REDJ

Will I have to change any of these settings if I start adding multiple computers and a router? I normally have 3- 4 on the net the same time. I know if I want them to have as good connection as me I should give tem the cablenut settings, but will they change if more comps and a router are added?

:::.. Download Stats ..:::

Connection is:: 5581 Kbps about 5.6 Mbps (tested with 2992 kB)

Download Speed is:: 681 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Mon Jan 09 2006 23:30:02 GMT-0600 (Central Standard Time)

Bottom Line:: 100X faster than 56K 1MB download in 1.5 sec

Diagnosis: Awesome! 20% + : 132.06 % faster than the average for host (qwest.net)

Validation Link:: https://testmy.net/stats/id-8N0JPTQ12

:::.. Upload Stats ..:::

Connection is:: 783 Kbps about 0.8 Mbps (tested with 2992 kB)

Upload Speed is:: 96 kB/s

Tested From:: https://testmy.net/ (server1)

Test Time:: Mon Jan 09 2006 23:31:20 GMT-0600 (Central Standard Time)

Bottom Line:: 14X faster than 56K 1MB upload in 10.67 sec

Diagnosis: Awesome! 20% + : 64.15 % faster than the average for host (qwest.net)

Validation Link:: https://testmy.net/stats/id-JO5LHIQCN

YOUS A GOD! REDJ LIKE!

I have done both, virus in safe mode with networking and spyware both in normal and safe mode with networking. Is there some settings that may be messed up int he registry? I'm used to cable with a MTU of 1500, and now mine is set to 1492, is theer a way to test if this is the problem? and the MTU I should have?

Test ran for 45 minutes and did not complete. I have no other firewalls running. Whewn the guy hooked it up I said I only had 13dB going into my phone line, that was for outside where the phone line comes into the house. I also have 13dB at the phone jack with a barnd new phone cord and new modem. I could literally throw a rock and hit one of their serveers if ti was outside, hat's how close I am to them. Any ideas?

Test ran for about 1 hour and did not complete.

Yes, but I am not using it, the firewall on the modem is turned off and I am using sygate.

TCP options string = 020405ac0103030301010402

MTU = 1492

MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.

MSS = 1452

MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.

Default Receive Window (RWIN) = 522720

RWIN Scaling (RFC1323) = 3 bits (scale factor of 6)

Unscaled Receive Window = 65340

RWIN is a multiple of MSS

Other values for RWIN that might work well with your current MTU/MSS:

511104 (MSS x 44 * scale factor of

255552 (MSS x 44 * scale factor of 4)

127776 (MSS x 44 * scale factor of 2)

63888 (MSS x 44)

bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 20908.8 kbps (2613.6 KBytes/s) @ 200ms

Your RcvWindow limits you to: 8363.52 kbps (1045.44 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 52 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000 (0)

The current date is: Mon 01/09/2006

The current time is: 21:29:59.48

Microsoft Windows XP [Version 5.1.2600]

Pinging testmy.net [67.18.179.85] with 32 bytes of data:

Reply from 67.18.179.85: bytes=32 time=109ms TTL=51

Reply from 67.18.179.85: bytes=32 time=131ms TTL=51

Reply from 67.18.179.85: bytes=32 time=130ms TTL=51

Reply from 67.18.179.85: bytes=32 time=110ms TTL=51

Ping statistics for 67.18.179.85:

    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

    Minimum = 109ms, Maximum = 131ms, Average = 120ms

Ping Complete.

Tracing route to testmy.net [67.18.179.85]

over a maximum of 30 hops:

  1    *        *        *    Request timed out.

  2    40 ms    38 ms    38 ms  dlth-dsl-gw01-193.dlth.qwest.net [65.102.106.193]

  3    40 ms    38 ms    38 ms  dlth-agw1.inet.qwest.net [65.102.106.93]

  4    41 ms    39 ms    39 ms  dth-core-01.inet.qwest.net [207.109.192.241]

  5    81 ms  112 ms  108 ms  mpl-core-02.inet.qwest.net [205.171.5.117]

  6    69 ms    68 ms    68 ms  cer-core-02.inet.qwest.net [67.14.8.18]

  7    69 ms    68 ms    68 ms  cer-brdr-01.inet.qwest.net [205.171.139.62]

  8    68 ms    68 ms    69 ms  qwest-gw.cgcil.ip.att.net [192.205.32.97]

  9  114 ms  133 ms  141 ms  tbr2-p012201.cgcil.ip.att.net [12.123.6.38]

10  136 ms  162 ms  174 ms  tbr2-cl7.sl9mo.ip.att.net [12.122.10.46]

11  127 ms  123 ms  136 ms  12.122.9.141

12  206 ms  147 ms  245 ms  tbr2-cl6.dlstx.ip.att.net [12.122.10.90]

13  151 ms  177 ms  151 ms  gar1-p370.dlrtx.ip.att.net [12.123.196.97]

14  114 ms  107 ms    96 ms  12.119.136.14

15    81 ms    82 ms    82 ms  vl32.dsr02.dllstx3.theplanet.com [70.85.127.62]

16    83 ms    83 ms    82 ms  vl41.dsr01.dllstx4.theplanet.com [70.85.127.83]

17    82 ms    80 ms    83 ms  gi1-0-1.car17.dllstx4.theplanet.com [67.18.116.69]

18  147 ms  173 ms  166 ms  85.67-18-179.reverse.theplanet.com [67.18.179.85]

Trace complete.

I have quest dsl now, and I am supposed to get 7000/864. I have ran TCP Optimaizer and sellected PPoE, but mine is PPoA is that a problem?

:::.. Download Stats ..:::

Connection is:: 1025 Kbps about 1 Mbps (tested with 2992 kB)

Download Speed is:: 125 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Mon Jan 09 2006 21:22:48 GMT-0600 (Central Standard Time)

Bottom Line:: 18X faster than 56K 1MB download in 8.19 sec

Diagnosis: May need help : running at only 42.62 % of your hosts average (qwest.net)

Validation Link:: https://testmy.net/stats/id-2GVWRIJYH

:::.. Upload Stats ..:::

Connection is:: 425 Kbps about 0.4 Mbps (tested with 2992 kB)

Upload Speed is:: 52 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Mon Jan 09 2006 21:24:42 GMT-0600 (Central Standard Time)

Bottom Line:: 8X faster than 56K 1MB upload in 19.69 sec

Diagnosis: May need help : running at only 89.29 % of your hosts average (qwest.net)

Validation Link:: https://testmy.net/stats/id-J6UQRK5D1

What can I do? I have odne all things int eh sticky topic, though, I read you are supposed to take off the limit for # of TCP connections form SP2, it's set to 10, but what should I put it to?

5000/256

Your connection is:  4418  Kbps      (about 4.4 Mbps)

You downloaded at: 539 kB/s

Your TRuSPEED: ^info^ 4727 Kbps :: 577 kB/s (7% overhead factored)

Bottom Line: You are running: 79 times faster than 56K and can download 1 megabyte in 1.9 second(s)

Diagnosis: Awesome! 20% + : 33.56 % faster than the average for host (mchsi.com)

Your connection is:  251  Kbps      (about 0.3 Mbps)

You uploaded at: 31 kB/s

Your TRuSPEED: ^info^ 269 Kbps :: 33 kB/s (7% overhead factored)

Bottom Line: You are running: 4 times faster than 56K and can upload 1 megabyte in 33.03 second(s)

Diagnosis: Looks Great : 14.09 % faster than the average for host (mchsi.com)

I am more concerned with my upload speed, but I want both faster if possible. I have a genric Linksys router  Is there anything I can do to make it faster? I just selected optimal settings TCP Optimizer and nothing more.