I have posted on 4 difrent sites and no one seems to be able to help...have used cablenut and some reg tweaks...no help. I run winxp no service packs,up to date,sysgate firewall avast anti virus spysweeper no virus no spyware even scanned in safe mode....my advertised speed is up to 4000Kbps...have been up to tech 2 with adelphia many times no help....they give me bullsh*t about how to internet is to crowded now....basicly they dont know...did test on nitro heres the results TCP/Web100 Network Diagnostic Tool v5.3.3d
click START to begin
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client to server) . . . . . 367.23kB/s
running 10s inbound test (server to client) . . . . . . 1.53Mb/s
Your PC is connected to a Cable/DSL modem
Alarm: Duplex mismatch condition exists: Host set to Full and Switch set to Half duplex
WEB100 Enabled Statistics:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client to server) . . . . . 467.46kB/s
running 10s inbound test (server to client) . . . . . . 1.53Mb/s
------ Client System Details ------
OS data: Name = Windows XP, Architecture = x86, Version = 5.1
Java data: Vendor = Sun Microsystems Inc., Version = 1.5.0_06
------ Web100 Detailed Analysis ------
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 168.71 msec; the Packet size = 1452 Bytes; and
There were 9 packets retransmitted, 246 duplicate acks received, and 432 SACK blocks received
The connection was idle 0 seconds (0%) of the time
This connection is network limited 99.97% of the time.
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: ON
Information: Network Middlebox is modifying MSS variable
Server IP addresses are preserved End-to-End
Client IP addresses are preserved End-to-End (SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10]
Checking for congestion
(cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0]
(MaxSsthresh > 0) [30492>0]
estimate = 2.41 based on packet size = 11Kbits, RTT = 168.71msec, and loss = 7.44602E-4
The theoretical network limit is 2.41 Mbps
The NDT server has a 8192.0 KByte buffer which limits the throughput to 379.34 Mbps
Your PC/Workstation has a 99.0 KByte buffer which limits the throughput to 4.62 Mbps
The network based flow control limits the throughput to 2.82 Mbps
Client Data reports link is 'T1', Client Acks report link is 'T1'
Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet ..................................have been running test on every possible site and always around 1500Kbps. Also this is my only computer...no router etc...Please try help me...Im about to jump off a roof also heres the speedguide.net test results TCP options string = 020405ac0103030101010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.
Default TCP Receive Window (RWIN) = 102200
RWIN Scaling (RFC1323) = 1 bits (scale factor of 2)
Unscaled TCP Receive Window = 51100
For optimum performance, consider changing RWIN to a multiple of MSS.
Other RWIN values that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your TCP Window limits you to: 4088 kbps (511 KBytes/s) @ 200ms
Your TCP Window limits you to: 1635.2 kbps (204.4 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 50 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)