x_6985381 Posted March 1, 2008 CID Share Posted March 1, 2008 My line quality is pretty horrid, pings jumping and ranging so I went into the modem page: 192.168.100.1 and I see that my transmit power is 46dBmV and my Receive power is -8.3dBmV is this normal, I had a 15/1 connection in new york that had a 35dBmV transmit and was just wondering since this is a lower internet connection 5/512 Just wondering... Link to comment Share on other sites More sharing options...
mudmanc4 Posted March 1, 2008 CID Share Posted March 1, 2008 Not sure, you have me curiouse enough to look into it further. Here's a comparison for you, I have 15/7, from TWC. Downstream Power -7.2 dBmV Upstream Power 46.8 dBmV Look into the splitter, and cables, as well as the ends, make sure they are in good condition. From what I read, this plays a big part. Link to comment Share on other sites More sharing options...
coknuck Posted March 1, 2008 CID Share Posted March 1, 2008 Downstream Power: good +10 to -10, best being 0 Upstream Power: 0 - 50+, higher the better Edit: these are mine. Downstream Freq/Power: 681.000 MHz 5 dBmV Signal to Noise Ratio: 36 dB Modulation: QAM256 Upstream Freq/Power: 36.000 MHz 28 dBmV Channel Type: DOCSIS 1.x (TDMA) Symbol Rate: 2560 kSym/sec Modulation: QAM16 Link to comment Share on other sites More sharing options...
cajaks2 Posted March 12, 2008 CID Share Posted March 12, 2008 Downstream Freq/Power: 579.000 MHz -3 dBmV Signal to Noise Ratio: 35 dB Modulation: QAM256 Upstream Freq/Power: 34.000 MHz 46 dBmV Channel Type: DOCSIS 1.x (TDMA) Symbol Rate: 2560 kSym/sec Modulation: QAM16 Link to comment Share on other sites More sharing options...
TimPawlak Posted March 13, 2008 CID Share Posted March 13, 2008 Downstream Freq/Power: 543.000 MHz 14 dBmV Signal to Noise Ratio: 37 dB Modulation: QAM256 -------------------------------------------------------------------------------- Upstream Freq/Power: 35.000 MHz 37 dBmV Channel Type: DOCSIS 1.x (TDMA) Symbol Rate: 2560 kSym/sec Modulation: QPSK downstream--- should i get my lines checked out? Link to comment Share on other sites More sharing options...
mudmanc4 Posted March 13, 2008 CID Share Posted March 13, 2008 Downstream Freq/Power: 543.000 MHz 14 dBmV Signal to Noise Ratio: 37 dB Modulation: QAM256 -------------------------------------------------------------------------------- Upstream Freq/Power: 35.000 MHz 37 dBmV Channel Type: DOCSIS 1.x (TDMA) Symbol Rate: 2560 kSym/sec Modulation: QPSK downstream--- should i get my lines checked out? I did some checking and it seems as if for fios, anywhere from 0 +/- 15 is good, besides, look @ your speeds, outta site! That is fios right? Link to comment Share on other sites More sharing options...
.thumb.jpg.8c31542255bb3cc7d7d90c8909679b27.jpg)
Recommended Posts