hoodlegend Posted March 7, 2005 CID Share Posted March 7, 2005 Hey VanBuren! I haven't been gettin 90% of my advertised speed, which is 6000/500. My uploads have been slow and my downloads are low. My internet provider is W.O.W [Wide Open West]. I need help please. When I'm downloading a large file.....it only downloads at aroud 300 kb or less. :::.. Download Stats ..::: Connection is:: 5291 Kbps about 5.3 Mbps (tested with 5983 KB) Download Speed is:: 646 KB/s Tested From:: http://www.testmy.net/ Test Time:: Mon Mar 7 18:22:22 EST 2005 Bottom Line:: 94X faster than 56K 1MB download in 1.59 sec Diagnosis: Awesome! 20% + : 84.81 % faster than the average for host (wideopenwest.com) Validation Link:: https://testmy.net/stats/id-JOF2A3815 :::.. Upload Stats ..::: Connection is:: 458 Kbps about 0.5 Mbps (tested with 579 KB) Upload Speed is:: 56 KB/s Tested From:: http://www.testmy.net/ Test Time:: Mon Mar 7 18:28:30 EST 2005 Bottom Line:: 8X faster than 56K 1MB upload in 18.29 sec Diagnosis: Awesome! 20% + : 47.27 % faster than the average for host (wideopenwest.com) Validation Link:: https://testmy.net/stats/id-R2LOYUXS5 WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 554.56Kb/s running 10s inbound test (server to client) . . . . . . 746.03kb/s ------ Client System Details ------ OS data: Name = Windows XP, Architecture = x86, Version = 5.1 Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06 ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Full Duplex mode Information: throughput is limited by other network traffic. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 87.01 msec; the Packet size = 1460 Bytes; and There were 20 packets retransmitted, 95 duplicate acks received, and 104 SACK blocks received The connection was idle 0 seconds (0%) of the time This connection is network limited 99.97% of the time. Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Client IP addresses are preserved End-to-End Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 8, 2005 CID Share Posted March 8, 2005 hey hoodlegend follow these steps and post again https://testmy.net/topic-2097 VanBuren Quote Link to comment Share on other sites More sharing options...
hoodlegend Posted March 8, 2005 Author CID Share Posted March 8, 2005 [1.] I'm running Windows XP Pro SP2 with the Fix. [2.] My Service is Wide Open West with advertised speeds of 6000/500 [3.] I have the Cablenut program. Here's my Tweak Tester results.... http://ttester.broadbandreports.com/tweak/block:1f3516a?service=cable&speed=6000&os=winXP&via=normal [4.] Download Test Results. :::.. Download Stats ..::: Connection is:: 4808 Kbps about 4.8 Mbps (tested with 2992 KB) Download Speed is:: 587 KB/s Tested From:: http://www.testmy.net/ Test Time:: Tue Mar 8 15:12:19 EST 2005 Bottom Line:: 86X faster than 56K 1MB download in 1.74 sec Diagnosis: Awesome! 20% + : 68.05 % faster than the average for host (wideopenwest.com) Validation Link:: https://testmy.net/stats/id-K9H7L851A [4b.] Nitro Test Results. WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 560.58Kb/s running 10s inbound test (server to client) . . . . . . 1.10Mb/s ------ Client System Details ------ OS data: Name = Windows XP, Architecture = x86, Version = 5.1 Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06 ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Full Duplex mode Information: throughput is limited by other network traffic. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 80.45 msec; the Packet size = 1460 Bytes; and There were 21 packets retransmitted, 129 duplicate acks received, and 141 SACK blocks received The connection was idle 0 seconds (0%) of the time This connection is network limited 99.97% of the time. Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Client IP addresses are preserved End-to-End Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 8, 2005 CID Share Posted March 8, 2005 do you have a router? also what is your NIC duplex settings? VanBuren Quote Link to comment Share on other sites More sharing options...
hoodlegend Posted March 8, 2005 Author CID Share Posted March 8, 2005 No. I'm connected directly to my Modem. My Duplex settings are on Auto sense. Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 8, 2005 CID Share Posted March 8, 2005 Try changing your NIC duplex setting to 10 Mbps half duplex VanBuren Quote Link to comment Share on other sites More sharing options...
hoodlegend Posted March 8, 2005 Author CID Share Posted March 8, 2005 Ok. I did that. Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 8, 2005 CID Share Posted March 8, 2005 Ok. I did that. and? Quote Link to comment Share on other sites More sharing options...
hoodlegend Posted March 8, 2005 Author CID Share Posted March 8, 2005 :::.. Download Stats ..::: Connection is:: 5343 Kbps about 5.3 Mbps (tested with 2992 KB) Download Speed is:: 652 KB/s Tested From:: http://www.testmy.net/ Test Time:: Tue Mar 8 16:10:26 EST 2005 Bottom Line:: 95X faster than 56K 1MB download in 1.57 sec Diagnosis: Awesome! 20% + : 85.39 % faster than the average for host (wideopenwest.com) Validation Link:: https://testmy.net/stats/id-L4Z5X7NK6 Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 8, 2005 CID Share Posted March 8, 2005 well traffic is kinda high this time a day, i suggest you use these settings and check speed early mornings and see if you can hit your cap now run this test http://nitro.ucsc.edu/ copy all info in Statistic and More info and also speed and paste it here VanBuren Quote Link to comment Share on other sites More sharing options...
REV0LUTI0NIZED Posted March 8, 2005 CID Share Posted March 8, 2005 Sorry for getting out of the topic but I just tested there and got these insane results. Hope it stay's like that forever. Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 8, 2005 CID Share Posted March 8, 2005 cant open that picture is it damaged? VanBuren Quote Link to comment Share on other sites More sharing options...
REV0LUTI0NIZED Posted March 8, 2005 CID Share Posted March 8, 2005 No, it's not but these are the results I got. TCP/Web100 Network Diagnostic Tool v5.3.3d click START to begin Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 5.26Mb/s running 10s inbound test (server to client) . . . . . . 5.53Mb/s Your PC is connected to a Cable/DSL modem Information: Other network traffic is congesting the link Quote Link to comment Share on other sites More sharing options...
hoodlegend Posted March 8, 2005 Author CID Share Posted March 8, 2005 WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 8, 2005 CID Share Posted March 8, 2005 No, it's not but these are the results I got. TCP/Web100 Network Diagnostic Tool v5.3.3d click START to begin Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 5.26Mb/s running 10s inbound test (server to client) . . . . . . 5.53Mb/s Your PC is connected to a Cable/DSL modem Information: Other network traffic is congesting the link nice upload i been emailing them about upload test after i scored 41 Mbps against a Swizz NDT server, so i think they working on it if you got the time, click report problem and post these to them and tell them your cap is 768 Kbps hehe VanBuren Quote Link to comment Share on other sites More sharing options...
REV0LUTI0NIZED Posted March 8, 2005 CID Share Posted March 8, 2005 Ooo Man . Okay I will. Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 8, 2005 CID Share Posted March 8, 2005 WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 558.30Kb/s running 10s inbound test (server to client) . . . . . . 542.43kb/s ------ Client System Details ------ OS data: Name = Windows XP, Architecture = x86, Version = 5.1 Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06 ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Full Duplex mode Information: throughput is limited by other network traffic. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 91.96 msec; the Packet size = 1460 Bytes; and There were 20 packets retransmitted, 78 duplicate acks received, and 84 SACK blocks received The connection was idle 0 seconds (0%) of the time This connection is network limited 99.97% of the time. Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Client IP addresses are preserved End-to-End WEB100 Kernel Variables: Client: localhost/127.0.0.1 AckPktsIn: 289 AckPktsOut: 0 BytesRetrans: 29200 CongAvoid: 172 CongestionOverCount: 0 CongestionSignals: 14 CountRTT: 194 CurCwnd: 10220 CurMSS: 1460 CurRTO: 310 CurRwinRcvd: 769536 CurRwinSent: 5840 CurSsthresh: 4380 DSACKDups: 0 DataBytesIn: 0 DataBytesOut: 737300 DataPktsIn: 0 DataPktsOut: 505 DupAcksIn: 78 ECNEnabled: 0 FastRetran: 14 MaxCwnd: 13140 MaxMSS: 1460 MaxRTO: 350 MaxRTT: 230 MaxRwinRcvd: 769536 MaxRwinSent: 5840 MaxSsthresh: 5840 MinMSS: 1460 MinRTO: 270 MinRTT: 60 MinRwinRcvd: 48096 MinRwinSent: 5840 NagleEnabled: 1 OtherReductions: 0 PktsIn: 289 PktsOut: 505 PktsRetrans: 20 X_Rcvbuf: 103424 RcvWinScale: 7 SACKEnabled: 3 SACKsRcvd: 84 SendStall: 0 SlowStart: 18 SampleRTT: 70 SmoothedRTT: 80 X_Sndbuf: 103424 SndWinScale: 4 SndLimTimeRwin: 0 SndLimTimeCwnd: 10025702 SndLimTimeSender: 2641 SndLimTransRwin: 0 SndLimTransCwnd: 1 SndLimTransSender: 1 SndLimBytesRwin: 0 SndLimBytesCwnd: 737300 SndLimBytesSender: 0 SubsequentTimeouts: 0 SumRTT: 17840 Timeouts: 0 TimestampsEnabled: 0 WinScaleRcvd: 4 WinScaleSent: 7 DupAcksOut: 0 StartTimeUsec: 678575 Duration: 10075736 c2sData: 2 c2sAck: 2 s2cData: 9 s2cAck: 2 half_duplex: 0 link: 100 congestion: 1 bad_cable: 0 mismatch: 0 spd: 0.00 bw: 0.73 loss: 0.027722772 avgrtt: 91.96 waitsec: 0.00 timesec: 10.00 order: 0.2699 rwintime: 0.0000 sendtime: 0.0003 cwndtime: 0.9997 rwin: 5.8711 swin: 64.0000 cwin: 0.1003 rttsec: 0.091959 Sndbuf: 8388608 aspd: 1.20243 Checking for mismatch on uplink (speed > 50 [0>50], (xmitspeed < 5) [0.55<5] (rwintime > .9) [0>.9], (loss < .01) [0.02<.01] Checking for excessive errors condition (loss/sec > .15) [0.00>.15], (cwndtime > .6) [0.99>.6], (loss < .01) [0.02<.01], (MaxSsthresh > 0) [5840>0] Checking for 10 Mbps link (speed < 9.5) [0<9.5], (speed > 3.0) [0>3.0] (xmitspeed < 9.5) [0.55<9.5] (loss < .01) [0.02<.01], (mylink > 0) [3.0>0] Checking for Wireless link (sendtime = 0) [3.0E=0], (speed < 5) [0<5] (Estimate > 50 [0.73>50], (Rwintime > 90) [0>.90] (RwinTrans/CwndTrans = 1) [0/1=1], (mylink > 0) [3.0>0] Checking for DSL/Cable Modem link (speed < 2) [0<2], (SndLimTransSender = 0) [1=0] (SendTime = 0) [3.0E-4=0], (mylink > 0) [3.0>0] Checking for half-duplex condition (rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30], (SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10] Checking for congestion (cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0] (MaxSsthresh > 0) [5840>0] estimate = 0.73 based on packet size = 11Kbits, RTT = 91.96msec, and loss = 0.027722772 The theoretical network limit is 0.73 Mbps The NDT server has a 8192.0 KByte buffer which limits the throughput to 695.96 Mbps Your PC/Workstation has a 751.0 KByte buffer which limits the throughput to 63.84 Mbps The network based flow control limits the throughput to 1.09 Mbps Client Data reports link is 'T1', Client Acks report link is 'T1' Server Data reports link is '10 Gig', Server Acks report link is 'T1' :::.. Download Stats ..::: Connection is:: 4954 Kbps about 5 Mbps (tested with 5983 KB) Download Speed is:: 605 KB/s Tested From:: http://www.testmy.net/ Test Time:: Tue Mar 8 16:27:38 EST 2005 Bottom Line:: 88X faster than 56K 1MB download in 1.69 sec Diagnosis: Awesome! 20% + : 71.72 % faster than the average for host (wideopenwest.com) Validation Link:: https://testmy.net/stats/id-FKIMBQRGP try another NDT server, your loosing alot of packets to that server http://e2epi.internet2.edu/ndt/ndt-server-list.html VanBuren Quote Link to comment Share on other sites More sharing options...
hoodlegend Posted March 8, 2005 Author CID Share Posted March 8, 2005 WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 548.63Kb/s running 10s inbound test (server to client) . . . . . . 4.74Mb/s ------ Client System Details ------ OS data: Name = Windows XP, Architecture = x86, Version = 5.1 Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06 ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Half Duplex mode Information: throughput is limited by other network traffic. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 50.35 msec; the Packet size = 1460 Bytes; and There were 18 packets retransmitted, 217 duplicate acks received, and 249 SACK blocks received The connection was idle 0 seconds (0%) of the time This connection is network limited 99.93% of the time. Contact your local network administrator to report a network problem Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Client IP addresses are preserved End-to-End WEB100 Kernel Variables: Client: localhost/127.0.0.1 AckPktsIn: 2154 AckPktsOut: 0 BytesRetrans: 26280 CongestionSignals: 9 CountRTT: 1899 CurrentCwnd: 52560 CurrentMSS: 1460 CurrentRTO: 270 CurrentRwinRcvd: 769536 CurrentRwinSent: 5840 CurrentSsthresh: 23360 DSACKDups: 0 DataBytesIn: 0 DataBytesOut: 5910080 DataPktsIn: 0 DataPktsOut: 4048 DupAcksIn: 217 ECNEnabled: 0 FastRetran: 9 MaxCwnd: 83220 MaxMSS: 1460 MaxRTO: 270 MaxRTT: 100 MaxRwinRcvd: 769536 MaxRwinSent: 5840 MaxSsthresh: 40880 MinMSS: 1460 MinRTO: 230 MinRTT: 30 MinRwinRcvd: 48096 MinRwinSent: 5840 NagleEnabled: 1 PktsIn: 2156 PktsOut: 4048 PktsRetrans: 18 Rcvbuf: 128000 SACKEnabled: 3 SACKsRcvd: 249 SmoothedRTT: 70 Sndbuf: 128000 SndLimTimeRwin: 0 SndLimTimeCwnd: 10012282 SndLimTimeSender: 6979 SndLimTransRwin: 0 SndLimTransCwnd: 1 SndLimTransSender: 1 SndLimBytesRwin: 0 SndLimBytesCwnd: 5910080 SndLimBytesSender: 0 SumRTT: 95630 Timeouts: 0 TimestampsEnabled: 0 WinScaleRcvd: 4 WinScaleSent: 7 DupAcksOut: 0 StartTime: 2147483647 CurrTime: 10023272 c2sData: 2 c2sAck: 2 s2cData: 6 s2cAck: 3 Checking for mismatch condition (cwndtime > .3) [0.99>.3], (MaxSsthresh > 0) [40880>0], (PktsRetrans/sec > 2) [1.79>2], (estimate > 2) [4.69>2] Checking for mismatch on uplink (speed > 50 [4.71>50], (xmitspeed < 5) [0.54<5] (rwintime > .9) [0>.9], (loss < .01) [0.00<.01] Checking for excessive errors condition (loss/sec > .15) [2.22>.15], (cwndtime > .6) [0.99>.6], (loss < .01) [0.00<.01], (MaxSsthresh > 0) [40880>0] Checking for 10 Mbps link (speed < 9.5) [4.71<9.5], (speed > 3.0) [4.71>3.0] (xmitspeed < 9.5) [0.54<9.5] (loss < .01) [0.00<.01], (link > 0) [0>0] Checking for Wireless link (sendtime = 0) [6.96=0], (speed < 5) [4.71<5] (Estimate > 50 [4.69>50], (Rwintime > 90) [0>.90] (RwinTrans/CwndTrans = 1) [0/1=1], (link > 0) [0>0] Checking for DSL/Cable Modem link (speed < 2) [4.71<2], (SndLimTransSender = 0) [1=0] (SendTime = 0) [6.965583589448363E-4=0], (link > 0) [0>0] Checking for half-duplex condition (rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30], (SenderTrans/sec > 30) [0.10>30], OR (link <= 10) [0<=10] Checking for congestion (cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0] (MaxSsthresh > 0) [40880>0] bw = 4.69 based on packet size = 11Kbits, RTT = 50.35msec, and loss = 0.002223320072516799 The theoretical network limit is 4.69 Mbps The transmit buffer (125.0 KByte) limits the application to 19.39 Mbps Your receive buffer (751.0 KByte) limits the application to 116.58 Mbps The network based flow control limits the application to 12.60 Mbps Client Data reports link is 'T1', Client Acks report link is 'T1' Server Data reports link is 'OC-12', Server Acks report link is 'Ethernet' From the Flint Michigan server. Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 8, 2005 CID Share Posted March 8, 2005 try this, if this dosent help, i suggest to contact your ISP open cablenut, click delete cablenut tweaks and click save to registry now set these values all other fields must be blank TcpWindowsize 64240 GlobalMaxTcpWindowSize 64240 now click save to registry and reboot VanBuren Quote Link to comment Share on other sites More sharing options...
hoodlegend Posted March 9, 2005 Author CID Share Posted March 9, 2005 Those Cablenut settings gave me these speeds......... :::.. Download Stats ..::: Connection is:: 6193 Kbps about 6.2 Mbps (tested with 12160 KB) Download Speed is:: 756 KB/s Tested From:: http://www.testmy.net/ Test Time:: Wed Mar 9 02:38:54 EST 2005 Bottom Line:: 111X faster than 56K 1MB download in 1.35 sec Diagnosis: Awesome! 20% + : 113.18 % faster than the average for host (wideopenwest.com) Validation Link:: https://testmy.net/stats/id-MQJOCRBVW WEB100 Enabled Statistics: Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 527.41Kb/s running 10s inbound test (server to client) . . . . . . 5.92Mb/s ------ Client System Details ------ OS data: Name = Windows XP, Architecture = x86, Version = 5.1 Java data: Vendor = Sun Microsystems Inc., Version = 1.4.2_06 ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Full Duplex mode Information: throughput is limited by other network traffic. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 89.19 msec; the Packet size = 1460 Bytes; and There were 28 packets retransmitted, 195 duplicate acks received, and 212 SACK blocks received The connection was idle 0 seconds (0%) of the time This connection is network limited 99.97% of the time. Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Client IP addresses are preserved End-to-End Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 9, 2005 CID Share Posted March 9, 2005 great what settings did you use to have? VanBuren Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.