Jump to content

Very slow connection =[


lilwill

Recommended Posts

:::.. Download Stats ..:::

Connection is:: 10485 Kbps about 10.5 Mbps (tested with 12160 kB)

Download Speed is:: 1280 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Sun Sep 4 03:58:28 EDT 2005

Bottom Line:: 187X faster than 56K 1MB download in 0.8 sec

Diagnosis: Awesome! 20% + : 141.48 % faster than the average for host (verizon.net)

Validation Link:: https://testmy.net/stats/id-X8AMR9W3V

:::.. Upload Stats ..:::

Connection is:: 1815 Kbps about 1.8 Mbps (tested with 1496 kB)

Upload Speed is:: 222 kB/s

Tested From:: https://testmy.net/ (server1)

Test Time:: Sun Sep 4 03:58:57 EDT 2005

Bottom Line:: 32X faster than 56K 1MB upload in 4.61 sec

Diagnosis: Awesome! 20% + : 198.52 % faster than the average for host (verizon.net)

Validation Link:: https://testmy.net/stats/id-R2BDALS3Y

the upload speed is fine

but the download speed sucks

i got the 15/2 deal

i might be that its 4am or something else

i tryed the tweaks also

Link to comment
Share on other sites

lilwill, where are you located?  I'm curious as to your proximity to the testmy.net server which is near downtown Dallas.  Here is my download from that server which is just a few miles from my house in Flower Mound, TX.

Testmy.net:

:::.. Download Stats ..:::

Connection is:: 15665 Kbps about 15.7 Mbps (tested with 12160 kB)

Download Speed is:: 1912 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Mon Sep 05 2005 11:03:31 GMT-0500 (Central Daylight Time)

Bottom Line:: 280X faster than 56K 1MB download in 0.54 sec

Diagnosis: Looks Great : 0.73 % faster than the average for host (14.63)

Validation Link:: https://testmy.net/stats/id-O475LPDZ2

However, when I test from a server that is much farther away I get a significant drop in speed.  This server , for example, is in Virginia.  Due to some slow downs along the way I loose about 5Mbps in download speed. 

TCP/Web100 Network Diagnostic Tool v5.2.0f

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 2.10Mb/s

running 10s inbound test (server to client) . . . . . . 10.83Mb/s

The slowest link in the end-to-end path is a 10 Mbps Ethernet subnet

You need to have a server that is in close proximity to your location in order to have a benchmark.  I have three local servers that I use as my benchmark.  As long as I'm getting my full speed from those servers then I'm happy.  Since Verizon can't control what goes on outside their system I don't raise a stink unless my benchmark servers are showing significant dropoff.

Let me know where you are and I'll point you to some servers that are close by.

Link to comment
Share on other sites

ohh sorry about the lack of information

ok here it goes i tryed the cablenut settings i haven't tryed any other program

and i am using the verizon wired router the di-604

and i am located in syosset long island new york

thank in advance for the help guys

if you need any other information just ask =]

Link to comment
Share on other sites

TCP/Web100 Network Diagnostic Tool v5.3.3a

click START to begin

Another client is currently being served, your test will begin within 45 seconds

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 1.82Mb/s

running 10s inbound test (server to client) . . . . . . 14.74Mb/s

The slowest link in the end-to-end path is a 10 Mbps Ethernet subnet

click START to re-test

so im guessing my connection isn't very slow at all? =]

Link to comment
Share on other sites

TCP/Web100 Network Diagnostic Tool v5.3.3a

click START to begin

Another client is currently being served, your test will begin within 45 seconds

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 1.82Mb/s

running 10s inbound test (server to client) . . . . . . 14.74Mb/s

The slowest link in the end-to-end path is a 10 Mbps Ethernet subnet

click START to re-test

so im guessing my connection isn't very slow at all? =]

Not even close ;)

ever used dialup?

Link to comment
Share on other sites

TCP/Web100 Network Diagnostic Tool v5.3.3a

click START to begin

Another client is currently being served, your test will begin within 45 seconds

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 1.82Mb/s

running 10s inbound test (server to client) . . . . . . 14.74Mb/s

The slowest link in the end-to-end path is a 10 Mbps Ethernet subnet

click START to re-test

so im guessing my connection isn't very slow at all? =]

I'd say that looks about right.  You could probably improve that upload score with some cablenut adjustments but the download looks pretty good.

Link to comment
Share on other sites

best way i can describe bandwith on a normal connection is it act much like a seesaw

if your DL and UL are idle and your just sitting there then it will be level and your testing should come back fine.

If your getting better download speed ie 15.2-15.5 then your upload will suffer and vice versa now this is not the standard way of thinking but its the easiest and most undertood method for explaining the way bandwith works in most cases for services like cable and verizon's fios.

Hope that helps on explaining if it didnt oh well i tried and im vored so BLAH! LOL

:D

but yea ur speed DL wise looks fine try re-testing a few times at different times and if it doesn't improve then try those cablenut settings unfortunately they can garantee 2Mbps on UP TO 2Mbps

:(

Any more questions or just wanna know more lemme know i'm happpy to help.

Link to comment
Share on other sites

Well I'm having a similar problem.  I have used CableNut and a Fiber 15/2 profile.  My download comes in between 7 and 12mbps. It's not slow, but I should be getting more. 

I tried the Rochester one linked above and got 11/2.05 and then the site stopped working

Speakeasy NYC

Download Speed: 12400 kbps (1550 KB/sec transfer rate)

Upload Speed: 1757 kbps (219.6 KB/sec transfer rate)

From this site I'm getting a very bad results.

:::.. Download Stats ..:::

Connection is:: 6112 Kbps about 6.1 Mbps (tested with 12160 kB)

Download Speed is:: 746 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Sun Sep 11 2005 12:33:15 GMT-0400 (Eastern Daylight Time)

Bottom Line:: 109X faster than 56K 1MB download in 1.37 sec

Diagnosis: Awesome! 20% + : 42.07 % faster than the average for host (verizon.net)

Validation Link:: https://testmy.net/stats/id-1UTIDBGXQ

I'm also in NY.

Link to comment
Share on other sites

Oh and also this is going through  Belkin Pre-N Wireless Router and to a computer with a Belkin Wireless Pre-N card in it.

I have never gotton good results from testmy. net, Speakeasy or the dslreports speed tests. However, I do get good results from the more "approved" high speed sites. Try the following sites:

http://jlab4.jlab.org:7123/  (this site also lists other similar type sites on its page)

http://speedtest.tx.charter.com/

The above sites consistently give me around 14.8-15.2/1.9-2.02 speeds (I also used cablenut to tweak my settings). I can also verify these speeds by monitoring the traffic with NetPerSec. These results are with the Dlink wired router replaced with a Belkin 7230-4 wireless g router. I get the same results from my wired desktop and my wireless laptop (using the Belkin 7010 wireless g card.

Harvey

Link to comment
Share on other sites

First one jlab

TCP/Web100 Network Diagnostic Tool v5.2.0f

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 2.04Mb/s

running 10s inbound test (server to client) . . . . . . 13.06Mb/s

The slowest link in the end-to-end path is a 10 Mbps Ethernet subnet

Information: Other network traffic is congesting the link

click START to re-test

http://speedtest.umflint.edu/

TCP/Web100 Network Diagnostic Tool v5.2.0f

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 2.01Mb/s

running 10s inbound test (server to client) . . . . . . 12.74Mb/s

The slowest link in the end-to-end path is a 10 Mbps Ethernet subnet

Information: Other network traffic is congesting the link

click START to re-test

I was just at someone elses house who also has 15/2 Fios and nyc.speakeasy.net get them over 15mbps while it is still giving me around 12mbps.

Link to comment
Share on other sites

Run the tests several times. I also sometimes get lower numbers like yours. Also try the the Charter site - it seems to be the only one that identifies the link as  a 100mb/s instead of 10 mb/s link.

If you can, send yourself a large file and monitor the upload and download speed with a utility such as NetPerSec. Also, try the speed test at the OOL site:

http://www.dslreports.com/forum/ool, NetPerSec shows a download speed of around 15 -16 mb/s.

Harvey

Link to comment
Share on other sites

Well nevermind I'm upgrading to 30/5 for $55 a month.  I don't know what's going on though since so far only my upload has increased.

From the Charter one

TCP/Web100 Network Configuration Tester v5.1.1

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 4.63Mb/s

running 10s inbound test (server to client) . . . . . . 12.78Mb/s

Unknown link type discovered!

Information: Other network traffic is congesting the link

click START to re-test

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 4.60Mb/s

running 10s inbound test (server to client) . . . . . . 12.44Mb/s

You are connected to a 100 Mbps Full-Duplex link

Information: Other network traffic is congesting the link

click START to re-test

Link to comment
Share on other sites

Any chance that your laptop is located far enough away from the router so as to get reduced speeds (ie., <15 mb/s)?

BTW, what pc card controller does your laptop use? I'm thinking of getting the pre-n setup, but there is an issue with the Belkin pre-n pc card and O2Micro pc card controllers.

Harvey

[EDIT}

Other possibilities:

1. Zone Alarm 5.x and above are known to cause speed issues - if you use it, try uninstalling.

2. I use Avast as my AV software - there is an issue with the Standard Shield and IE. If you use Avast, try disabling it while you speed test.

3. Other AV products may cause an issue.

Harvey

Link to comment
Share on other sites

Basically the NDT web 100 test.Here are the results on my 56K dial-up modem.Its the first time one of these showed my speed in Mb/s.I have a link for several NDT tests

http://e2epi.internet2.edu/ndt/ndt-server-list.html

TCP/Web100 Network Diagnostic Tool v5.2.0f

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .

Link to comment
Share on other sites

Any chance that your laptop is located far enough away from the router so as to get reduced speeds (ie., <15 mb/s)?

BTW, what pc card controller does your laptop use? I'm thinking of getting the pre-n setup, but there is an issue with the Belkin pre-n pc card and O2Micro pc card controllers.

Harvey

[EDIT}

Other possibilities:

1. Zone Alarm 5.x and above are known to cause speed issues - if you use it, try uninstalling.

2. I use Avast as my AV software - there is an issue with the Standard Shield and IE. If you use Avast, try disabling it while you speed test.

3. Other AV products may cause an issue.

Harvey

Actually I'm using the Belkin Wireless Pre-N Desktop Card.  And the router is sitting basically right next to the computer.  I don't think I have anything running that could slow it down, especially since I get the same speeds from my other computers also.  I do have Symantec Norton Antivirus Corporate, Steam, Trillian, BWMeter, Google Desktop 2, Xfire, Ultr@ VNC Server, and Orb running.

And I get around the same results with Norton Antivirus off.

Link to comment
Share on other sites

Actually I'm using the Belkin Wireless Pre-N Desktop Card.  And the router is sitting basically right next to the computer.  I don't think I have anything running that could slow it down, especially since I get the same speeds from my other computers also.  I do have Symantec Norton Antivirus Corporate, Steam, Trillian, BWMeter, Google Desktop 2, Xfire, Ultr@ VNC Server, and Orb running.

And I get around the same results with Norton Antivirus off.

From what I have read, the Pre-N routers have diminished speeds (apparently due to near-field effects) for wireless clients which are less then 10 feet away. Am I correct in assuming that you get good speeds for wired clients and that all your wireless clients are within 10 feet of the router?

If so, is there any way for you to temporarily relocate the router so as to increase the distance and then retry the speed tests?

Harvey

Link to comment
Share on other sites

Well my laptop over ethernet gets around 16/3  and my wireless desktop gets around 13/5 every time.  :?:

Well, I guess I'm out of ideas for now. You might try posting in the Belkin Forum at dslreports.com. - there's a lot of people with experience with the Belkin pre-n stuff.

Harvey

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...