Swimmer Posted December 7, 2003 CID Share Posted December 7, 2003 I have a nother question. I was visiting dslreports to do a tweak test. The only problem with my connection that they found was my Rwin value(256960) It told me to Choose RWIN between 14600 and 37960. I am on comcast 1.5/256 cable. Any ideas if i should change this or leave it alone. I am on a dlink Di-614+ router using cat 5 to this computer. Example 146000 byte download Actual data bytes sent: 146000 Actual data packets: 100 Max packet sent (MTU): 1500 Max packet recd (MTU): 1500 Retransmitted data packets: 0 sacks you sent: 0 pushed data pkts: 2 data transmit time: 0.277 secs our max idletime: 76.8 ms transfer rate: 252175 bytes/sec transfer rate: 2017 kbits/sec This is not a speed test! transfer efficiency: 100% Your Tweakable Settings: Receive Window (RWIN): 256960 Window Scaling: 2 Path MTU Discovery: ON RFC1323 Window Scaling: ON RFC1323 Time Stamping: OFF Selective Acks: ON MSS requested: 1460 TTL: (less any hops behind firewall) 64 TTL remaining: 53 ICMP (ping) check Minimum ping: 30 ms Maximum ping: 32 ms Ping stability: 31 30 30 31 30 31 30 31 30 32 Link to comment Share on other sites More sharing options...
CA3LE Posted December 7, 2003 CID Share Posted December 7, 2003 my RWIN is set to 256960 also... and I am running full throttle ~~ if you are getting a little lower or above your advertised speed... leave it alone Link to comment Share on other sites More sharing options...
MICROWAVE Posted December 8, 2003 CID Share Posted December 8, 2003 I think they put up the other numbers for fun kinda like throwing at the dart board. I guess their suggestions may help some people! microwave Link to comment Share on other sites More sharing options...
Recommended Posts