.199 to the browser.

Link to comment
Share on other sites

this is what ive done to restore my connection:

1. uninstall that quickfix 2.0 crap

2. manually set my IP to 169.254.1.2 then subnet mask to 255.255.0.0

3. now that i can access the canopy again, i checked (general tab)both the 100 full and half duplex link speeds, enabled 2X rate, and changed the network accessibility(IP tab) to local. This can all be found on the configurations page.

4. save changes then reboot.

well im no expert i just based the settings on screenshots of canopy settings.

can someone here post their canopy settings?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...