Scroto

Your connection is: 6028 Kbps or 6 Mbps You Downloaded at: 736 kB/s You are running: 108 times faster than 56K and can Download 1 megabyte in 1.39 second(s) Member Ident: CompID: Test Time:: 2006/03/23 - 9:21pm Test Browser and OS info: ScrotoVision Version 900xxx Test ID: EP6G03OV2 (if this is a screenshot go to testmy.net to see if this is fake) Diagnosis ^info^: Awesome! 20% + : 154.13 % faster than the average for host (qwest.net) Your connection is: 614 Kbps or 0.6 Mbps You Uploaded at: 75 kB/s You are running: 11 times faster than 56K and can Upload 1 megabyte in 13.65 second(s) Member Ident: Username:Scroto CompID: Test Time:: 2006/03/23 - 8:25pm Test Browser and OS info: ScrotoVision Version 900xxx Test ID: R4QSFT9XE (if this is a screenshot go to testmy.net to see if this is fake) Diagnosis ^info^: Awesome! 20% + : 27.92 % faster than the average for host (qwest.net)

Thats what I was thinking also, at least it works now though lol

Replacement board fixed the problem....weird if you ask me, i would have almost bet money that it was the powersupply...

Replaced the supply, same thing...so a new motherboard is on the way! Dohh

done before I posted the poll lol, tried with processor out, tried with the old celery processor also

Thanks, I'll check into the switch here in a bit...will post back results either way

Checked all the memory sticks, cpu, ect.. Forgot to add this to the first post too. I also did clear cmos. This board requires the battery to be removed and a jumper set. But alas, same same same..... I wish I had a supply to swap out for a test. I have an ATX spare(24 pin), but this one is a Micro ATX (20 pin) I think what I'm going to do is just go out and buy a new supply. If its not the supply, at least then I will have a spare lol

done, done, done and done...first thing i thought of..although, I will have to check on said fuse, will post back tomarrow after looking! Thanks for the reply!

lol yeah, this one has been good to me so far..would like to keep it as a back up

As stated in my first post, only the fans spin when the power cord is removed and reinserted. (some system check thing i guess) Nothing at all happens when the power button is pushed, it dont post, no boot, no led lights...nothing.

1) Go to school 2) Pay me to teach you 3) Go Here

Ok, here is the story! Woke up, turned the machine on, checked emails, phone rang. So i got up to answer it quick, pushed in my chair, the chair bumped the front of the tower slightly. The machine just shut down like the power plug was pulled out. I didnt think much of it at the time because i figured that i had bumped the power button on the front and it shut down.. So i come back a few minutes later and try to turn the machine on and nothing at all happens ( like its unplugged ) wont boot to bios or anything. First I thought powersupply went booooom, but then after chatting with a tech friend, he had me pull the cover and watch the fans while removing the power cord and reinstalling it...he said to watch to see if the fans spin, which they did for about 1 second. So he tells me that means the power supply is working and most likely my mobo bios is wasted. PSU could still be fried and have enough to spin the fan. Also, no, the fans dont spin or LED lights of any kind when the power button is pushed. Second opinions wanted cuz i dont wanna waste $$$ on a mobo and then have it be the psu! Only upgrades to the unit are... memory, pentium 4 processor and heat sink, Replacement hard drive, dvd writer..otherwise its bone stock.. The unit is an emachine model T2792 Motherboard is ImperialGV manufactured by TriGem International Form Factor: Micro ATX CPU Socket/Slot Type: mPGA478 Chipset: Intel 845GV RAM Type: DDR PC2700 DIMM Number of RAM Slots: 2 Total RAM Capacity: 2048 MB RAM Stick Size Limit: 1024 MB Front Side Bus Speed: 400/533 MHz PCI Slots: 3 EIDE Headers: 2 Onboard Video: Intel Extreme Graphics 3D 845GV AGP Onboard Audio: RealTek ALC650 (AC 97 2.2)

Just wondering if your download is still like that?

Denver, CO Qwest - 7168 / 896 :::.. Download Stats ..::: Connection is:: 6112 Kbps about 6.1 Mbps (tested with 12160 kB) Download Speed is:: 746 kB/s Tested From:: https://testmy.net/ (server2) Test Time:: Fri Oct 21 2005 21:05:11 GMT-0600 (Mountain Daylight Time) Bottom Line:: 109X faster than 56K 1MB download in 1.37 sec Diagnosis: Awesome! 20% + : 152.25 % faster than the average for host (qwest.net) Validation Link:: https://testmy.net/stats/id-2WK5QDZ7N :::.. Upload Stats ..::: Connection is:: 619 Kbps about 0.6 Mbps (tested with 2992 kB) Upload Speed is:: 76 kB/s Tested From:: https://testmy.net/ (server1) Test Time:: Fri Oct 21 2005 21:06:19 GMT-0600 (Mountain Daylight Time) Bottom Line:: 11X faster than 56K 1MB upload in 13.47 sec Diagnosis: Awesome! 20% + : 27.1 % faster than the average for host (qwest.net) Validation Link:: https://testmy.net/stats/id-VIYODNKJC

I had a similar test score/cache problem once on another isp. Even if i cleared cookies ect it would still test like it was cached. What I ended up having to do was after clearing cache and history, I had to refresh the IE browser on the testmy.net home page and then retest