Jump to content
j_j

Qwest

Recommended Posts

:::.. Download Stats ..:::

Connection is:: 1267 Kbps about 1.3 Mbps (tested with 1496 KB)

Download Speed is:: 155 KB/s

Tested From:: http://www.testmy.net/

Test Time:: Sun Jan 30 08:34:43 PST 2005

Bottom Line:: 23X faster than 56K 1MB download in 6.61 sec

Validation Link:: https://testmy.net/id-31T04NRBZ

is this pretty good for qwest dsl. 1.5/128

Share this post


Link to post
Share on other sites

qwest has the 256/256 and the 1.5/896 services. But they use interleaving. Not good for gaming.

Just want to explain interleaving for those who don't know.

Quote from dslreports.com  :: written by Justin

ADSL modems commonly employ data Interleaving, which is a technique to increase resistance to noise bursts on a line. Interleaving "smears" out micro bits of data (interleaves them over time) so that a short burst of signal destroying noise can only remove part of any given larger block. Data blocks reserve some space for error-correction data.. which can salvage a partially damaged block. Interleaving increases the chance that noise on the line will only cause partial damage, not complete loss. Thats the good news.

The down-side of Interleaving is that it increases latency! this is because your little (say) quake movement packet is smeared out over several packets before it can be fully sent or fully received.

ADSL modems with typical Interleaving defaults can be 10-30ms behind in latency over equivalent speed SDSL modems... this means latency to any point for some ADSL modems can be at best 50ms! On the same setup, the aforementioned SDSL modems that typically add only 10ms. So for use of a nearby server, ADSL Interleaving can be the biggest single source of latency that you have.

Unfortunately, there is little clear information supplied with, or available on-line, about what latency a given DSL modem or ISP connection has built-in.

Some ADSL modems allow the user to turn off Interleaving, or turn it down to a narrow range, at the expense of possible data-loss on noisy lines. The Cisco 675, for example, has a full operating system inside it, and one of the attributes of the ether interface is Interleaving. See Randy Lutton's US West page). Some ISPs may be delivering this unit with Interleaving on, and some off. In other cases, it is the DSLAM (central office equipment) that has the Interleaving set, and this cannot be changed.

Share this post


Link to post
Share on other sites

This what I get with Qwest. :headbang:

:::.. Download Stats ..:::

Connection is:: 5320 Kbps about 5.3 Mbps (tested with 2992 kB)

Download Speed is:: 649 kB/s

Tested From:: https://testmy.net/ (main)

Test Time:: Wed May 25 19:15:10 CDT 2005

Bottom Line:: 95X faster than 56K 1MB download in 1.58 sec

Diagnosis: Awesome! 20% + : 293.78 % faster than the average for host (qwest.net)

Validation Link:: https://testmy.net/stats/id-C6Z7IOXDK

Share this post


Link to post
Share on other sites

::8000ft out with 1 bridge tap

:.. Download Stats ..:::

Connection is:: 5064 Kbps about 5.1 Mbps (tested with 2992 kB)

Download Speed is:: 618 kB/s

Tested From:: https://testmy.net/ (server1)

Test Time:: Tue Jun 21 22:57:13 MDT 2005

Bottom Line:: 90X faster than 56K 1MB download in 1.66 sec

Diagnosis: Awesome! 20% + : 227.34 % faster than the average for host (qwest.net)

Validation Link:: https://testmy.net/stats/id-06MEJPAGS

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...