ROGMAN Posted February 2, 2005 CID Share Posted February 2, 2005 ok this is my 1st time posting hope this is the right place, i have windows xp home edition, sp 2, 2.4 mgh processor, gig of ram, 40 gb hard drive. my isp is fast freedom. advertised speed, 1.024 down with max burst rate 1.5.dont know about upload speed.fixed wireless broadband. dsl report tweek test 1. Your Tweakable Settings: Receive Window (RWIN): Quote Link to comment Share on other sites More sharing options...
VanBuren Posted February 2, 2005 CID Share Posted February 2, 2005 hey ROGMAN and welcome to the forum you running 91% of the burst cap of 1500 Kbps and thats very good you can try to tweak upload, by installing Cablenut https://testmy.net/forum/index.php?action=dlattach;topic=1013.0;id=64 open adjuster and change Default Send window to 128000 click save to registry and reboot good luck VanBuren Quote Link to comment Share on other sites More sharing options...
ROGMAN Posted February 2, 2005 Author CID Share Posted February 2, 2005 hey thanks for the quick response. i came across this site by accident, been reading the posts, ( always trying to learn something new). 1st comp i had was the Atari 6400, Quote Link to comment Share on other sites More sharing options...
monkhoous Posted February 3, 2005 CID Share Posted February 3, 2005 Calculated rwin using my special tool i get 192000 for your 1500Kbps and if you want to change mtu to 1492 as recommended in tweak test get raspppoe from www.raspppoe.com and follow the instruction for your OS I had speed improvement when I started using raspppoe so you should be to Good Luck! Quote Link to comment Share on other sites More sharing options...
ROGMAN Posted February 3, 2005 Author CID Share Posted February 3, 2005 Ok question, I connect thru pppoe, will this rasppoe interfear with that? Will they conflict, having 2 on 1 computer and isn't setting rwin at 192,000 a little high? Quote Link to comment Share on other sites More sharing options...
VanBuren Posted February 3, 2005 CID Share Posted February 3, 2005 http://www.dslreports.com/faq/2252 quote "Q: Raising MTU from 1480 with WinXP, using *built in* PPPoE connection software. (#2252) A: As of 10/15/01, there is no way known to raise MTU in WinXP from 1480. This issue is seen only by WinXP users who are connecting with the built in PPPoE connection software. If you change to RASPPPoE, or use a router instead, your MTU should then default to 1492. RASPPPoE is popular, free, and less problematic than WinPoet (another choice). This small difference (12 bytes) in MTU is negligible however, and should cause no concern. Check back from time to time though for a "fix"." I dont think you will gain any speed by increasing MTU to 1492, in this speed range. VanBuren Quote Link to comment Share on other sites More sharing options...
ROGMAN Posted February 3, 2005 Author CID Share Posted February 3, 2005 thanks. guess im doing ok. :)TCP/Web100 Network Diagnostic Tool v5.2.1e click START to begin Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 1.35Mb/s running 10s inbound test (server to client) . . . . . . 1.37Mb/s The slowest link in the end-to-end path is a 10 Mbps Ethernet subnet Information: Other network traffic is congesting the link click START to re-test Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 1.36Mb/s running 10s inbound test (server to client) . . . . . . 1.30Mb/s The slowest link in the end-to-end path is a 10 Mbps Ethernet subnet click START to re-test WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 1.36Mb/s running 10s inbound test (server to client) . . . . . . 1.30Mb/s ------ Client System Details ------ OS data: Name = Windows XP, Architecture = x86, Version = 5.1 Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06 ------ Web100 Detailed Analysis ------ 10 Mbps Ethernet link found. Link set to Half Duplex mode No network congestion discovered. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 240.58 msec; the Packet size = 1440 Bytes; and There were 38 packets retransmitted, 242 duplicate acks received, and 256 SACK blocks received The connection stalled 1 times due to packet loss The connection was idle 0.33 seconds (3.30%) of the time This connection is network limited 98.54% of the time. Contact your local network administrator to report a network problem Contact your local network admin and report excessive packet reordering Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Information: Network Middlebox is modifying MSS variable Server IP addresses are preserved End-to-End Client IP addresses are preserved End-to-End WEB100 Kernel Variables: Client: localhost/127.0.0.1 AckPktsIn: 706 AckPktsOut: 0 BytesRetrans: 54720 CongAvoid: 221 CongestionOverCount: 0 CongestionSignals: 6 CountRTT: 443 CurCwnd: 15840 CurMSS: 1440 CurRTO: 330 CurRwinRcvd: 192960 CurRwinSent: 5840 CurSsthresh: 12960 DSACKDups: 0 DataBytesIn: 0 DataBytesOut: 1692000 DataPktsIn: 0 DataPktsOut: 1175 DupAcksIn: 242 ECNEnabled: 0 FastRetran: 5 MaxCwnd: 194400 MaxMSS: 1440 MaxRTO: 900 MaxRTT: 750 MaxRwinRcvd: 192960 MaxRwinSent: 5840 MaxSsthresh: 96480 MinMSS: 1440 MinRTO: 290 MinRTT: 90 MinRwinRcvd: 48240 MinRwinSent: 5840 NagleEnabled: 1 OtherReductions: 0 PktsIn: 706 PktsOut: 1175 PktsRetrans: 38 X_Rcvbuf: 103424 SACKEnabled: 3 SACKsRcvd: 256 SendStall: 0 SlowStart: 220 SampleRTT: 110 SmoothedRTT: 100 X_Sndbuf: 103424 SndLimTimeRwin: 140323 SndLimTimeCwnd: 9883974 SndLimTimeSender: 5397 SndLimTransRwin: 1 SndLimTransCwnd: 2 SndLimTransSender: 1 SndLimBytesRwin: 17280 SndLimBytesCwnd: 1674720 SndLimBytesSender: 0 SubsequentTimeouts: 0 SumRTT: 106580 Timeouts: 1 TimestampsEnabled: 0 WinScaleRcvd: 2 WinScaleSent: 7 DupAcksOut: 0 StartTimeUsec: 481273 Duration: 10035055 c2sData: 3 c2sAck: 3 s2cData: 9 s2cAck: 2 Checking for mismatch condition (cwndtime > .3) [0.98>.3], (MaxSsthresh > 0) [96480>0], (PktsRetrans/sec > 2) [3.79>2], (estimate > 2) [0.63>2] Checking for mismatch on uplink (speed > 50 [1.34>50], (xmitspeed < 5) [1.36<5] (rwintime > .9) [0.01>.9], (loss < .01) [0.00<.01] Checking for excessive errors condition (loss/sec > .15) [5.10>.15], (cwndtime > .6) [0.98>.6], (loss < .01) [0.00<.01], (MaxSsthresh > 0) [96480>0] Checking for 10 Mbps link (speed < 9.5) [1.34<9.5], (speed > 3.0) [1.34>3.0] (xmitspeed < 9.5) [1.36<9.5] (loss < .01) [0.00<.01], (link > 0) [0>0] Checking for Wireless link (sendtime = 0) [5.38=0], (speed < 5) [1.34<5] (Estimate > 50 [0.63>50], (Rwintime > 90) [0.01>.90] (RwinTrans/CwndTrans = 1) [1/2=1], (link > 0) [0>0] Checking for DSL/Cable Modem link (speed < 2) [1.34<2], (SndLimTransSender = 0) [1=0] (SendTime = 0) [5.381021594477359E-4=0], (link > 0) [0>0] Checking for half-duplex condition (rwintime > .95) [0.01>.95], (RwinTrans/sec > 30) [0.10>30], (SenderTrans/sec > 30) [0.10>30], OR (link <= 10) [0<=10] Checking for congestion (cwndtime > .02) [0.98>.02], (mismatch = 0) [0=0] (MaxSsthresh > 0) [96480>0] bw = 0.63 based on packet size = 11Kbits, RTT = 240.58msec, and loss = 0.005106383003294468 The theoretical network limit is 0.63 Mbps The transmit buffer (101.0 KByte) limits the application to 3.27 Mbps Your receive buffer (188.0 KByte) limits the application to 6.11 Mbps The network based flow control limits the application to 6.16 Mbps Client Data reports link is 'Ethernet', Client Acks report link is 'Ethernet' Server Data reports link is '10 Gig', Server Acks report link is 'T1' As you can see i believe in being through. since i wasnt able to run this test yesterday. :::.. Download Stats ..::: Connection is:: 1371 Kbps about 1.4 Mbps (tested with 1496 KB) Download Speed is:: 167 KB/s Tested From:: http://www.testmy.net/ Test Time:: Thu Feb 3 09:57:18 CST 2005 Bottom Line:: 24X faster than 56K 1MB download in 6.13 sec Validation Link:: https://testmy.net/id-3042LD1E9 Quote Link to comment Share on other sites More sharing options...
VanBuren Posted February 3, 2005 CID Share Posted February 3, 2005 looking good VanBuren Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.