Wadely

my friend dont believe me hahaha

well thank you very much for the help and pretty much doubling my speeds haha

just about the same again http://ttester.broadbandreports.com/tweak/block:541c1b3?service=cable&speed=4000&os=winXP&via=normal

tweakster after change to 4400,600 http://ttester.broadbandreports.com/tweak/block:1cfad6e?service=cable&speed=4000&os=winXP&via=normal

after making change to 4400,600 outcome was about same

after vans help

well i get the same dl but my ul is at abou .4 megs now

ok applied your 4000 512 rebooted this is what i got http://ttester.broadbandreports.com/tweak/block:16d0e77?service=cable&speed=4000&os=winXP&via=normal

after zeroing out the cablenut and rebooting this is what i got http://ttester.broadbandreports.com/tweak/block:2f49a6a?service=cable&speed=4000&os=winXP&via=normal vastly different from what i had before, im thinking that there were old settings applied, and i did not reboor after configuring the new ones you sent to me

ok i applied your settings and ran tweakster again and this is what i got this time http://ttester.broadbandreports.com/tweak/block:107e4b9?service=cable&speed=4000&os=winXP&via=normal has not changed my speeds however

sorry i did not use that file i used one out of a big zip of different configs you had i did not see where to get the DSL PPPoE 4000 600.zip from, and im not quite sure what you mean by the nitro being a 1452 and the tweak being a 1460

here ya go, and i most certainly appreciate the help http://ttester.broadbandreports.com/tweak/block:142c11b?service=cable&speed=4000&os=winXP&via=normal

well I have no clue but my ul is the same but my dl has now been cut in about half maybe a lil more

yea im running xp i have sp2 and patches, im with wyandotte municipal advertising 4m dl and .6m ul, im only 2 mile from their station by the way TCP/Web100 Network Diagnostic Tool v5.2.1e click START to begin Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 239.11Kb/s running 10s inbound test (server to client) . . . . . . 2.58Mb/s Your PC is connected to a Cable/DSL modem :::.. Download Stats ..::: Connection is:: 2747 Kbps about 2.7 Mbps (tested with 2992 KB) Download Speed is:: 335 KB/s Tested From:: http://www.testmy.net/ Test Time:: Tue Feb 8 04:43:40 EST 2005 Bottom Line:: 49X faster than 56K 1MB download in 3.06 sec Validation Link:: https://testmy.net/id-OP43AWCRS 1. Your Tweakable Settings: Receive Window (RWIN): 65535 Window Scaling: 0 Path MTU Discovery: ON RFC1323 Window Scaling: ON RFC1323 Time Stamping: OFF Selective Acks: ON MSS requested: 1452 TTL: (less any hops behind firewall) 129 TTL remaining: 115 2. Test 146000 byte download Actual data bytes sent: 146000 Actual data packets: 101 Max packet sent (MTU): 1492 Max packet recd (MTU): 1492 Retransmitted data packets: 0 sacks you sent: 0 pushed data pkts: 5 data transmit time: 0.363 secs our max idletime: 46.5 ms transfer rate: 165827 bytes/sec transfer rate: 1326 kbits/sec This is not a speed test! transfer efficiency: 100% 3. ICMP (ping) check Minimum ping: 33 ms Maximum ping: 58 ms Ping stability: 35 34 34 35 34 35 58 33 33 54 hope i got this right lol