Jump to content

Road Runner Upload Speed Help


Flashmaster

Recommended Posts

Also My speed Never stays the same Keeps Changing Every Speed Test :( I know i can get to 4500 But this time only to 1000

2005-02-28 15:33:44 EST: 1876 / 190

Your download speed : 1921509 bps, or 1876 kbps.

A 234.5 KB/sec transfer rate.

Your upload speed : 194827 bps, or 190 kbps.

http://speedtest.cogeco.net/

And the other one

http://nitro.ucsc.edu/

TCP/Web100 Network Diagnostic Tool v5.3.3a

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 299.61Kb/s

running 10s inbound test (server to client) . . . . . . 4.17Mb/s

Your PC is connected to a Cable/DSL modem

Information: Other network traffic is congesting the link

click START to re-test

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 299.61Kb/s

running 10s inbound test (server to client) . . . . . . 4.17Mb/s

------  Client System Details  ------

OS data: Name = Windows XP, Architecture = x86, Version = 5.1

Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_04

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 163.11 msec; the Packet size = 1460 Bytes; and

There were 21 packets retransmitted, 77 duplicate acks received, and 121 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.97% of the time.

  Contact your local network administrator to report a network problem

    Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Client IP addresses are preserved End-to-End

WEB100 Kernel Variables:

Client: localhost/127.0.0.1

AckPktsIn: 1845

AckPktsOut: 0

BytesRetrans: 30660

CongAvoid: 1420

CongestionOverCount: 0

CongestionSignals: 1

CountRTT: 1617

CurCwnd: 116800

CurMSS: 1460

CurRTO: 410

CurRwinRcvd: 640000

CurRwinSent: 5840

CurSsthresh: 86140

DSACKDups: 0

DataBytesIn: 0

DataBytesOut: 5305640

DataPktsIn: 0

DataPktsOut: 3634

DupAcksIn: 77

ECNEnabled: 0

FastRetran: 1

MaxCwnd: 172280

MaxMSS: 1460

MaxRTO: 440

MaxRTT: 230

MaxRwinRcvd: 640000

MaxRwinSent: 5840

MaxSsthresh: 86140

MinMSS: 1460

MinRTO: 300

MinRTT: 90

MinRwinRcvd: 40000

MinRwinSent: 5840

NagleEnabled: 1

OtherReductions: 0

PktsIn: 1845

PktsOut: 3634

PktsRetrans: 21

X_Rcvbuf: 103424

RcvWinScale: 7

SACKEnabled: 3

SACKsRcvd: 121

SendStall: 0

SlowStart: 172

SampleRTT: 200

SmoothedRTT: 190

X_Sndbuf: 103424

SndWinScale: 4

SndLimTimeRwin: 0

SndLimTimeCwnd: 10035554

SndLimTimeSender: 2516

SndLimTransRwin: 0

SndLimTransCwnd: 1

SndLimTransSender: 1

SndLimBytesRwin: 0

SndLimBytesCwnd: 5305640

SndLimBytesSender: 0

SubsequentTimeouts: 0

SumRTT: 263750

Timeouts: 0

TimestampsEnabled: 0

WinScaleRcvd: 4

WinScaleSent: 7

DupAcksOut: 0

StartTimeUsec: 89730

Duration: 10045015

c2sData: 2

c2sAck: 2

s2cData: 9

s2cAck: 3

half_duplex: 0

link: 100

congestion: 1

bad_cable: 0

mismatch: 0

spd: 0.00

bw: 4.12

loss: 0.000275179

avgrtt: 163.11

waitsec: 0.00

timesec: 10.00

order: 0.0417

rwintime: 0.0000

sendtime: 0.0003

cwndtime: 0.9997

rwin: 4.8828

swin: 64.0000

cwin: 1.3144

rttsec: 0.163111

Sndbuf: 8388608

Checking for mismatch condition

(cwndtime > .3) [0.99>.3], (MaxSsthresh > 0) [86140>0],

(PktsRetrans/sec > 2) [2.1>2], (estimate > 2) [4.12>2]

Checking for mismatch on uplink

(speed > 50 [0>50], (xmitspeed < 5) [0.29<5]

(rwintime > .9) [0>.9], (loss < .01) [2.75<.01]

Checking for excessive errors condition

(loss/sec > .15) [2.75>.15], (cwndtime > .6) [0.99>.6],

(loss < .01) [2.75<.01], (MaxSsthresh > 0) [86140>0]

Checking for 10 Mbps link

(speed < 9.5) [0<9.5], (speed > 3.0) [0>3.0]

(xmitspeed < 9.5) [0.29<9.5] (loss < .01) [2.75<.01], (mylink > 0) [3.0>0]

Checking for Wireless link

(sendtime = 0) [3.0E=0], (speed < 5) [0<5]

(Estimate > 50 [4.12>50], (Rwintime > 90) [0>.90]

(RwinTrans/CwndTrans = 1) [0/1=1], (mylink > 0) [3.0>0]

Checking for DSL/Cable Modem link

(speed < 2) [0<2], (SndLimTransSender = 0) [1=0]

(SendTime = 0) [3.0E-4=0], (mylink > 0) [3.0>0]

Checking for half-duplex condition

(rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30],

(SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10]

Checking for congestion

(cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0]

(MaxSsthresh > 0) [86140>0]

estimate = 4.12 based on packet size = 11Kbits, RTT = 163.11msec, and loss = 2.75179E-4

The theoretical network limit is 4.12 Mbps

The NDT server has a 8192.0 KByte buffer which limits the throughput to 392.37 Mbps

Your PC/Workstation has a 625.0 KByte buffer which limits the throughput to 29.93 Mbps

The network based flow control limits the throughput to 8.05 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet'

Link to comment
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

what firewall do you have?

also force 10 Mbps half duplex on your NIC

and install this https://www.speedguide.net/read_articles.php?id=1497

quote from http://dslnuts.com/tips_tricks.shtml

"Windows 2000 or XP: to change to half-duplex:

* Open Control Panel.

* Double-click Network and Dial-up Connections.

* Identify the icon for your cable modem connection: usually Local Area Connection.

* Right-click that icon and select Properties.

* Under the ethernet adapter icon, click the button Configure.

* Click the tab Advanced to bring it to the front:

* In the Property box, the property name to be selected varies according to model of ethernet card. Examples are: Network Link Selection, Media Type, Connection Type, Duplex Mode, or any similarly-named property which can have Values looking like Auto-Negotiation, or 10BT, or 10BaseT.

* In the Value box, select a value which either (a) explicitly says half-duplex or semi-duplex, or (B) at least does not say full-duplex [e.g. 10BaseT on its own is OK]. If there is a choice between 10 and 100 with half-duplex, choose the 10. Do not choose 10Base5, 10Base2, or AUI.

* Click OK to exit the Adapter settings.

* Click OK to exit the Connection properties. "

VanBuren :)

Link to comment
Share on other sites

i just quoted that guide, if you already forced your NIC to 10 Mbps half, then leave it like that

sign up here http://www.dslreports.com/tools

its free

make a linequality test

"Line Packet Loss Testing

Packet loss tests on your line, including identification of any problem routers en-route to you.."

when you get result, copy whole URL adress and paste it here

VanBuren :)

Link to comment
Share on other sites

Hey I tried But it cancles my Test

I might thing that 4% loss is from my modem :(

I got another one From when i lived in Ny From Optonline The model Number is

Surfboard sb3100 Can I uses That I tryed using it but gave me an ip like 192 and i unpluged it and shit but i dunno.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...