b12yante Posted May 18, 2009 CID Share Posted May 18, 2009 I run my u torrent and i shows like this... after 9 mins. to be exact, it show a yellow triangle with an exclamation inside And I tried to test my internet speed: i got a .28 Mb/s which is equivalent to 286.72 kB/s and my Download speed in uTorrent is only ranging from 20kB/s to 30kB/s even though there is enough seeders that shows in panel... And in rapidshare i only got speed d'load ranging from 40kB/s to 65kB/s. Shug7272: Message sent explaining why images were removed. I followed the instructions given by coolbuster , tnx for this one by the way... Title: Re: Smartbro Utorrent Setup Post by: coolbuster on August 05, 2007, 02:24:10 AM i advise you to not mess up with your canopy. dont change anything except the dl/ul throughput and the dl/ul burst. now try these utorrent settings: 1. go to preferences/downloads: uncheck "Append .!ut to incomplete files"; check "Pre-allocate all files"; check "Prevent standby if there are active torrents". 2. go to connection: make sure you use a value above 40000 in "Port used for incoming connections". uncheck "Randomize ports..."; uncheck "Enable UPnP port mapping; uncheck "Enable NAT-PMP port mapping; check "Add uTorrent to Windows Firewall Exceptions" (very important). Set Maximum upload rate = 60; Maximum download rate = 0 (w/c is unlimited) 3. go to BitTorrent: Global maximum number of connections = 375; Maximum number of connected peers per torrent = 100; Number of upload slots per torrent = 4; check "Use additional upload slots if upload speed < 90%; check "Enable DHT Network", "Enable DHT for new torrents", "Asl tracker for scrape info", "Enable peer exchange"; enable outgoing Protocol Encryption; check Allow incoming legacy connections. click apply. 4. go to Advanced: click "net.max_halfopen", in the Value box put 100, click set, apply. click "peer.disconnect_inactive_interval", in the value box put 600, click set, apply, ok. 5. restart uTorrent. See to it that your torrent will have the most number of seeders than your peers. you download from the seeders, upload to your peers. Also make sure your firewall not just allow uTorrent.exe but also the TCP & UDP port being used. Try it and post the result. Please help... Thanks. Quote Link to comment Share on other sites More sharing options...
tdawnaz Posted May 19, 2009 CID Share Posted May 19, 2009 run a speed test from this site and post your results...that other site is not very accurate...maybe their forum could help you...just kidding they don't have a forum anyway...just run a test from here and post the results welcome to the forum...someone will be in here to help u soon Quote Link to comment Share on other sites More sharing options...
brentvece Posted May 19, 2009 CID Share Posted May 19, 2009 You are mixing up megabits per second and megabytes per second 280 Kbps is 34.18 kB/s Or 0.28 Mbps ::: 0.03 MB/sec (this is the converter tool from this website) You are maxing your connection out Quote Link to comment Share on other sites More sharing options...
Blako Posted May 21, 2009 CID Share Posted May 21, 2009 On their website you got 280 Kbps is 34.18 kB/s Or 0.28 Mbps ::: 0.03 MB/sec (this is the converter tool from this website) You are maxing your connection out The lowercase "b" is bits and uppercase "B" is bytes. On this site you tested at 232 kbps or (28 kB/s) thats 232 kbits/sec (divided by 8 bits = 1 byte) = 28 kByte/sec 286.72 kB/s and my Download speed in uTorrent is only ranging from 20kB/s to 30kB/s Brentvece is correct, your not running at 30kB/s of 286KB/s, you doing 30kB/s out of 28-34kB/s. What is your smartbro advertised speed by the way? I would also recommend the calc http://www.testmy.net/tools/convert.php Quote Link to comment Share on other sites More sharing options...
Shug7272 Posted May 21, 2009 CID Share Posted May 21, 2009 You are mixing up megabits per second and megabytes per second 280 Kbps is 34.18 kB/s Or 0.28 Mbps ::: 0.03 MB/sec (this is the converter tool from this website) You are maxing your connection out Yea as for your stats you are maxing out your connection but that still seems WAY too slow... Im with momma, run a test here and post the results. I also sent you a pm explaining why I altered your post. On their website you got The lowercase "b" is bits and uppercase "B" is bytes. On this site you tested at 232 kbps or (28 kB/s) thats 232 kbits/sec (divided by 8 bits = 1 byte) = 28 kByte/sec Brentvece is correct, your not running at 30kB/s of 286KB/s, you doing 30kB/s out of 28-34kB/s. What is your smartbro advertised speed by the way? I would also recommend the calc http://www.testmy.net/tools/convert.php Great explanation! Quote Link to comment Share on other sites More sharing options...
b12yante Posted May 22, 2009 Author CID Share Posted May 22, 2009 oh! i see, didn't notice the lowercase kb & the uppercase kB... thanks to all... Now I know... But is there any other way to speed up my d'load? like tweaks or the canopy thing? Quote Link to comment Share on other sites More sharing options...
tommie gorman Posted May 22, 2009 CID Share Posted May 22, 2009 Easiest way I know is the TCP Optimizer if not using coolbusters stuff. http://www.testmy.net/t-1013 which leads to... https://www.speedguide.net/ which leads to ... https://www.speedguide.net/downloads.php Just follow the instructions and your home. Quote Link to comment Share on other sites More sharing options...
Shug7272 Posted May 22, 2009 CID Share Posted May 22, 2009 Easiest way I know is the TCP Optimizer if not using coolbusters stuff. http://www.testmy.net/t-1013 which leads to... https://www.speedguide.net/ which leads to ... https://www.speedguide.net/downloads.php Just follow the instructions and your home. We do host TCPoptimizer here though. http://www.testmy.net/forum/index.php?action=dlattach;topic=1013.0;attach=21260 Quote Link to comment Share on other sites More sharing options...
tommie gorman Posted May 22, 2009 CID Share Posted May 22, 2009 When did that get there? My bad, you used to have to follow the links. Quote Link to comment Share on other sites More sharing options...
Shug7272 Posted May 22, 2009 CID Share Posted May 22, 2009 When did that get there? My bad, you used to have to follow the links. Man you are flashing WAY back old man. . Hell I dont know, its been a long while though. Quote Link to comment Share on other sites More sharing options...
tommie gorman Posted May 22, 2009 CID Share Posted May 22, 2009 Man you are flashing WAY back old man. . Hell I dont know, its been a long while though. Man that was some good dope. HUh? Quote Link to comment Share on other sites More sharing options...
Shug7272 Posted May 22, 2009 CID Share Posted May 22, 2009 Man that was some good dope. HUh? You know the rules better than anyone, if you didnt share it dont brag about it. Quote Link to comment Share on other sites More sharing options...
tommie gorman Posted May 23, 2009 CID Share Posted May 23, 2009 You know the rules better than anyone, if you didnt share it dont brag about it. K man. Quote Link to comment Share on other sites More sharing options...
Shug7272 Posted May 23, 2009 CID Share Posted May 23, 2009 :haha: :haha: That baby is hitting that shit like a man! Quote Link to comment Share on other sites More sharing options...
tdawnaz Posted May 23, 2009 CID Share Posted May 23, 2009 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.