i think the speeds are 4000/386.And the snr changed when they replaced my modem ,it seems the same model should get the same snr?RITE?,,on side note u play socom2 online???
over a maximum of 30 hops:
1 3 ms 2 ms 2 ms 192.168.2.1
2 12 ms 10 ms 10 ms 10.68.152.1
3 10 ms 10 ms 11 ms 68.87.163.193
4 13 ms 11 ms 12 ms 12.124.58.153
5 30 ms 29 ms 30 ms gbr6-p80.attga.ip.att.net [12.123.21.78]
6 28 ms 30 ms 30 ms tbr1-cl1.dlstx.ip.att.net [12.122.2.89]
7 28 ms 28 ms 29 ms gar1-p360.dlrtx.ip.att.net [12.123.196.101]
8 29 ms 28 ms 30 ms 12.119.136.14
9 28 ms 29 ms 28 ms dist-vlan31.dsr3-2.dllstx3.theplanet.com [70.85.127.30]
10 29 ms 29 ms 30 ms dist-vlan41.dsr2-1.dllstx4.theplanet.com [70.85.127.83]
11 28 ms 28 ms 28 ms gig1-0-1.tp-car9-1.dllstx4.theplanet.com [67.18.116.69]
12 27 ms 35 ms 27 ms 85.67-18-179.reverse.theplanet.com [67.18.179.85]
Trace complete.
lightning reecently fried my modem so comcast brought me a replacement sb5120 but now my snr is a steday 31 where as it was 34-33 any ideas also here a copy of my log======
Frequency 627000000 Hz
Signal to Noise Ratio 31 dB
QAM 256
Network Access Control Object ON
Power Level -4 dBmV
The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
Upstream Value
Channel ID 4
Frequency 30992000 Hz
Ranging Service ID 1863
Symbol Rate 3.200 Msym/s
Power Level 47 dBmV
700101000016 5-Warning D03.0 DHCP WARNING - Non-critical field invalid in response
050625104204 3-Critical R02.0 No Ranging Response received - T3 time-out
050625094120 3-Critical T01.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol tim
050625094120 3-Critical R04.0 Received Response to Broadcast Maintenance Request, but no Unicast Maintena
050625024038 3-Critical R02.0 No Ranging Response received - T3 time-out
700101000017 3-Critical T04.0 SYNC Timing Synchronization failure - Failed to receive MAC SYNC frame with
700101000007 3-Critical T01.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol tim
700101000006 3-Critical T04.0 SYNC Timing Synchronization failure - Failed to receive MAC SYNC frame with
700101000027 3-Critical R02.0 No Ranging Response received - T3 time-out
700101000017 3-Critical T04.0 SYNC Timing Synchronization failure - Failed to receive MAC SYNC frame with
700101000007 3-Critical T01.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol tim
700101000006 3-Critical T04.0 SYNC Timing Synchronization failure - Failed to receive MAC SYNC frame w
thanks for any help