MCpoolish Posted October 19, 2009 CID Share Posted October 19, 2009 hi! im just a new here and i just got my new connection > smart bro.. just searching the web for smart bro tweak cause my i want to improve my speed and my ping in online games.. but how can i tweak my canopy if i cant even access the canopy config? i already tried 169.254.3.3 and 10.20.30.40 but no luck.. can anyone help me pls ? Link to comment Share on other sites More sharing options...
mudmanc4 Posted October 19, 2009 CID Share Posted October 19, 2009 Here, check this out, see if it works for you....... This works. I've tried it as well when I accidentally enabled the DHCP in my canopy. Here's what I did: 1. Turn off your router. 2. Unplug the power from the antenna. 3. Turn back the router on and attach the PC LAN cable to one of the LAN ports. 4. Plug the antenna back to the power then plug the antenna LAN cable to one of the LAN ports of the router. 5. Do an IPCONFIG in the command prompt. In my case my IP address was 192.168.1.102. The settings in my Linksys router lists 192.168.1.100 as the starting IP for DHCP allocation. 6. How to did I find out the IP address of the canopy? Try pinging the range of the IP addresses set by your router. Since my IP address on the PC was 192.168.1.102, I guessed that the canopy's IP might be 192.168.1.101. But I didn't get any replies so I tried pingin 192.168.1.100 and I got ping replies and I was able to access the canopy thru a web browser. 7. Go to the DHCP setting then disable it. Save then reboot. 8. You can now attach the canopy's cable directly to your PC's LAN card or on the Router's WAN/Internet port. From here you can now access the canopy normally like you used to. 169.254.1.1. http://www.testmy.net/t-27172.0;prev_next=next Link to comment Share on other sites More sharing options...
MCpoolish Posted October 20, 2009 Author CID Share Posted October 20, 2009 nope sorry dont have any router here? is there anyway to fix my prob? :sad3: Link to comment Share on other sites More sharing options...
mudmanc4 Posted October 20, 2009 CID Share Posted October 20, 2009 Alright, here go to start -> run -> cmd.exe. On the command promt, type "arp -a" . The output will be several or a couple IP addresses. Don't type the quotes in You'll se the output in a couple ways, one, will look something like this 10.0.0.0 23:3:XXXX And the actual IP to the canopy will be the one such as this >> 10.247.22.234 not all zero's Then you can enter this into your browser window to access the canopy Link to comment Share on other sites More sharing options...
MCpoolish Posted October 21, 2009 Author CID Share Posted October 21, 2009 sorry but i already tried it.. even i change the ip on my lan there's no other ip other than 192.168.224.1? Microsoft Windows XP [Version 5.1.2600] © Copyright 1985-2001 Microsoft Corp. C:Documents and SettingsAdministrator>arp -a Interface: 192.168.255.249 --- 0x10003 Internet Address Physical Address Type 192.168.224.1 00-50-b7-f0-a5-e3 dynamic C:Documents and SettingsAdministrator> Link to comment Share on other sites More sharing options...
akogwapo14 Posted November 20, 2009 CID Share Posted November 20, 2009 http://169.254.1.1/ Link to comment Share on other sites More sharing options...
Recommended Posts