Jump to content

can anybody help with speeds


wowitsjashon
 Share

Recommended Posts

i have earthlink cable and i'm no where near 5mbps

:::.. Download Stats ..:::

Connection is:: 3627 Kbps about 3.6 Mbps (tested with 7458 kB)

Download Speed is:: 443 kB/s

Tested From:: http://s121815182.onlinehome.us

Test Time:: 

Bottom Line:: 65X faster than 56K 1MB download in 2.31 sec

Diagnosis: 90% + Okay : running at 91.13 % of your hosts average (mindspring.com)

Validation Link:: https://testmy.net/stats/id-SYZROLP0V

:angry5: :angry5: :angry5:

can some one please help i live in Pinehurst NC

Link to post
Share on other sites

I believe people have to realize that all we can do is tweak everything on our end. If your ISP is having an issue than all the tweaks in the world will not help.

It would also help if you not only type your problem but offer other information like which Windows are you using are you connected to a router (wired or wireless) and are you using USB or Ethernet

Link to post
Share on other sites

hey wowitsjashon and welcome to the forum :)

set your NIC to 10 Mbps half duplex

quote from http://dslnuts.com/tips_tricks.shtml

"Windows 2000 or XP: to change to half-duplex:

* Open Control Panel.

* Double-click Network and Dial-up Connections.

* Identify the icon for your cable modem connection: usually Local Area Connection.

* Right-click that icon and select Properties.

* Under the ethernet adapter icon, click the button Configure.

* Click the tab Advanced to bring it to the front:

* In the Property box, the property name to be selected varies according to model of ethernet card. Examples are: Network Link Selection, Media Type, Connection Type, Duplex Mode, or any similarly-named property which can have Values looking like Auto-Negotiation, or 10BT, or 10BaseT.

* In the Value box, select a value which either (a) explicitly says half-duplex or semi-duplex, or (B) at least does not say full-duplex [e.g. 10BaseT on its own is OK]. If there is a choice between 10 and 100 with half-duplex, choose the 10. Do not choose 10Base5, 10Base2, or AUI.

* Click OK to exit the Adapter settings.

* Click OK to exit the Connection properties. "

download this attached file, unzip it and dubbleclick on it, now click save to registry and reboot

go to start-run-cmd

type pathping testmy.net and hit enter

now wait several minutes for it to complete

when done, rightclick choose all and hit enter

now paste all in a new post, also post a new speedtest score

use the 2992 KB test downstream and 1496 KB test upstream

VanBuren :)

Link to post
Share on other sites

Microsoft Windows XP [Version 5.1.2600]

© Copyright 1985-2001 Microsoft Corp.

C:Documents and SettingsOwner>pathping testmy.net

Tracing route to testmy.net [67.19.36.6]

over a maximum of 30 hops:

  0  your-us67pi6luv.earthlink.net [24.136.130.94]

  1  10.54.32.1

  2  srp1-0.fyvlncr-rtr2.nc.rr.com [24.88.225.2]

  3  son1-0-2.chrlncsa-rtr6.carolina.rr.com [24.93.64.29]

  4  son0-0-1.rlghncrdc-rtr3.nc.rr.com [24.93.64.54]

  5  so-8-1.car1.Washington1.Level3.net [67.29.172.5]

  6  ae-1-53.bbr1.Washington1.Level3.net [4.68.121.65]

  7  as-0-0.bbr2.Dallas1.Level3.net [64.159.0.137]

  8  ge-1-1-55.car3.Dallas1.Level3.net [4.68.122.134]

  9    *        *        *

Computing statistics for 225 seconds...

            Source to Here  This Node/Link

Hop  RTT    Lost/Sent = Pct  Lost/Sent = Pct  Address

  0                                          your-us67pi6luv.earthlink.net [24.

136.130.94]

                                0/ 100 =  0%  |

  1  11ms    0/ 100 =  0%    0/ 100 =  0%  10.54.32.1

                                0/ 100 =  0%  |

  2  11ms    0/ 100 =  0%    0/ 100 =  0%  srp1-0.fyvlncr-rtr2.nc.rr.com [24.

88.225.2]

                                0/ 100 =  0%  |

  3  14ms    0/ 100 =  0%    0/ 100 =  0%  son1-0-2.chrlncsa-rtr6.carolina.rr

.com [24.93.64.29]

                                0/ 100 =  0%  |

  4  14ms    0/ 100 =  0%    0/ 100 =  0%  son0-0-1.rlghncrdc-rtr3.nc.rr.com

[24.93.64.54]

                                0/ 100 =  0%  |

  5  32ms    0/ 100 =  0%    0/ 100 =  0%  so-8-1.car1.Washington1.Level3.net

[67.29.172.5]

                              100/ 100 =100%  |

  6  ---    100/ 100 =100%    0/ 100 =  0%  ae-1-53.bbr1.Washington1.Level3.ne

t [4.68.121.65]

                                0/ 100 =  0%  |

  7  ---    100/ 100 =100%    0/ 100 =  0%  as-0-0.bbr2.Dallas1.Level3.net [64

.159.0.137]

                                0/ 100 =  0%  |

  8  ---    100/ 100 =100%    0/ 100 =  0%  ge-1-1-55.car3.Dallas1.Level3.net

[4.68.122.134]

                                0/ 100 =  0%  |

  9  ---    100/ 100 =100%    0/ 100 =  0%  your-us67pi6luv [0.0.0.0]

Trace complete.

:::.. Download Stats ..:::

Connection is:: 1624 Kbps about 1.6 Mbps (tested with 2992 kB)

Download Speed is:: 198 kB/s

Tested From:: http://www.testmy.net/

Test Time:: Sun Apr 3 13:22:19 EDT 2005

Bottom Line:: 29X faster than 56K 1MB download in 5.17 sec

Diagnosis: May need help : running at only 40.95 % of your hosts average (mindspring.com)

Validation Link:: https://testmy.net/stats/id-KFRS4QC31

:::.. Upload Stats ..:::

Connection is:: 356 Kbps about 0.4 Mbps (tested with 1496 kB)

Upload Speed is:: 43 kB/s

Tested From:: http://www.testmy.net/

Test Time:: Sun Apr 3 13:23:41 EDT 2005

Bottom Line:: 6X faster than 56K 1MB upload in 23.81 sec

Diagnosis: Awesome! 20% + : 37.45 % faster than the average for host (mindspring.com)

Validation Link:: https://testmy.net/stats/id-K4GESD6YL

Link to post
Share on other sites

:::.. Download Stats ..:::

Connection is:: 3664 Kbps about 3.7 Mbps (tested with 7458 kB)

Download Speed is:: 447 kB/s

Tested From:: http://s122032664.onlinehome.us

Test Time:: 

Bottom Line:: 65X faster than 56K 1MB download in 2.29 sec

Diagnosis: 90% + Okay : running at 92.41 % of your hosts average (mindspring.com)

Validation Link:: https://testmy.net/stats/id-LRN0EJMPV

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...