Jump to content

Help please..New user


emjrc

Recommended Posts

lol..well..i tried both the files in this very long post..and they seemed to slow me down some..here is my ping tests..maybe this will help with which file i need:

Log created by AutoCheck.bat on Mon 05/23/2005

Pinging testmy.net [67.18.179.85] with 32 bytes of data:

Reply from 67.18.179.85: bytes=32 time=79ms TTL=49

Reply from 67.18.179.85: bytes=32 time=51ms TTL=49

Reply from 67.18.179.85: bytes=32 time=51ms TTL=49

Reply from 67.18.179.85: bytes=32 time=52ms TTL=49

Ping statistics for 67.18.179.85:

    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

    Minimum = 51ms, Maximum = 79ms, Average = 58ms

Ping Complete.

Tracing route to testmy.net [67.18.179.85]

over a maximum of 30 hops:

  1    <1 ms    <1 ms    <1 ms  192.168.1.1

  2    9 ms    11 ms    5 ms  10.211.168.1

  3    19 ms    5 ms    9 ms  68.87.153.73

  4    9 ms    7 ms    10 ms  10g-9-4-ar01.woburn.ma.boston.comcast.net [68.87.144.165]

  5    24 ms    8 ms    19 ms  12.125.47.17

  6    20 ms    30 ms    8 ms  gbr2-p10.cb1ma.ip.att.net [12.123.40.190]

  7    24 ms    11 ms    11 ms  tbr2-p012701.cb1ma.ip.att.net [12.122.5.65]

  8    31 ms    33 ms    32 ms  tbr2-cl5.cgcil.ip.att.net [12.122.10.106]

  9    37 ms    40 ms    49 ms  tbr2-cl7.sl9mo.ip.att.net [12.122.10.46]

10    55 ms    56 ms    56 ms  tbr2-cl6.dlstx.ip.att.net [12.122.10.90]

11    51 ms    52 ms    63 ms  gar1-p370.dlrtx.ip.att.net [12.123.196.97]

12    55 ms    89 ms    52 ms  12.119.136.14

13    54 ms    50 ms    50 ms  dist-vlan32.dsr3-1.dllstx3.theplanet.com [70.85.127.61]

14    51 ms    68 ms    72 ms  dist-vlan41.dsr2-1.dllstx4.theplanet.com [70.85.127.83]

15    55 ms    51 ms    51 ms  gig1-0-1.tp-car9-1.dllstx4.theplanet.com [67.18.116.69]

16    69 ms    51 ms    51 ms  85.67-18-179.reverse.theplanet.com [67.18.179.85]

Trace complete.

http://ttester.broadbandreports.com/tweak/block:4b5706f?service=dsl&speed=&os=winNT&via=normal

TCP/Web100 Network Diagnostic Tool v5.3.3d

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 654.31Kb/s

running 10s inbound test (server to client) . . . . . . 4.46Mb/s

Your PC is connected to a Cable/DSL modem

Alarm: Duplex mismatch condition exists: Host set to Full and Switch set to Half duplex

click START to re-test

WEB100 Kernel Variables:

Client: localhost/127.0.0.1

AckPktsIn: 1276

AckPktsOut: 0

BytesRetrans: 0

CongAvoid: 0

CongestionOverCount: 0

CongestionSignals: 0

CountRTT: 1068

CurCwnd: 65700

CurMSS: 1460

CurRTO: 350

CurRwinRcvd: 65535

CurRwinSent: 5840

CurSsthresh: 2147483647

DSACKDups: 0

DataBytesIn: 0

DataBytesOut: 5585960

DataPktsIn: 0

DataPktsOut: 3826

DupAcksIn: 209

ECNEnabled: 0

FastRetran: 0

MaxCwnd: 65700

MaxMSS: 1460

MaxRTO: 370

MaxRTT: 210

MaxRwinRcvd: 65535

MaxRwinSent: 5840

MaxSsthresh: 0

MinMSS: 1460

MinRTO: 300

MinRTT: 90

MinRwinRcvd: 65535

MinRwinSent: 5840

NagleEnabled: 1

OtherReductions: 1

PktsIn: 1277

PktsOut: 3826

PktsRetrans: 0

X_Rcvbuf: 103424

RcvWinScale: 2147483647

SACKEnabled: 3

SACKsRcvd: 1

SendStall: 0

SlowStart: 47

SampleRTT: 120

SmoothedRTT: 120

X_Sndbuf: 103424

SndWinScale: 2147483647

SndLimTimeRwin: 8622038

SndLimTimeCwnd: 1428795

SndLimTimeSender: 2784

SndLimTransRwin: 2

SndLimTransCwnd: 2

SndLimTransSender: 1

SndLimBytesRwin: 5269140

SndLimBytesCwnd: 316820

SndLimBytesSender: 0

SubsequentTimeouts: 0

SumRTT: 114910

Timeouts: 0

TimestampsEnabled: 0

WinScaleRcvd: 2147483647

WinScaleSent: 2147483647

DupAcksOut: 0

StartTimeUsec: 229755

Duration: 10059129

c2sData: 2

c2sAck: 2

s2cData: 9

s2cAck: 3

half_duplex: 0

link: 100

congestion: 0

bad_cable: 0

mismatch: 1

spd: 0.00

bw: 103.53

loss: 0.000001000

avgrtt: 107.59

waitsec: 0.00

timesec: 10.00

order: 0.1638

rwintime: 0.8576

sendtime: 0.0003

cwndtime: 0.1421

rwin: 0.5000

swin: 0.7891

cwin: 0.5013

rttsec: 0.107594

Sndbuf: 103424

aspd: 6.91788

Checking for mismatch on uplink

(speed > 50 [0>50], (xmitspeed < 5) [0.65<5]

(rwintime > .9) [0.85>.9], (loss < .01) [1.0E<.01]

Checking for excessive errors condition

(loss/sec > .15) [1.0E>.15], (cwndtime > .6) [0.14>.6],

(loss < .01) [1.0E<.01], (MaxSsthresh > 0) [0>0]

Checking for 10 Mbps link

(speed < 9.5) [0<9.5], (speed > 3.0) [0>3.0]

(xmitspeed < 9.5) [0.65<9.5] (loss < .01) [1.0E<.01], (mylink > 0) [3.0>0]

Checking for Wireless link

(sendtime = 0) [3.0E=0], (speed < 5) [0<5]

(Estimate > 50 [103.53>50], (Rwintime > 90) [0.85>.90]

(RwinTrans/CwndTrans = 1) [2/2=1], (mylink > 0) [3.0>0]

Checking for DSL/Cable Modem link

(speed < 2) [0<2], (SndLimTransSender = 0) [1=0]

(SendTime = 0) [3.0E-4=0], (mylink > 0) [3.0>0]

Checking for half-duplex condition

(rwintime > .95) [0.85>.95], (RwinTrans/sec > 30) [0.2>30],

(SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10]

Checking for congestion

(cwndtime > .02) [0.14>.02], (mismatch = 0) [1=0]

(MaxSsthresh > 0) [0>0]

estimate = 103.53 based on packet size = 11Kbits, RTT = 107.59msec, and loss = 1.0E-6

The theoretical network limit is 103.53 Mbps

The NDT server has a 101.0 KByte buffer which limits the throughput to 7.33 Mbps

Your PC/Workstation has a 63.0 KByte buffer which limits the throughput to 4.64 Mbps

The network based flow control limits the throughput to 4.65 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet'

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...