Jump to content

Best speed ever :D


speedcrazed

Recommended Posts

:::.. Download Stats ..:::

Connection is:: 17033 Kbps about 17 Mbps (tested with 12160 kB)

Download Speed is:: 2079 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Fri Aug 5 18:22:43 EDT 2005

Bottom Line:: 304X faster than 56K 1MB download in 0.49 sec

Diagnosis: Awesome! 20% + : 602.97 % faster than the average for host (rogers.com)

Validation Link:: https://testmy.net/stats/id-I9438OWHQ

Upgrading more soon =)

Link to comment
Share on other sites

:::.. Download Stats ..:::

Connection is:: 17063 Kbps about 17.1 Mbps (tested with 12160 kB)

Download Speed is:: 2083 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Fri Aug 5 18:31:18 EDT 2005

Bottom Line:: 305X faster than 56K 1MB download in 0.49 sec

Diagnosis: Awesome! 20% + : 602.47 % faster than the average for host (rogers.com)

Validation Link:: https://testmy.net/stats/id-3WC45XDSE

this is a bit faster than the first :lol:

Link to comment
Share on other sites

hey speedcrazed and welcome to the forum :)

since there is a possibility that the test is cached, run these aswell and provide some screenshots  ;)

http://miranda.ctd.anl.gov:7123/

http://nitro.ucsc.edu/

http://speedtest.cogeco.net/

VanBuren :)

well i went to the first speed test link and everything looks pretty good but there is one issue i'm trying to address but i cant seem to find the setting in my router (WRT54G) wireless Linksys router

here is the result i keep getting

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 857.15Kb/s

running 10s inbound test (server to client) . . . . . . 5.03Mb/s

Your PC is connected to a Cable/DSL modem

Alarm: Duplex mismatch condition exists: Host set to Full and Switch set to Half duplex

how can i resolve the issue with my duplex? any ideas?

Thanks

Chris

Link to comment
Share on other sites

well i went to the first speed test link and everything looks pretty good but there is one issue i'm trying to address but i cant seem to find the setting in my router (WRT54G) wireless Linksys router

here is the result i keep getting

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 857.15kB/s

running 10s inbound test (server to client) . . . . . . 5.03Mb/s

Your PC is connected to a Cable/DSL modem

Alarm: Duplex mismatch condition exists: Host set to Full and Switch set to Half duplex

how can i resolve the issue with my duplex? any ideas?

Thanks

Chris

start>control panel>Network and Internet connections (only visible in Category view)>Network Connections>Local Area Connection>Right Click...Properties>Configure>Advanced tab>Go down to "Link Speed/Duplex Mode">on the right, select 1 of the 'Full mode' either 10 or 100. 100 is best.

try it!

Link to comment
Share on other sites

that test is wrong and i posted it a while back but if you mess with the settings the speeds will be accurate here still and there is goes all over.  i had that test say i had 10 mb upload  and i have 768 but i havent seen anyone else see this happen yet or test it but i know it works for me

Link to comment
Share on other sites

i've been playing with all of the different duplex's it seems to make no difference but as soon as i remove the router from the mix the duplex error disapears. so something onboard the router has a setting although i've looked all over for it I can't seem to find it. any ideas about the router..?

Ciao

Chris

Link to comment
Share on other sites

Not bad :)

2005-08-09 02:38:02 EST: 5510 / 362

Your download speed : 5643005 bps, or 5510 Kbps.

A 688.8 kB/sec transfer rate.

Your upload speed : 371057 bps, or 362 Kbps

yea its a great test, atleast for downstream hehe

2005-08-09 05:08:39 EST: 29398 / 1410

Your download speed : 30103643 bps, or 29398 kbps.

A 3674.7 KB/sec transfer rate.

Your upload speed : 1443869 bps, or 1410 kbps.

also i agree with you Blunted, those NDT tests can be inaccurate for upload. I think it has to do with the large buffers they using. For fat fiber optics they are very accurate, the most accurate on the planet if you ask me.

look at my network graph and compare it to the score

VanBuren :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...