I have Wireless Highspeed with Xplorenet. The connection is rated 5.0Mbps download and 1.5Mbps up, but I am nowhere near that:
Your connection is: 1625 Kbps (about 1.6 Mbps)
You downloaded at: 198 kB/s
Your TRuSPEED: ^info^ 1739 Kbps :: 212 kB/s (7% overhead factored)
Bottom Line: You are running: 29 times faster than 56K and can download 1 megabyte in 5.17 second(s)
Diagnosis: ^info^ May need help : running at only 86.67 % of your hosts average (135.29)
With Wireless there is a module on the roof, that is aimed perfectly (First thing I checked) that connects to your network via ethernet cable. I do not have, nor do I need a router or modem. the module is always connected to the internet, but has a dynamic IP (ip will change if power is cycled) and is connected directly to my computer. I have tried two cables to rule out a cable issue. When I run the TCP analyser I am not sure wether it is giving me the results for my computer or the module...
TCP properties for IP = xxx.46.130.26 ()
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322)
Notes: Read the Analyzer FAQ if the above is not your IP address.
Your IP (xxx.46.135.29) appears to be behind a web proxy server (xxx.46.130.26) and results shown might not be for your system.
TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default TCP Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 65535
Note: TCP 1323 Options need to be enabled for RWIN over 2^16 (65535). Windows 9x might also need the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your TCP Window limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your TCP Window limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 119 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
Nitro results:
TCP/Web100 Network Diagnostic Tool v5.3.3d
click START to begin
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client to server) . . . . . 557.47Kb/s
running 10s inbound test (server to client) . . . . . . 1.36Mb/s
Your PC is connected to a Cable/DSL modem
Information: Other network traffic is congesting the link
Statistics:
------ Web100 Detailed Analysis ------
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 164.04 msec; the Packet size = 1460 Bytes; and
There were 12 packets retransmitted, 79 duplicate acks received, and 86 SACK blocks received
The connection was idle 0 seconds (0%) of the time
This connection is network limited 99.97% of the time.
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: OFF
Packet size is preserved End-to-End
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [142.46.x.x] but Client says [169.254.1.2]
estimate = 1.36 based on packet size = 11Kbits, RTT = 164.04msec, and loss = 0.002508361
The theoretical network limit is 1.36 Mbps
The NDT server has a 101.0 KByte buffer which limits the throughput to 4.81 Mbps
Your PC/Workstation has a 63.0 KByte buffer which limits the throughput to 3.04 Mbps
The network based flow control limits the throughput to 2.30 Mbps
Client Data reports link is 'T1', Client Acks report link is 'T1'
Server Data reports link is '10 Gig', Server Acks report link is 'T1'
Would appreciate it if there is any way I can tweak this. I have spent hours online with tech support, but to no avail....
Thanks
David
<edit>hid IP<br>-FE
