Jump to content

Improve Disconnections And Speed


planetleomars

Recommended Posts

THIS how you tweak smartbro to be able to get a stable and faster connection

1. Assign the TCP/IP Manually.

To be able to see what your IP, Subnet, and the default gateway, again go to Control Panel and then look for the Local Area Connection and then right click on it and choose Status and then click Support Tab, and then click Details, and there you will see the complete information of your IP address, Subnet Mask, Gateway, and DNS servers. Now you will have to copy and save those information on a paper or maybe a notepad and save it somewhere in your computer, because you will be needing those information later.

post-70907-12810269619723_thumb.jpg

post-70907-12810269733541_thumb.jpg

COPY THE IPv4 address, SUBNET MASK, AND DEFAULT GATEWAY.

For Windows XP:

GO TO RUN, then TYPE CMD, TYPE IPCONFIG.And copy the same details.

post-70907-12810281009855_thumb.jpg

2. How To Change Your DNS Servers?

Step 1. Go to Control Panel > Network Connections > Local Area Connection > General Tab > Properties > TCP/IP.

Step 2. Use the information that you saved earlier on each of the respective information. IP address, Subnet Mask, Gateway, and DNS (208.67.222.222 & 208.67.220.220).

post-70907-12810270964608_thumb.jpg

post-70907-12810271609789_thumb.jpg

post-70907-1281027172035_thumb.jpg

Here: type the IP, SUBNET MASK, AND DEFAULT GATEWAY THAT YOU COPIED.

FOR DNS: You can choose on the SELECTIONS BELOW.

Here are the DNS address that i have tried...

1. Google

•8.8.8.8 -PREFERRED DNS•8.8.4.4 - ALTERNATE DNS

2. ScrubIt

Public dns server address:

•67.138.54.100 - PREFERRED DNS

•207.225.209.66 - ALTERNATE DNS

3. dnsadvantage

Dnsadvantage free dns server list:

•156.154.70.1* - PREFERRED DNS

•156.154.71.1 - ALTERNATE DNS

4. OpenDNS

OpenDNS free dns server list:

•208.67.222.222 - PREFERRED DNS

•208.67.220.220* - ALTERNATE DNS

5. vnsc-pri.sys.gtei.net

Public Name server IP address:

•4.2.2.1

•4.2.2.2

•4.2.2.3

•4.2.2.4

•4.2.2.5

•4.2.2.6

After you TYPED the DNS, Click on ADVANCED on the bottom right. and refer on the steps below.

post-70907-12810271888877_thumb.jpg

- just tick like whats in the pic.

post-70907-12810271986698_thumb.jpg

- just tick like whats in the pic.

post-70907-12810272655211_thumb.jpg

- just tick like whats in the pic.

After all the steps followed., click OK then disbled/ enable LAN.

Step 3. After placing in the right information, double check and then click OK on both Pop Up windows that opened.

Step 4. Go back to Control Panel > Network Connections. Now Right-Click on Local Area Connection and then click Repair. This is to refresh the connection and DNS servers that your connection will use.

Step 5. Now you can check the difference of the speed through www.testmy.net and compare what difference it made since using the default DNS servers of your Internet Provider.

I HOPE THESE WILL HELP YOU GUYZ.

post-70907-12810295014762_thumb.jpg

Link to comment
Share on other sites

i'm in a remote location where connetion normally drops out every 5-15 mins and connection is a bit slow.

Before i get 30-50 kbps.

Here's my speed now:

:::.. testmy.net test results ..:::

Download Connection is:: 1036 Kbps about 1.04 Mbps (tested with 1024 kB)

Download Speed is:: 126 kB/s

Upload Connection is:: 167 Kbps about 0.2 Mbps (tested with 386 kB)

Upload Speed is:: 20 kB/s

Not bad for a remote location.

Thanks

Link to comment
Share on other sites

  • CA3LE locked this topic
Guest
This topic is now closed to further replies.
×
×
  • Create New...