Jump to content

Speeds Slowed Down


hoodlegend

Recommended Posts

Hey VanBuren! I haven't been gettin 90% of my advertised speed, which is 6000/500. My uploads have been slow and my downloads are low. My internet provider is W.O.W [Wide Open West]. I need help please. When I'm downloading a large file.....it only downloads at aroud 300 kb or less.

:::.. Download Stats ..:::

Connection is:: 5291 Kbps about 5.3 Mbps (tested with 5983 KB)

Download Speed is:: 646 KB/s

Tested From:: http://www.testmy.net/

Test Time:: Mon Mar 7 18:22:22 EST 2005

Bottom Line:: 94X faster than 56K 1MB download in 1.59 sec

Diagnosis: Awesome! 20% + : 84.81 % faster than the average for host (wideopenwest.com)

Validation Link:: https://testmy.net/stats/id-JOF2A3815

:::.. Upload Stats ..:::

Connection is:: 458 Kbps about 0.5 Mbps (tested with 579 KB)

Upload Speed is:: 56 KB/s

Tested From:: http://www.testmy.net/

Test Time:: Mon Mar 7 18:28:30 EST 2005

Bottom Line:: 8X faster than 56K 1MB upload in 18.29 sec

Diagnosis: Awesome! 20% + : 47.27 % faster than the average for host (wideopenwest.com)

Validation Link:: https://testmy.net/stats/id-R2LOYUXS5

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 554.56Kb/s

running 10s inbound test (server to client) . . . . . . 746.03kb/s

------  Client System Details  ------

OS data: Name = Windows XP, Architecture = x86, Version = 5.1

Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 87.01 msec; the Packet size = 1460 Bytes; and

There were 20 packets retransmitted, 95 duplicate acks received, and 104 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.97% of the time.

Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Client IP addresses are preserved End-to-End

Link to comment
Share on other sites

[1.] I'm running Windows XP Pro SP2 with the Fix.

[2.] My Service is Wide Open West with advertised speeds of 6000/500

[3.] I have the Cablenut program. Here's my Tweak Tester results.... http://ttester.broadbandreports.com/tweak/block:1f3516a?service=cable&speed=6000&os=winXP&via=normal

[4.] Download Test Results.

:::.. Download Stats ..:::

Connection is:: 4808 Kbps about 4.8 Mbps (tested with 2992 KB)

Download Speed is:: 587 KB/s

Tested From:: http://www.testmy.net/

Test Time:: Tue Mar 8 15:12:19 EST 2005

Bottom Line:: 86X faster than 56K 1MB download in 1.74 sec

Diagnosis: Awesome! 20% + : 68.05 % faster than the average for host (wideopenwest.com)

Validation Link:: https://testmy.net/stats/id-K9H7L851A

[4b.] Nitro Test Results.

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 560.58Kb/s

running 10s inbound test (server to client) . . . . . . 1.10Mb/s

------  Client System Details  ------

OS data: Name = Windows XP, Architecture = x86, Version = 5.1

Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 80.45 msec; the Packet size = 1460 Bytes; and

There were 21 packets retransmitted, 129 duplicate acks received, and 141 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.97% of the time.

Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Client IP addresses are preserved End-to-End

Link to comment
Share on other sites

:::.. Download Stats ..:::

Connection is:: 5343 Kbps about 5.3 Mbps (tested with 2992 KB)

Download Speed is:: 652 KB/s

Tested From:: http://www.testmy.net/

Test Time:: Tue Mar 8 16:10:26 EST 2005

Bottom Line:: 95X faster than 56K 1MB download in 1.57 sec

Diagnosis: Awesome! 20% + : 85.39 % faster than the average for host (wideopenwest.com)

Validation Link:: https://testmy.net/stats/id-L4Z5X7NK6

Link to comment
Share on other sites

No, it's not but these are the results I got.  :)

TCP/Web100 Network Diagnostic Tool v5.3.3d

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 5.26Mb/s

running 10s inbound test (server to client) . . . . . . 5.53Mb/s

Your PC is connected to a Cable/DSL modem

Information: Other network traffic is congesting the link

Link to comment
Share on other sites

No, it's not but these are the results I got.  :)

TCP/Web100 Network Diagnostic Tool v5.3.3d

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 5.26Mb/s

running 10s inbound test (server to client) . . . . . . 5.53Mb/s

Your PC is connected to a Cable/DSL modem

Information: Other network traffic is congesting the link

:haha: nice upload  ;)

i been emailing them about upload test after i scored 41 Mbps against a Swizz NDT server, so i think they working on it

if you got the time, click report problem and post these to them and tell them your cap is 768 Kbps hehe

VanBuren :)

Link to comment
Share on other sites

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 558.30Kb/s

running 10s inbound test (server to client) . . . . . . 542.43kb/s

------  Client System Details  ------

OS data: Name = Windows XP, Architecture = x86, Version = 5.1

Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 91.96 msec; the Packet size = 1460 Bytes; and

There were 20 packets retransmitted, 78 duplicate acks received, and 84 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.97% of the time.

Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Client IP addresses are preserved End-to-End

WEB100 Kernel Variables:

Client: localhost/127.0.0.1

AckPktsIn: 289

AckPktsOut: 0

BytesRetrans: 29200

CongAvoid: 172

CongestionOverCount: 0

CongestionSignals: 14

CountRTT: 194

CurCwnd: 10220

CurMSS: 1460

CurRTO: 310

CurRwinRcvd: 769536

CurRwinSent: 5840

CurSsthresh: 4380

DSACKDups: 0

DataBytesIn: 0

DataBytesOut: 737300

DataPktsIn: 0

DataPktsOut: 505

DupAcksIn: 78

ECNEnabled: 0

FastRetran: 14

MaxCwnd: 13140

MaxMSS: 1460

MaxRTO: 350

MaxRTT: 230

MaxRwinRcvd: 769536

MaxRwinSent: 5840

MaxSsthresh: 5840

MinMSS: 1460

MinRTO: 270

MinRTT: 60

MinRwinRcvd: 48096

MinRwinSent: 5840

NagleEnabled: 1

OtherReductions: 0

PktsIn: 289

PktsOut: 505

PktsRetrans: 20

X_Rcvbuf: 103424

RcvWinScale: 7

SACKEnabled: 3

SACKsRcvd: 84

SendStall: 0

SlowStart: 18

SampleRTT: 70

SmoothedRTT: 80

X_Sndbuf: 103424

SndWinScale: 4

SndLimTimeRwin: 0

SndLimTimeCwnd: 10025702

SndLimTimeSender: 2641

SndLimTransRwin: 0

SndLimTransCwnd: 1

SndLimTransSender: 1

SndLimBytesRwin: 0

SndLimBytesCwnd: 737300

SndLimBytesSender: 0

SubsequentTimeouts: 0

SumRTT: 17840

Timeouts: 0

TimestampsEnabled: 0

WinScaleRcvd: 4

WinScaleSent: 7

DupAcksOut: 0

StartTimeUsec: 678575

Duration: 10075736

c2sData: 2

c2sAck: 2

s2cData: 9

s2cAck: 2

half_duplex: 0

link: 100

congestion: 1

bad_cable: 0

mismatch: 0

spd: 0.00

bw: 0.73

loss: 0.027722772

avgrtt: 91.96

waitsec: 0.00

timesec: 10.00

order: 0.2699

rwintime: 0.0000

sendtime: 0.0003

cwndtime: 0.9997

rwin: 5.8711

swin: 64.0000

cwin: 0.1003

rttsec: 0.091959

Sndbuf: 8388608

aspd: 1.20243

Checking for mismatch on uplink

(speed > 50 [0>50], (xmitspeed < 5) [0.55<5]

(rwintime > .9) [0>.9], (loss < .01) [0.02<.01]

Checking for excessive errors condition

(loss/sec > .15) [0.00>.15], (cwndtime > .6) [0.99>.6],

(loss < .01) [0.02<.01], (MaxSsthresh > 0) [5840>0]

Checking for 10 Mbps link

(speed < 9.5) [0<9.5], (speed > 3.0) [0>3.0]

(xmitspeed < 9.5) [0.55<9.5] (loss < .01) [0.02<.01], (mylink > 0) [3.0>0]

Checking for Wireless link

(sendtime = 0) [3.0E=0], (speed < 5) [0<5]

(Estimate > 50 [0.73>50], (Rwintime > 90) [0>.90]

(RwinTrans/CwndTrans = 1) [0/1=1], (mylink > 0) [3.0>0]

Checking for DSL/Cable Modem link

(speed < 2) [0<2], (SndLimTransSender = 0) [1=0]

(SendTime = 0) [3.0E-4=0], (mylink > 0) [3.0>0]

Checking for half-duplex condition

(rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30],

(SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10]

Checking for congestion

(cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0]

(MaxSsthresh > 0) [5840>0]

estimate = 0.73 based on packet size = 11Kbits, RTT = 91.96msec, and loss = 0.027722772

The theoretical network limit is 0.73 Mbps

The NDT server has a 8192.0 KByte buffer which limits the throughput to 695.96 Mbps

Your PC/Workstation has a 751.0 KByte buffer which limits the throughput to 63.84 Mbps

The network based flow control limits the throughput to 1.09 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'T1'

:::.. Download Stats ..:::

Connection is:: 4954 Kbps about 5 Mbps (tested with 5983 KB)

Download Speed is:: 605 KB/s

Tested From:: http://www.testmy.net/

Test Time:: Tue Mar 8 16:27:38 EST 2005

Bottom Line:: 88X faster than 56K 1MB download in 1.69 sec

Diagnosis: Awesome! 20% + : 71.72 % faster than the average for host (wideopenwest.com)

Validation Link:: https://testmy.net/stats/id-FKIMBQRGP

try another NDT server, your loosing alot of packets to that server

http://e2epi.internet2.edu/ndt/ndt-server-list.html

VanBuren :)

Link to comment
Share on other sites

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 548.63Kb/s

running 10s inbound test (server to client) . . . . . . 4.74Mb/s

------  Client System Details  ------

OS data: Name = Windows XP, Architecture = x86, Version = 5.1

Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Half Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 50.35 msec; the Packet size = 1460 Bytes; and

There were 18 packets retransmitted, 217 duplicate acks received, and 249 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.93% of the time.

  Contact your local network administrator to report a network problem

    Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Client IP addresses are preserved End-to-End

WEB100 Kernel Variables:

Client: localhost/127.0.0.1

AckPktsIn: 2154

AckPktsOut: 0

BytesRetrans: 26280

CongestionSignals: 9

CountRTT: 1899

CurrentCwnd: 52560

CurrentMSS: 1460

CurrentRTO: 270

CurrentRwinRcvd: 769536

CurrentRwinSent: 5840

CurrentSsthresh: 23360

DSACKDups: 0

DataBytesIn: 0

DataBytesOut: 5910080

DataPktsIn: 0

DataPktsOut: 4048

DupAcksIn: 217

ECNEnabled: 0

FastRetran: 9

MaxCwnd: 83220

MaxMSS: 1460

MaxRTO: 270

MaxRTT: 100

MaxRwinRcvd: 769536

MaxRwinSent: 5840

MaxSsthresh: 40880

MinMSS: 1460

MinRTO: 230

MinRTT: 30

MinRwinRcvd: 48096

MinRwinSent: 5840

NagleEnabled: 1

PktsIn: 2156

PktsOut: 4048

PktsRetrans: 18

Rcvbuf: 128000

SACKEnabled: 3

SACKsRcvd: 249

SmoothedRTT: 70

Sndbuf: 128000

SndLimTimeRwin: 0

SndLimTimeCwnd: 10012282

SndLimTimeSender: 6979

SndLimTransRwin: 0

SndLimTransCwnd: 1

SndLimTransSender: 1

SndLimBytesRwin: 0

SndLimBytesCwnd: 5910080

SndLimBytesSender: 0

SumRTT: 95630

Timeouts: 0

TimestampsEnabled: 0

WinScaleRcvd: 4

WinScaleSent: 7

DupAcksOut: 0

StartTime: 2147483647

CurrTime: 10023272

c2sData: 2

c2sAck: 2

s2cData: 6

s2cAck: 3

Checking for mismatch condition

(cwndtime > .3) [0.99>.3], (MaxSsthresh > 0) [40880>0],

(PktsRetrans/sec > 2) [1.79>2], (estimate > 2) [4.69>2]

Checking for mismatch on uplink

(speed > 50 [4.71>50], (xmitspeed < 5) [0.54<5]

(rwintime > .9) [0>.9], (loss < .01) [0.00<.01]

Checking for excessive errors condition

(loss/sec > .15) [2.22>.15], (cwndtime > .6) [0.99>.6],

(loss < .01) [0.00<.01], (MaxSsthresh > 0) [40880>0]

Checking for 10 Mbps link

(speed < 9.5) [4.71<9.5], (speed > 3.0) [4.71>3.0]

(xmitspeed < 9.5) [0.54<9.5] (loss < .01) [0.00<.01], (link > 0) [0>0]

Checking for Wireless link

(sendtime = 0) [6.96=0], (speed < 5) [4.71<5]

(Estimate > 50 [4.69>50], (Rwintime > 90) [0>.90]

(RwinTrans/CwndTrans = 1) [0/1=1], (link > 0) [0>0]

Checking for DSL/Cable Modem link

(speed < 2) [4.71<2], (SndLimTransSender = 0) [1=0]

(SendTime = 0) [6.965583589448363E-4=0], (link > 0) [0>0]

Checking for half-duplex condition

(rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30],

(SenderTrans/sec > 30) [0.10>30], OR (link <= 10) [0<=10]

Checking for congestion

(cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0]

(MaxSsthresh > 0) [40880>0]

bw = 4.69 based on packet size = 11Kbits, RTT = 50.35msec, and loss = 0.002223320072516799

The theoretical network limit is 4.69 Mbps

The transmit buffer (125.0 KByte) limits the application to 19.39 Mbps

Your receive buffer (751.0 KByte) limits the application to 116.58 Mbps

The network based flow control limits the application to 12.60 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is 'OC-12', Server Acks report link is 'Ethernet'

From the Flint Michigan server.

Link to comment
Share on other sites

try this, if this dosent help, i suggest to contact your ISP

open cablenut, click delete cablenut tweaks and click save to registry

now set these values

all other fields must be blank

TcpWindowsize 64240

GlobalMaxTcpWindowSize 64240

now click save to registry and reboot

VanBuren :)

Link to comment
Share on other sites

:cool:

39200523634am4fy.jpg

Those Cablenut settings gave me these speeds.........

:::.. Download Stats ..:::

Connection is:: 6193 Kbps about 6.2 Mbps (tested with 12160 KB)

Download Speed is:: 756 KB/s

Tested From:: http://www.testmy.net/

Test Time:: Wed Mar 9 02:38:54 EST 2005

Bottom Line:: 111X faster than 56K 1MB download in 1.35 sec

Diagnosis: Awesome! 20% + : 113.18 % faster than the average for host (wideopenwest.com)

Validation Link:: https://testmy.net/stats/id-MQJOCRBVW

WEB100 Enabled Statistics:

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 527.41Kb/s

running 10s inbound test (server to client) . . . . . . 5.92Mb/s

------  Client System Details  ------

OS data: Name = Windows XP, Architecture = x86, Version = 5.1

Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

Information: throughput is limited by other network traffic.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 89.19 msec; the Packet size = 1460 Bytes; and

There were 28 packets retransmitted, 195 duplicate acks received, and 212 SACK blocks received

The connection was idle 0 seconds (0%) of the time

This connection is network limited 99.97% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Client IP addresses are preserved End-to-End

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...