Jump to content

Really REALLY need ANYONES advice!


Dommy

Recommended Posts

I'm connecting at 2.3mbps and my dl speed is as follows (Upload is over my normal)

:::.. Download Stats ..:::

Connection is:: 202 Kbps about 0.2 Mbps (tested with 1013 kB)

Download Speed is:: 25 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Tue Nov 1 20:20:06 UTC 2005

Bottom Line:: 4X faster than 56K 1MB download in 40.96 sec

Diagnosis: May need help : running at only 20.8 % of your hosts average (as9105.com)

Validation Link:: https://testmy.net/stats/id-PQMF064EY

My advertised is 2mbps and i'm connecting through a NetGear router... I've tried my hardest to get this to it's advertised speed but nothing I do works = THanks for your help if you help me!

Link to comment
Share on other sites

k. first, read the 2 links in my sig then post all the info asked for if possible, otherwise it's kinda hard to help.

Receive Window (RWIN):  256960

Window Scaling:  2

Path MTU Discovery:  ON

RFC1323 Window Scaling:  ON

RFC1323 Time Stamping:  OFF

Selective Acks:  ON

MSS requested:  1452

TTL:  unknown

TTL remaining:  56

TOS/TOS subfield:  0

TOS/Flags: 

2. Test 1024001 byte download

Actual data bytes sent: 1076273

Actual data packets: 743

Max packet sent (MTU): 1492

Max packet recd (MTU): 1492

Retransmitted data packets: 36

sacks you sent: 149

pushed data pkts: 88

data transmit time: 53.689 secs

our max idletime: 3785.9 ms

transfer rate: 17686 bytes/sec

transfer rate: 141 kbits/sec

This is not a speed test!

transfer efficiency: 95%

WEB100 Kernel Variables:

Client: localhost/127.0.0.1

AckPktsIn: 136

AckPktsOut: 0

BytesRetrans: 5808

CongAvoid: 78

CongestionOverCount: 0

CongestionSignals: 4

CountRTT: 94

CurCwnd: 7260

CurMSS: 1452

CurRTO: 710

CurRwinRcvd: 256960

CurRwinSent: 16304

CurSsthresh: 5808

DSACKDups: 0

DataBytesIn: 0

DataBytesOut: 323796

DataPktsIn: 0

DataPktsOut: 223

DupAcksIn: 38

ECNEnabled: 0

FastRetran: 4

MaxCwnd: 15972

MaxMSS: 1452

MaxRTO: 950

MaxRTT: 490

MaxRwinRcvd: 256960

MaxRwinSent: 16304

MaxSsthresh: 7260

MinMSS: 1452

MinRTO: 560

MinRTT: 290

MinRwinRcvd: 64240

MinRwinSent: 16304

NagleEnabled: 1

OtherReductions: 0

PktsIn: 136

PktsOut: 223

PktsRetrans: 4

X_Rcvbuf: 103424

RcvWinScale: 7

SACKEnabled: 3

SACKsRcvd: 41

SendStall: 0

SlowStart: 13

SampleRTT: 310

SmoothedRTT: 360

X_Sndbuf: 103424

SndWinScale: 2

SndLimTimeRwin: 0

SndLimTimeCwnd: 11036176

SndLimTimeSender: 2611

SndLimTransRwin: 0

SndLimTransCwnd: 1

SndLimTransSender: 1

SndLimBytesRwin: 0

SndLimBytesCwnd: 323796

SndLimBytesSender: 0

SubsequentTimeouts: 0

SumRTT: 32660

Timeouts: 0

TimestampsEnabled: 0

WinScaleRcvd: 2

WinScaleSent: 7

DupAcksOut: 0

StartTimeUsec: 553850

Duration: 11041605

c2sData: 2

c2sAck: 2

s2cData: 9

s2cAck: 2

half_duplex: 0

link: 100

congestion: 1

bad_cable: 0

mismatch: 0

spd: 0.00

bw: 0.24

loss: 0.017937220

avgrtt: 347.45

waitsec: 0.00

timesec: 11.00

order: 0.2794

rwintime: 0.0000

sendtime: 0.0002

cwndtime: 0.9998

rwin: 1.9604

swin: 64.0000

cwin: 0.1219

rttsec: 0.347447

Sndbuf: 8388608

aspd: 1.17828

Checking for mismatch on uplink

(speed > 50 [0>50], (xmitspeed < 5) [0.53<5]

(rwintime > .9) [0>.9], (loss < .01) [0.01<.01]

Checking for excessive errors condition

(loss/sec > .15) [0.00>.15], (cwndtime > .6) [0.99>.6],

(loss < .01) [0.01<.01], (MaxSsthresh > 0) [7260>0]

Checking for 10 Mbps link

(speed < 9.5) [0<9.5], (speed > 3.0) [0>3.0]

(xmitspeed < 9.5) [0.53<9.5] (loss < .01) [0.01<.01], (mylink > 0) [3.0>0]

Checking for Wireless link

(sendtime = 0) [2.0E=0], (speed < 5) [0<5]

(Estimate > 50 [0.24>50], (Rwintime > 90) [0>.90]

(RwinTrans/CwndTrans = 1) [0/1=1], (mylink > 0) [3.0>0]

Checking for DSL/Cable Modem link

(speed < 2) [0<2], (SndLimTransSender = 0) [1=0]

(SendTime = 0) [2.0E-4=0], (mylink > 0) [3.0>0]

Checking for half-duplex condition

(rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30],

(SenderTrans/sec > 30) [0.09>30], OR (mylink <= 10) [3.0<=10]

Checking for congestion

(cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0]

(MaxSsthresh > 0) [7260>0]

estimate = 0.24 based on packet size = 11Kbits, RTT = 347.45msec, and loss = 0.01793722

The theoretical network limit is 0.24 Mbps

The NDT server has a 8192.0 KByte buffer which limits the throughput to 184.20 Mbps

Your PC/Workstation has a 250.0 KByte buffer which limits the throughput to 5.64 Mbps

The network based flow control limits the throughput to 0.35 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'T1'

That ok?

Link to comment
Share on other sites

Messed about with settings :)

:::.. Download Stats ..:::

Connection is:: 1896 Kbps about 1.9 Mbps (tested with 12160 kB)

Download Speed is:: 231 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Wed Nov 2 08:12:09 UTC 2005

Bottom Line:: 34X faster than 56K 1MB download in 4.43 sec

Diagnosis: Awesome! 20% + : 95.87 % faster than the average for host (as9105.com)

Validation Link:: https://testmy.net/stats/id-6WOLH1M5Q

A Bit better :D

Link to comment
Share on other sites

i had a similar problem where with use of most bandwidth of the internet line, my router would just stop working.. i changed the cable that connects the modem to the router and for a couple of days, my internet is fine (no disconnections).. since your internet speed drops and comes back up, maybe its something with the hardware or cables.. have u tried leaving the router off for a couple of hours and then seeing what the speeds are? :D

Link to comment
Share on other sites

i had a similar problem where with use of most bandwidth of the internet line, my router would just stop working.. i changed the cable that connects the modem to the router and for a couple of days, my internet is fine (no disconnections).. since your internet speed drops and comes back up, maybe its something with the hardware or cables.. have u tried leaving the router off for a couple of hours and then seeing what the speeds are? :D

Tryed that now, did nothing at all.. I'm so confused! :(
Link to comment
Share on other sites

k. first, read the 2 links in my sig then post all the info asked for if possible, otherwise it's kinda hard to help.

hey resop...this has nothing to do with this subject...but did u know that it's really hard to tell that there are two links in ur sig...the emerald green highlite kinda overtakes the blue text...maybe use different colors and maybe add some text to tell folks what the links r for...just a thought... :)

Link to comment
Share on other sites

hey resop...this has nothing to do with this subject...but did u know that it's really hard to tell that there are two links in ur sig...the emerald green highlite kinda overtakes the blue text...maybe use different colors and maybe add some text to tell folks what the links r for...just a thought... :)

Yeah.. they don't look like links :)
Link to comment
Share on other sites

hey resop...this has nothing to do with this subject...but did u know that it's really hard to tell that there are two links in ur sig...the emerald green highlite kinda overtakes the blue text...maybe use different colors and maybe add some text to tell folks what the links r for...just a thought... :)

nag nag nag.

happy now?

:twisted:

Link to comment
Share on other sites

lol. not you.; the person i quoted.

anywho. if you connect to the modem w/o the router, does the speed stay stable?

I've found out what the matter is, the ISP has a Fair Usage Policy and apparently I fall into the 'over usage' and I share bandwith with other people during peak!!!!!
Link to comment
Share on other sites

Also, just so you know, the glow tag does not display right for us Firefox users.

well cry me a river. like i care if the users of some third party cobbled together by a bunch of people that microsoft didn't want working for them so they decided they were so cool and would write their own stuff and give it away for free browser can't see it right. it's not like windows doesn't come with a perfectly fine and free browser right out of the box.

:evil6: :evil6: :evil6: :evil6: :evil6: :evil6: :evil6: :evil6:

:twisted:

Link to comment
Share on other sites

well cry me a river. like i care if the users of some third party cobbled together by a bunch of people that microsoft didn't want working for them so they decided they were so cool and would write their own stuff and give it away for free browser can't see it right. it's not like windows doesn't come with a perfectly fine and free browser right out of the box.

:evil6: :evil6: :evil6: :evil6: :evil6: :evil6: :evil6: :evil6:

:twisted:

no comment ... lol .. :D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...