Jump to content

20 Steps to Make SmartBro Faster


Recommended Posts

20 Steps To Make SmartBro Faster

1. Download Cablenut http://www.softpedia.com/get/Tweak/Network-Tweak/CableNut.shtml

2. Install CableNut, restart PC after installation.

3. Go to http://www.speedtest.net/

4. Note your download, upload & latency values in Kbps.

5. Go to http://www.j79zlr.com/cablenutXP2k.php,'>http://www.j79zlr.com/cablenutXP2k.php, don't forget to choose your connection carefully, then put your download, upload & latency values in the box provided.

6. Click "Compute Settings"

7. Click "CCS File Download", save the file to your desktop.

8. Go back to http://www.j79zlr.com/cablenutXP2k.php

9. Click TCP/IP Analyzer

10. Know your TCP Receive Window (RWIN) values, write down the values for "scale factor of 4" and "scale factor of 2".   

11. Now, download the latest version of CCleaner http://www.filehippo.com/download_ccleaner/

12. Install CCleaner, Analyze and Run Cleaner to eliminate all unwanted and junk files in your HD. 

13. Now open Command Prompt, type ipconfig /flushdns.

14. Exit Command Prompt.

15. Open the CableNut setting you saved on your desktop.

16. In the "DefaultReceiveWindow" box, change the current value to the value you wrote for "scale factor of 4"

17. In the "DefaultSendWindow" box, change the current value to the value you wrote for "scale factor of 2"

18. Important, see to it that the value for TCPMaxHalfOpen = 100, MaxConnectionsPer1_0Server = 10 and MaxConnectionsPerServer = 8 or 10

19. Click "Save to Registry", OK & Exit.

20. Restart PC

Your speed must be optimized now. Test your speed http://www.testmy.net/tools/test/d_load.php

This guide gave me almost twice the advertised smartbro speed!

Link to comment
Share on other sites

  • Replies 1k
  • Created
  • Last Reply

Top Posters In This Topic

hi im new here at the site i try to download cablenut but it says that the page cannot be display can you make download site so we can download all the files needed for our connection pls help us cause smart bro really suck! our internet connection

Teejay

Link to comment
Share on other sites

its the same with tcp/ip optimizer...nothings change...no improvement

the real problem here is the mother f.u.c.ker SMARTBROKEN, hope some1 will come up to tweak this pathetic SMARTBROKEN SHIT. SMARTBROKEN IS A CROOK WHO ROBS US OF OUR MONTHLY SUBSRIPTION :tickedoff: :tickedoff: :tickedoff::evil2::angry:

Link to comment
Share on other sites

I'd like to share to you my secret of getting satisfactory speed.

it's not cablenut. no of course, not even comodo & avast combi.

you know what it is?

PATIENCE.

i've been reformatting, tweaking and have shutdown my PC for a thousand times until i reaped off the fruit of my sacrifices...but i could not have done it without being persistent. take it from me. i got promoted to TMN Friend a while ago.  :haha:

Link to comment
Share on other sites

help sir.coolbuster2007 nothing change in my connection speed :cry2:

:::.. Download Stats ..:::

Download Connection is:: 43 Kbps about 0 Mbps (tested with 97 kB)

Download Speed is:: 5 kB/s

Tested From:: https://testmy.net/ (Main)

Test Time:: 2007/08/07 - 8:29pm

Bottom Line:: 1X faster than 56K 1MB Download in 204.8 sec

Tested from a 97 kB file and took 18.203 seconds to complete

Download Diagnosis:: May need help : running at only 14.78 % of your hosts average (197.210)

D-Validation Link:: https://testmy.net/stats/id-A2L075P8Q

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6 [!]

Link to comment
Share on other sites

yes i already did the tweaks....

win XP sp2

AVG anti-virus nka-on din ung firewall q.

programs:

Granado Espada,PS cs2,quickfix2,cablenut,chikka,rainlendar,mp3rocket(pero hndi na ka open)

location:panghulo malabon city

distance q sa cellsite: 23 METERS...nsa tapat lang talaga mismo ng hauz namin...sabi pa nga nung tech na nag kabit ng antenna q "sir jackpot kau ang bilis ng connection nyo ne2 panigurado swerte nyo katpat nyo ung cellsite!" bwiset un!

yan po sir

Link to comment
Share on other sites

Being right infront of the smart cellsite (smartbro base station) doesn't assure you of better speed. you might have a clear "visual line of sight". however, this does not mean that you have a clear "radio line of sight.

We need a "radio line of sight." Radio line of sight differs slightly from visual line of sight. Our signal can pass through various types of buildings and obstructions, (depending on your distance from a base station), so you may be able to get service even if you can't see the antenna.

Also there are other factors which affect speed. Viruses, trojans, excessive opening of programs while browsing the internet. So clean your PC before speed testing. Also, remember that its wireless internet which is susceptible to even the most basic device such as a phone, or a monitor that operates at 2.4GHz. The interference usually is not noticeable.

Link to comment
Share on other sites

Hello everyone, tm.n member for a long time but never posted. I had dial-up until December last year so I didn't post.

Location: Cagayan de Oro City.  Smart Base Station is about 1-1.5km away, atop a small hill.

My connection had been so-so the past few months, never could go beyond 300 Kbps  :buck2: Just now it's been this:

share2-8R6JHLS03

Good thing there's this forum here, I found there's more to tm.n than speed tests! I must commend the OP plus those others who have contributed to us subscribers making the most out of an otherwise inconsistent service.

Anyway, I'm off to try your 20-step tweak tonight, wish me luck everyone  :angel:

Had SmartBro installed

Link to comment
Share on other sites

a few minutes later.... did all the steps, speed is as below:

share2-CBLAYU2XK

I must note though that this problem is not isolated to my own base station, a friend who lives about 4kms away says his SmartBro is slower than usual too...

I had a bit of confusion however in your step 13 and 14.  Do it type ipconfig /flushdns in the run command (using winXP), or call up a DOS-style prompt and input the same command there?

I tried the latter, a message say "IPCONFIG is not a recognized..." thingy, sorry I wasn't able to note the full message down.  Also tried ipconfig /flushdns, it gave me the same message. 

So I tried the former, I typed ipconfig /flushdns on the run command. 

Hope my documentation can help you guys pinpoint what I overlooked, or it's just one of those Smart downtime days.... :buck2:

Link to comment
Share on other sites

@beldeti

go to start menu> run, in the window that comes out type cmd, then you will got to the command prompt. that's where you input those commands.

@luwi

just keep trying. look for other ways to tweak,specially if your using cablenut, try to search for other configuration. you could try gourame's. i'll attach it.

Link to comment
Share on other sites

@kupalnasmartbro

nice name. anyway, also browse this forum, specially http://www.testmy.net/t-18616.0. its worth the long search

here's what my hard work has earned me

:::.. Download Stats ..:::

Download Connection is:: 419 Kbps about 0.4 Mbps (tested with 1496 kB)

Download Speed is:: 51 kB/s

Tested From:: https://testmy.net/ (Main)

Test Time:: 2007/08/08 - 9:59am

Bottom Line:: 7X faster than 56K 1MB Download in 20.08 sec

Tested from a 1496 kB file and took 29.265 seconds to complete

Download Diagnosis:: 90% + Okay : running at 95.23 % of your hosts average (241.45)

D-Validation Link:: https://testmy.net/stats/id-P1EA67IRB

User Agent:: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6 [!]

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...