Cholla, thanks a lot for taking the time
Ok, something is working here. My upload got about 15-20 percent faster (it still varies) and my download is now at 90+ percent. Still trying to figure out how to get the screenshot of my cablenut settings in my post. Most of the areas are blank...(except for the ones you told me to fill in and a few others)
Will now try it with the other settings you provided.
:::.. Upload Stats ..:::
Connection is:: 275 Kbps about 0.3 Mbps (tested with 579 kB)
Upload Speed is:: 34 kB/s
Tested From:: https://testmy.net/ (server2)
Test Time:: Sat Oct 22 12:47:58 EDT 2005
Bottom Line:: 5X faster than 56K 1MB upload in 30.12 sec
Diagnosis: May need help : running at only 52.78 % of your hosts average (cox.net)
Validation Link:: https://testmy.net/stats/id-B35Y2E1MC
:::.. Download Stats ..:::
Connection is:: 3364 Kbps about 3.4 Mbps (tested with 12160 kB)
Download Speed is:: 411 kB/s
Tested From:: https://testmy.net/ (server2)
Test Time:: Sat Oct 22 12:54:13 EDT 2005
Bottom Line:: 60X faster than 56K 1MB download in 2.49 sec
Diagnosis: 90% + Okay : running at 91.79 % of your hosts average (cox.net)
Validation Link:: https://testmy.net/stats/id-8J2YXLUMS
I also ran the test you recommended:
http://speedtest.umflint.edu/
but am not sure if you need me to post the results, but here are the basics
Web100 Detailed Analysis ------
Cable modem/DSL/T1 link found.
Link set to Half Duplex mode
No network congestion discovered.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 125.27 msec; the Packet size = 1460 Bytes; and
No packet loss was observed.
This connection is receiver limited 93.73% of the time.
Increasing the current receive buffer (62.0 KB) will improve performance
This connection is network limited 6.23% of the time.
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: OFF
Packet size is preserved End-to-End
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [68.10.226.118] but Client says [192.168.0.101]
D1nonly
