Jump to content

Help with my Speed Please


d1nonly
 Share

Recommended Posts

Welcome to the forum d1nonly

I'm not the best on faster connections but I can probably get you started.First you dont have to post the results but the site below is better for the NDT test .The nitro one always shows packet loss.etc.It didn't use to have that problem.

http://speedtest.umflint.edu/

The Cablenut shows the 2000 on its XP manual tweak screen this is normal.I would try a larger rwin.You have to enable window scaling for a rwin above 65535 that is what Tcp1323Opts

Link to post
Share on other sites

Cholla, thanks a lot for taking the time

Ok, something is working here.  My upload got about 15-20 percent faster (it still varies) and my download is now at 90+ percent.  Still trying to figure out how to get the screenshot of my cablenut settings in my post.  Most of the areas are blank...(except for the ones you told me to fill in and a few others)

Will now try it with the other settings you provided.

:::.. Upload Stats ..:::

Connection is:: 275 Kbps about 0.3 Mbps (tested with 579 kB)

Upload Speed is:: 34 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Sat Oct 22 12:47:58 EDT 2005

Bottom Line:: 5X faster than 56K 1MB upload in 30.12 sec

Diagnosis: May need help : running at only 52.78 % of your hosts average (cox.net)

Validation Link:: https://testmy.net/stats/id-B35Y2E1MC

:::.. Download Stats ..:::

Connection is:: 3364 Kbps about 3.4 Mbps (tested with 12160 kB)

Download Speed is:: 411 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Sat Oct 22 12:54:13 EDT 2005

Bottom Line:: 60X faster than 56K 1MB download in 2.49 sec

Diagnosis: 90% + Okay : running at 91.79 % of your hosts average (cox.net)

Validation Link:: https://testmy.net/stats/id-8J2YXLUMS

I also ran the test you recommended:

http://speedtest.umflint.edu/

but am not sure if you need me to post the results, but here are the basics

Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Half Duplex mode

No network congestion discovered.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 125.27 msec; the Packet size = 1460 Bytes; and

No packet loss was observed.

This connection is receiver limited 93.73% of the time.

  Increasing the current receive buffer (62.0 KB) will improve performance

This connection is network limited 6.23% of the time.

    Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: OFF

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Information: Network Address Translation (NAT) box is modifying the Client's IP address

Server says [68.10.226.118] but Client says [192.168.0.101]

D1nonly

Link to post
Share on other sites

Here are the basics on doing a screen shot .

1. Bring up the window you want a screen shot of( In this case Cablenut  manual tweak screen)

2. press the Print Screen/Sys Rq. key if this is not exactly the key on your keyboard it should be simular.

3.Select paint ( Should be here StartProgramsAccessoriesPaint)

4.Once the Paint window is up L.click in the white window screen,Go to the edit drop down & select paste.This should have the screen shot in the paint window.

5.In the file drop down select save as ; in the save as window select save inMY Pictures

  Save as type:  .jpg or .jpeg is what I use if your OS only has .bmp as a choice then save as .bmp

  With a .bmp you will have to convert it to .jpg to post it.Hopefully your OS will not need to do this.

  Mine does I have a freeware program called Ifranveiw that I use.

6. Then when you post just select Additional Options & Browse to the screen shot in My Pictures & click it.

  it should show in the Browse window .(just the text about the screen shot) then when you save the post it will have the screen shot in it.

If you need Ifran veiw it is easy to find on the web to DL & pretty east to use .I will give you some instruction on it if you have to use it .

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...