hanifv Posted June 9, 2005 CID Share Posted June 9, 2005 Hi, I am from India Can you help me make my internet faster ? Here are the details... - Just formatted my hard disc and installed xp pro and updated to sp2 -got the p2p fix u suggested in the sticky post -i have a 40 kbps connection. i get my internet through a cable wire that goes in my LAN card (Digi-5700 TX) -my download speeds fluctuate between 2.5 kbps to 5 kbps (they remain same throughout the day, even at late night) Here is my download test result.. :::.. Download Stats ..::: Connection is:: 33 Kbps about 0 Mbps (tested with 97 kB) Download Speed is:: 4 kB/s Tested From:: https://testmy.net/ (server2) Test Time:: Thu Jun 9 15:09:34 UTC+0530 2005 Bottom Line:: 1X faster than 56K 1MB download in 256 sec Diagnosis: May need help : running at only 67.35 % of your hosts average (7starnet.com) Validation Link:: https://testmy.net/stats/id-RPNFVTQI5 Here is the tracert test log.... Log created by AutoCheck.bat on Thu 06/09/2005 Pinging testmy.net [67.18.179.85] with 32 bytes of data: Reply from 67.18.179.85: bytes=32 time=330ms TTL=43 Reply from 67.18.179.85: bytes=32 time=328ms TTL=43 Reply from 67.18.179.85: bytes=32 time=327ms TTL=43 Request timed out. Ping statistics for 67.18.179.85: Quote Link to comment Share on other sites More sharing options...
VanBuren Posted June 9, 2005 CID Share Posted June 9, 2005 hey hanifv open cablenut, click delete cablenut tweaks and click save to registry reboot test speed again i think you will have the best overall speed with default settings on that low bandwith VanBuren Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 Thanks Van, The download test that i posted before, would have been at my default settings itself as i had just clean installed xp (without trying any tweaks). I recently changed my ISP. Prevously i had the same advertised speeds of 40 kbps on a different ISP. i got 3 kbps dl speeds then too. But i had succesfully tweaked it to 8 kbps. The thing is i dont know what worked then ,as i had used loads of defferent tweaks and tweaking softwares. Pls just try and increase my download speeds Quote Link to comment Share on other sites More sharing options...
cholla Posted June 10, 2005 CID Share Posted June 10, 2005 hanifv: Run the TCPIP analyzer test here & post the results.Although you use a cable your connection looks like dialup.Do you know which it is? https://www.speedguide.net/ Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 Its not dial up. As i said, i live india , faster speeds are not affordable by the common man . Here is what you asked for TCP options string = 020405b401010402 MTU = 1500 MTU is fully optimized for broadband. MSS = 1460 Maximum useful data in each packet = 1460, which equals MSS. Default Receive Window (RWIN) = 1460 RWIN Scaling (RFC1323) = 0 bits Unscaled Receive Window = 1460 RWIN is a multiple of MSS Other values for RWIN that might work well with your current MTU/MSS: 513920 (MSS x 44 * scale factor of 256960 (MSS x 44 * scale factor of 4) 128480 (MSS x 44 * scale factor of 2) 64240 (MSS x 44) bandwidth * delay product (Note this is not a speed test): Your RcvWindow limits you to: 58.4 kbps (7.3 KBytes/s) @ 200ms Your RcvWindow limits you to: 23.36 kbps (2.92 KBytes/s) @ 500ms Consider increasing your RWIN value to optimize TCP/IP for broadband. MTU Discovery (RFC1191) = ON Time to live left = 117 hops TTL value is ok. Timestamps (RFC1323) = OFF Selective Acknowledgements (RFC2018) = ON IP type of service field (RFC1349) = 00000000 (0) Just hoping you guys can increase my download speeds Quote Link to comment Share on other sites More sharing options...
VanBuren Posted June 10, 2005 CID Share Posted June 10, 2005 try this cablenut file VanBuren Quote Link to comment Share on other sites More sharing options...
cholla Posted June 10, 2005 CID Share Posted June 10, 2005 hanifv: Try Van Burens file I couldn't read it but it will probably give you a different RWIN. The one you now have is too small so run the TCPIP analyzer again after you install Van Burens file. Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 Thanks guys, I tried the file you gave me Van, but i think things got worse Quote Link to comment Share on other sites More sharing options...
VanBuren Posted June 10, 2005 CID Share Posted June 10, 2005 you must be behind a proxy cos your Default Receive Window (RWIN) = 1460 didnt change... or you forgot to click save to registry after applying the cablenut file and reboot pc VanBuren Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 I did click save to registry when i opened the file you gave me, only 2 boxes got filled , GlobalMaxTcpWindowSize : 8760 TCPWindowSize: 8760 the default recieve window was still blank i dont think so i am behind a proxy..how to check that? Quote Link to comment Share on other sites More sharing options...
cholla Posted June 10, 2005 CID Share Posted June 10, 2005 This is the test on my OS notice the difference in the Default Receive Window (RWIN). TCP options string = 020405b40103030101010402 MTU = 1500 MTU is fully optimized for broadband. MSS = 1460 Maximum useful data in each packet = 1460, which equals MSS. Default Receive Window (RWIN) = 128480 RWIN Scaling (RFC1323) = 1 bits (scale factor of 2) Unscaled Receive Window = 64240 RWIN is a multiple of MSS Other values for RWIN that might work well with your current MTU/MSS: 513920 (MSS x 44 * scale factor of 256960 (MSS x 44 * scale factor of 4) 64240 (MSS x 44) bandwidth * delay product (Note this is not a speed test): Your RcvWindow limits you to: 5139.2 kbps (642.4 KBytes/s) @ 200ms Your RcvWindow limits you to: 2055.68 kbps (256.96 KBytes/s) @ 500ms MTU Discovery (RFC1191) = ON Time to live left = 118 hops TTL value is ok. Timestamps (RFC1323) = OFF Selective Acknowledgements (RFC2018) = ON IP type of service field (RFC1349) = 01011100 (92) Precedence (priority) = 010 (immediate) Delay = 1 (low delay) Throughput = 1 (high throughput) Reliability = 1 (high reliability) Cost = 0 (normal cost) Check bit = 0 (correct, 8th checking bit must be zero) DiffServ (RFC 2474) = No valid DiffServ equivalent. See RFCs 2474, 2475, 2597, 2598, 2873. Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 So what do i do now ? once again thanks for your quick replies Quote Link to comment Share on other sites More sharing options...
VanBuren Posted June 10, 2005 CID Share Posted June 10, 2005 I did click save to registry when i opened the file you gave me, only 2 boxes got filled , GlobalMaxTcpWindowSize : 8760 TCPWindowSize: 8760 the default recieve window was still blank i dont think so i am behind a proxy..how to check that? leave the default recieve window blank, thats a AFD parameter and will do more harm then good, on your low bandwidth if your behind a proxy server, the analyzer will not read your PC Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 hey guys i thing i did some mistake because Quote Link to comment Share on other sites More sharing options...
cholla Posted June 10, 2005 CID Share Posted June 10, 2005 hanifv: I would leave the 8760 in GlobalMaxTcpWindowSize : 8760 &TCPWindowSize: 8760 & put 8760 in Default Receive Window (RWIN).Save to registry with Cablenut & reboot.Test it again. I personally like a larger RWIN I would also try this setting & see which one worked the best for you. Put 64240 in a 3 settings in Cablenut save & reboot. Edit Van Buren said to leave the Default Receive Window blank so try it both ways with & without a setting.The speed test will tell you which works best. Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 hey i think u missed my above post i had posted wrong test results earlier my RWIN had indeed changed Quote Link to comment Share on other sites More sharing options...
VanBuren Posted June 10, 2005 CID Share Posted June 10, 2005 try this change the TCP windowsize and globalMaxTcpwindowsize to 8760 - 1460 = 7300 or 7300 - 1460 = 5840 or 5840 - 1460 = 4380 remember to click save to registry after each change and reboot pc ! VanBuren Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 Ok done with 7300.... :::.. Download Stats ..::: Connection is:: 44 Kbps about 0 Mbps (tested with 97 kB) Download Speed is:: 5 kB/s Tested From:: https://testmy.net/ (server1) Test Time:: Fri Jun 10 23:43:26 UTC+0530 2005 Bottom Line:: 1X faster than 56K 1MB download in 204.8 sec Diagnosis: 90% + Okay : running at 93.62 % of your hosts average (7starnet.com) Validation Link:: https://testmy.net/stats/id-X27TIV0JY with 5840.... :::.. Download Stats ..::: Connection is:: 37 Kbps about 0 Mbps (tested with 97 kB) Download Speed is:: 4 kB/s Tested From:: https://testmy.net/ (server1) Test Time:: Fri Jun 10 23:48:47 UTC+0530 2005 Bottom Line:: 1X faster than 56K 1MB download in 256 sec Diagnosis: May need help : running at only 80.43 % of your hosts average (7starnet.com) Validation Link:: https://testmy.net/stats/id-EFY2A0R48 with 4380.... :::.. Download Stats ..::: Connection is:: 44 Kbps about 0 Mbps (tested with 97 kB) Download Speed is:: 5 kB/s Tested From:: https://testmy.net/ (server1) Test Time:: Fri Jun 10 23:56:59 UTC+0530 2005 Bottom Line:: 1X faster than 56K 1MB download in 204.8 sec Diagnosis: 90% + Okay : running at 95.65 % of your hosts average (7starnet.com) Validation Link:: https://testmy.net/stats/id-GB4IT7O9F when i start any downloads, the speeds sometimes are like 20 kbps but then they come down to the usual 3.5-5.5 kbps Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 Following Cholla's suggestion, tried TCP windowsize and globalMaxTcpwindowsize 64240 :::.. Download Stats ..::: Connection is:: 44 Kbps about 0 Mbps (tested with 97 kB) Download Speed is:: 5 kB/s Tested From:: https://testmy.net/ (server1) Test Time:: Sat Jun 11 00:09:56 UTC+0530 2005 Bottom Line:: 1X faster than 56K 1MB download in 204.8 sec Diagnosis: 90% + Okay : running at 95.65 % of your hosts average (7starnet.com) Validation Link:: https://testmy.net/stats/id-8F6TVG4AZ Quote Link to comment Share on other sites More sharing options...
VanBuren Posted June 10, 2005 CID Share Posted June 10, 2005 looks like your maxing out, there is nothing more to do you also live far away from server VanBuren Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 Thanks for all your help Van btw, i just tried TCP/IP optimiser, set it at cable modem optimal settings here is the speed test :::.. Download Stats ..::: Connection is:: 46 Kbps about 0 Mbps (tested with 97 kB) Download Speed is:: 6 kB/s Tested From:: https://testmy.net/ (server1) Test Time:: Sat Jun 11 00:24:30 UTC+0530 2005 Bottom Line:: 1X faster than 56K 1MB download in 170.67 sec Diagnosis: 90% + Okay : running at 100 % of your hosts average (7starnet.com) Validation Link:: https://testmy.net/stats/id-VG4ZYI5A6 the settings included : TCP windowsize and globalMaxTcpwindowsize set at 256960 and also quite a few other changes i really hope it could touch 8 kbps atleast Quote Link to comment Share on other sites More sharing options...
cholla Posted June 10, 2005 CID Share Posted June 10, 2005 hanifv : try the speedguide TCPIP analyzer test again I don't think it will show that as your RWIN.& sometimes TCPIP optimiser & Cablenut conflict. So try the test & see. Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 here is the tcp/ip test after using the optimizer.... TCP options string = 020405b40103030201010402 MTU = 1500 MTU is fully optimized for broadband. MSS = 1460 Maximum useful data in each packet = 1460, which equals MSS. Default Receive Window (RWIN) = 256960 RWIN Scaling (RFC1323) = 2 bits (scale factor of 4) Unscaled Receive Window = 64240 RWIN is a multiple of MSS Other values for RWIN that might work well with your current MTU/MSS: 513920 (MSS x 44 * scale factor of 128480 (MSS x 44 * scale factor of 2) 64240 (MSS x 44) bandwidth * delay product (Note this is not a speed test): Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms MTU Discovery (RFC1191) = ON Time to live left = 53 hops TTL value is ok. Timestamps (RFC1323) = OFF Selective Acknowledgements (RFC2018) = ON IP type of service field (RFC1349) = 00000000 (0) Quote Link to comment Share on other sites More sharing options...
cholla Posted June 10, 2005 CID Share Posted June 10, 2005 hanifv: That should work aparently you have window scaling enabled.With your connection I doubt if it will ever exceed the unscaled RWIN which is 64240 .It would only use the next scale if you received a page larger than 64240.The only thing I would do is try a larger test at testmy.net like the medium test.If you are going to use TCPIP optimizer you might try deleting the Cablenut settings by leaving all the Cablenut settings blank & saving to registry then reboot & test.That should eliminate conflict with TCPIP optimizer if there is any.If this causes a slowdown put the cablenut settings back in. Quote Link to comment Share on other sites More sharing options...
hanifv Posted June 10, 2005 Author CID Share Posted June 10, 2005 i deleted cablenut settings prior to trying the optimiser the 6 kbps result i got was on a medium test But still i cudnt get my dl speeds to 8 so far Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.