Jump to content

SmartBro AP


Guest ExtremeFusion

Recommended Posts

Guest ExtremeFusion

Here is a list of APs which I can switch to here in my place at Pulong Buhangin, Sta. Maria, Bulacan

As you can see my current index has a low performing stat..

And the alternatives were not that good also, even worst..

I just want to know especially for those who have super fast speed above SMARTBROKEN advertise speed..their APs stats because sometimes I have an RSSI (received signal strength indicator) of 700 -800 with a jitter of 1 - 2 but still I'm getting speeds like 10 - 20 kB/s with direct connection to the internet (without proxies)...

I would particularly like to see Coolbuster2007, Becman, joserizal and heaven and ****'s AP stats.. and those of which they use to switch on to....

Here is mine:

Current entry index: 1

*********************************************

Index: 0 Frequency: 5755.00 MHz ESN: 0a-00-3e-f2-91-32

Jitter: 2 RSSI: 474 Power Level: -76 Beacon Count: 12 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 402 SectorID: 1 Color Code: 211 BeaconVersion: 1 SectorUserCount: 49

NumULHalfSlots: 18 NumDLHalfSlots: 54 NumULContSlots: 3

*********************************************

Index: 1 Frequency: 5795.00 MHz ESN: 0a-00-3e-f2-91-26

Jitter: 1 RSSI: 695 Power Level: -71 Beacon Count: 5 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 3479 feet TxBER: 1 EBcast: 1

Session Count: 1 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 972 SectorID: 2 Color Code: 212 BeaconVersion: 1 SectorUserCount: 28

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 2 Frequency: 5835.00 MHz ESN: 0a-00-3e-f2-91-36

Jitter: 7 RSSI: 254 Power Level: -81 Beacon Count: 8 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1239 SectorID: 3 Color Code: 213 BeaconVersion: 1 SectorUserCount: 2

NumULHalfSlots: 18 NumDLHalfSlots: 54 NumULContSlots: 3

Link to comment
Share on other sites

Guest ExtremeFusion

@ becman

that's lot of APs, though there is only 2 acceptable option to switch on to...

but i can see the rssi is close to 1000 (975 to be exact) APs here never reach that...  :-|

Link to comment
Share on other sites

here's mine  :wink:

Current entry index: 2

*********************************************

Index: 0 Frequency: 5735.00 MHz ESN: 0a-00-3e-f2-34-29

Jitter: 6 RSSI: 322 Power Level: -79 Beacon Count: 2 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 2018 SectorID: 4 Color Code: 10 BeaconVersion: 1 SectorUserCount: 20

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 1 Frequency: 5755.00 MHz ESN: 0a-00-3e-f2-34-ec

Jitter: 2 RSSI: 1021 Power Level: -55 Beacon Count: 21 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 733 SectorID: 4 Color Code: 4 BeaconVersion: 1 SectorUserCount: 77

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 2 Frequency: 5795.00 MHz ESN: 0a-00-3e-f2-31-9d

Jitter: 2 RSSI: 778 Power Level: -67 Beacon Count: 21 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 1470 feet TxBER: 1 EBcast: 1

Session Count: 1 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 173 SectorID: 5 Color Code: 5 BeaconVersion: 1 SectorUserCount: 24

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 3 Frequency: 5815.00 MHz ESN: 0a-00-3e-f2-34-ea

Jitter: 3 RSSI: 377 Power Level: -77 Beacon Count: 1 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1046 SectorID: 6 Color Code: 72 BeaconVersion: 1 SectorUserCount: 12

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 4 Frequency: 5815.00 MHz ESN: 0a-00-3e-f2-34-25

Jitter: 3 RSSI: 465 Power Level: -75 Beacon Count: 3 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 633 SectorID: 3 Color Code: 9 BeaconVersion: 1 SectorUserCount: 31

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 5 Frequency: 5835.00 MHz ESN: 0a-00-3e-f2-32-de

Jitter: 4 RSSI: 337 Power Level: -78 Beacon Count: 9 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1473 SectorID: 3 Color Code: 3 BeaconVersion: 1 SectorUserCount: 25

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 6 Frequency: 5835.00 MHz ESN: 0a-00-3e-f2-32-e4

Jitter: 4 RSSI: 280 Power Level: -79 Beacon Count: 4 BRcvW: 1 DFSEn: 0 FECEn: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 756 SectorID: 6 Color Code: 6 BeaconVersion: 1 SectorUserCount: 16

NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

i am switching between two AP's: color code 5 and 3.

color code 3 gives me higher speed but it is  :buck2: sometimes that's why i switch to color code 5.

why did i chose color code 3 instead of other AP's?

i don't know what's with that AP but i tried ALL of them and found only color code 3 to give me the maximum speed w/ tweaks. i've been using that for our other 2 smartbro connections (my cousin's and aunt's). most of the time it stands above the rest and we're really satisfied w/ it.  :smitten:

Link to comment
Share on other sites

i use color code 36

*********************************************

Index: 0 Frequency: 5735.0 MHz ESN: 0a-00-3e-f2-92-3b

Jitter: 2 RSSI: 589 Power Level: -75 Beacon Count: 3 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 68 SectorID: 1 Color Code: 31 BeaconVersion: 1 SectorUserCount: 1

Frequency: 5735 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 1 Frequency: 5775.0 MHz ESN: 0a-00-3e-f2-92-77

Jitter: 10 RSSI: 220 Power Level: -83 Beacon Count: 4 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1395 SectorID: 2 Color Code: 32 BeaconVersion: 1 SectorUserCount: 0

Frequency: 5775 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 2 Frequency: 5775.0 MHz ESN: 0a-00-3e-f7-54-e2

Jitter: 2 RSSI: 344 Power Level: -80 Beacon Count: 9 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 614 SectorID: 5 Color Code: 35 BeaconVersion: 1 SectorUserCount: 4

Frequency: 5775 NumULHalfSlots: 17 NumDLHalfSlots: 53 NumULContSlots: 3

*********************************************

Index: 3 Frequency: 5815.0 MHz ESN: 0a-00-3e-xx-xx-xx

Jitter: 1 RSSI: 1205 Power Level: -62 Beacon Count: 11 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 2793 feet TxBER: 1 EBcast: 1

Session Count: 3 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 869 SectorID: 6 Color Code: 36 BeaconVersion: 1 SectorUserCount: 4

Frequency: 5815 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

*********************************************

Index: 4 Frequency: 5815.0 MHz ESN: 0a-00-3e-f2-92-76

Jitter: 4 RSSI: 274 Power Level: -82 Beacon Count: 5 BRcvW: 1 DFS: 0 FEC: 0

Type: Multipoint Avail: 1 Age: 0 Lockout: 0 RegFail 0 Range: 0 feet TxBER: 1 EBcast: 1

Session Count: 0 NoLUIDS: 0 OutOfRange: 0 AuthFail: 0 EncryptFail: 0 Rescan Req: 0

FrameNumber: 1552 SectorID: 3 Color Code: 33 BeaconVersion: 1 SectorUserCount: 0

Frequency: 5815 NumULHalfSlots: 18 NumDLHalfSlots: 55 NumULContSlots: 3

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...