raptor20561 Posted March 30, 2005 CID Share Posted March 30, 2005 just wondering is this a problem? my connection is 6 down 768 up, check out the bottom of the report from the UCSC server i made the important parts bold and red for easy viewing ^^ btw running win 2000 pro and a router Another client is currently being served, your test will begin within 45 seconds Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 948.75Kb/s running 10s inbound test (server to client) . . . . . . 5.10Mb/s Your PC is connected to a Cable/DSL modem Alarm: Duplex mismatch condition exists: Host set to Full and Switch set to Half duplex click START to re-test Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 950.27Kb/s running 10s inbound test (server to client) . . . . . . 5.01Mb/s Your PC is connected to a Cable/DSL modem Alarm: Duplex mismatch condition exists: Host set to Full and Switch set to Half duplex WEB100 Kernel Variables: Client: localhost/127.0.0.1 AckPktsIn: 690 AckPktsOut: 0 BytesRetrans: 0 CongAvoid: 0 CongestionOverCount: 0 CongestionSignals: 0 CountRTT: 564 CurCwnd: 65700 CurMSS: 1460 CurRTO: 300 CurRwinRcvd: 64240 CurRwinSent: 5840 CurSsthresh: 2147483647 DSACKDups: 0 DataBytesIn: 0 DataBytesOut: 6278000 DataPktsIn: 0 DataPktsOut: 4300 DupAcksIn: 125 ECNEnabled: 0 FastRetran: 0 MaxCwnd: 65700 MaxMSS: 1460 MaxRTO: 320 MaxRTT: 160 MaxRwinRcvd: 64240 MaxRwinSent: 5840 MaxSsthresh: 0 MinMSS: 1460 MinRTO: 230 MinRTT: 30 MinRwinRcvd: 64240 MinRwinSent: 5840 NagleEnabled: 1 OtherReductions: 0 PktsIn: 690 PktsOut: 4300 PktsRetrans: 0 X_Rcvbuf: 103424 RcvWinScale: 2147483647 SACKEnabled: 3 SACKsRcvd: 0 SendStall: 0 SlowStart: 43 SampleRTT: 100 SmoothedRTT: 100 X_Sndbuf: 103424 SndWinScale: 2147483647 SndLimTimeRwin: 9226440 SndLimTimeCwnd: 782701 SndLimTimeSender: 2890 SndLimTransRwin: 1 SndLimTransCwnd: 1 SndLimTransSender: 1 SndLimBytesRwin: 5856060 SndLimBytesCwnd: 421940 SndLimBytesSender: 0 SubsequentTimeouts: 0 SumRTT: 55570 Timeouts: 0 TimestampsEnabled: 0 WinScaleRcvd: 2147483647 WinScaleSent: 2147483647 DupAcksOut: 0 StartTimeUsec: 321797 Duration: 10025144 c2sData: 2 c2sAck: 2 s2cData: 8 s2cAck: 3 half_duplex: 0 link: 100 congestion: 0 bad_cable: 0 mismatch: 1 spd: 0.00 bw: 113.05 loss: 0.000001000 avgrtt: 98.53 waitsec: 0.00 timesec: 10.00 order: 0.1812 rwintime: 0.9215 sendtime: 0.0003 cwndtime: 0.0782 rwin: 0.4901 swin: 0.7891 cwin: 0.5013 rttsec: 0.098528 Sndbuf: 103424 aspd: 5.77794 Checking for mismatch on uplink (speed > 50 [0>50], (xmitspeed < 5) [0.95<5] (rwintime > .9) [0.92>.9], (loss < .01) [1.0E<.01] Checking for excessive errors condition (loss/sec > .15) [1.0E>.15], (cwndtime > .6) [0.07>.6], (loss < .01) [1.0E<.01], (MaxSsthresh > 0) [0>0] Checking for 10 Mbps link (speed < 9.5) [0<9.5], (speed > 3.0) [0>3.0] (xmitspeed < 9.5) [0.95<9.5] (loss < .01) [1.0E<.01], (mylink > 0) [3.0>0] Checking for Wireless link (sendtime = 0) [3.0E=0], (speed < 5) [0<5] (Estimate > 50 [113.05>50], (Rwintime > 90) [0.92>.90] (RwinTrans/CwndTrans = 1) [1/1=1], (mylink > 0) [3.0>0] Checking for DSL/Cable Modem link (speed < 2) [0<2], (SndLimTransSender = 0) [1=0] (SendTime = 0) [3.0E-4=0], (mylink > 0) [3.0>0] Checking for half-duplex condition (rwintime > .95) [0.92>.95], (RwinTrans/sec > 30) [0.1>30], (SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10] Checking for congestion (cwndtime > .02) [0.07>.02], (mismatch = 0) [1=0] (MaxSsthresh > 0) [0>0] estimate = 113.05 based on packet size = 11Kbits, RTT = 98.53msec, and loss = 1.0E-6 The theoretical network limit is 113.05 Mbps The NDT server has a 101.0 KByte buffer which limits the throughput to 8.00 Mbps Your PC/Workstation has a 62.0 KByte buffer which limits the throughput to 4.97 Mbps The network based flow control limits the throughput to 5.08 Mbps Client Data reports link is 'T1', Client Acks report link is 'T1' Server Data reports link is 'OC-48', Server Acks report link is 'Ethernet' Quote Link to comment Share on other sites More sharing options...
VanBuren Posted March 30, 2005 CID Share Posted March 30, 2005 hey raptor20561 and welcome to the forum that duplex mode test is not accurate it read my line as half duplex even tho i know for sure its full duplex as long as you have good speed, do not worry about that when using a router, you should use 100 Mbps full duplex on your NIC, and leave all other NIC settings as default VanBuren Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.