incognito

estimate = 14.65 based on packet size = 11Kbits, RTT = 739.4msec, and loss = 1.0E-6 The theoretical network limit is 14.65 Mbps The NDT server has a 8192.0 KByte buffer which limits the throughput to 86.55 Mbps Your PC/Workstation has a 124.0 KByte buffer which limits the throughput to 1.31 Mbps The network based flow control limits the throughput to 1.31 Mbps

:::.. Download Stats ..::: Connection is:: 1254 Kbps about 1.3 Mbps (tested with 2992 kB) Download Speed is:: 153 kB/s Tested From:: https://testmy.net (server1) Test Time:: Mon Feb 13 16:55:33 UTC+1100 2006 Bottom Line:: 22X faster than 56K 1MB download in 6.69 sec Diagnosis: Awesome! 20% + : 39.96 % faster than the average for host (on.net) Validation Link:: https://testmy.net/stats/id-B3PT6G2DV thats downloading the largest... but when downloading the SmarTest (in comparison to the first post i made) its the same... :::.. Download Stats ..::: Connection is:: 1170 Kbps about 1.2 Mbps (tested with 748 kB) Download Speed is:: 143 kB/s Tested From:: https://testmy.net (server2) Test Time:: Mon Feb 13 16:56:33 UTC+1100 2006 Bottom Line:: 21X faster than 56K 1MB download in 7.16 sec Diagnosis: Awesome! 20% + : 30.43 % faster than the average for host (on.net) Validation Link:: https://testmy.net/stats/id-BET4V7XL5

1464 Replied so my max MTU = 1492

Max MTU Pinging [63.217.30.70] with 40 bytes ->bytes=40 time=245ms TTL=52 Pinging [63.217.30.70] with 750 bytes ->bytes=750 time=277ms TTL=52 Pinging [63.217.30.70] with 1125 bytes ->bytes=1125 time=292ms TTL=52 Pinging [63.217.30.70] with 1312 bytes ->bytes=1312 time=298ms TTL=52 Pinging [63.217.30.70] with 1406 bytes ->bytes=1406 time=302ms TTL=52 Pinging [63.217.30.70] with 1453 bytes ->bytes=1453 time=304ms TTL=52 Pinging [63.217.30.70] with 1476 bytes -> ..fragmented Pinging [63.217.30.70] with 1465 bytes ->IcmpSendEcho(): 0

and im using pppoe

where am i looking... lol sorry im a newb

Nope it didnt change... my modem stays on tho... so should i reboot the modem as well ? or is it only adjusting my registry ?

Statistics from Nitro ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Full Duplex mode No network congestion discovered. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 397.94 msec; the Packet size = 1420 Bytes; and No packet loss - but packets arrived out-of-order 0.38% of the time This connection is receiver limited 88.53% of the time. Increasing the the client's receive buffer (62.0 KB) will improve performance This connection is network limited 11.44% of the time. Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: OFF More Details... WEB100 Kernel Variables: Client: localhost/127.0.0.1 AckPktsIn: 1034 AckPktsOut: 0 BytesRetrans: 0 CongAvoid: 0 CongestionOverCount: 0 CongestionSignals: 0 CountRTT: 1030 CurCwnd: 65320 CurMSS: 1420 CurRTO: 630 CurRwinRcvd: 63900 CurRwinSent: 16304 CurSsthresh: 2147483647 DSACKDups: 0 DataBytesIn: 0 DataBytesOut: 1529340 DataPktsIn: 0 DataPktsOut: 1077 DupAcksIn: 4 ECNEnabled: 0 FastRetran: 0 MaxCwnd: 65320 MaxMSS: 1420 MaxRTO: 790 MaxRTT: 530 MaxRwinRcvd: 63900 MaxRwinSent: 16304 MaxSsthresh: 0 MinMSS: 1420 MinRTO: 520 MinRTT: 190 MinRwinRcvd: 61060 MinRwinSent: 16304 NagleEnabled: 1 OtherReductions: 0 PktsIn: 1034 PktsOut: 1077 PktsRetrans: 0 X_Rcvbuf: 103424 RcvWinScale: 2147483647 SACKEnabled: 3 SACKsRcvd: 2 SendStall: 0 SlowStart: 44 SampleRTT: 400 SmoothedRTT: 400 X_Sndbuf: 103424 SndWinScale: 2147483647 SndLimTimeRwin: 8945729 SndLimTimeCwnd: 1156375 SndLimTimeSender: 2621 SndLimTransRwin: 1 SndLimTransCwnd: 1 SndLimTransSender: 1 SndLimBytesRwin: 1402960 SndLimBytesCwnd: 126380 SndLimBytesSender: 0 SubsequentTimeouts: 0 SumRTT: 409880 Timeouts: 0 TimestampsEnabled: 0 WinScaleRcvd: 2147483647 WinScaleSent: 2147483647 DupAcksOut: 0 StartTimeUsec: 475756 Duration: 10107423 c2sData: 2 c2sAck: 2 s2cData: 2 s2cAck: 2 half_duplex: 0 link: 100 congestion: 0 bad_cable: 0 mismatch: 0 spd: 0.00 bw: 27.22 loss: 0.000001000 avgrtt: 397.94 waitsec: 0.00 timesec: 10.00 order: 0.0039 rwintime: 0.8853 sendtime: 0.0003 cwndtime: 0.1144 rwin: 0.4875 swin: 0.7891 cwin: 0.4984 rttsec: 0.397942 Sndbuf: 103424 aspd: 6.14914 Checking for mismatch on uplink (speed > 50 [0>50], (xmitspeed < 5) [0.21<5] (rwintime > .9) [0.88>.9], (loss < .01) [1.0E<.01] Checking for excessive errors condition (loss/sec > .15) [1.0E>.15], (cwndtime > .6) [0.11>.6], (loss < .01) [1.0E<.01], (MaxSsthresh > 0) [0>0] Checking for 10 Mbps link (speed < 9.5) [0<9.5], (speed > 3.0) [0>3.0] (xmitspeed < 9.5) [0.21<9.5] (loss < .01) [1.0E<.01], (mylink > 0) [3.0>0] Checking for Wireless link (sendtime = 0) [3.0E=0], (speed < 5) [0<5] (Estimate > 50 [27.22>50], (Rwintime > 90) [0.88>.90] (RwinTrans/CwndTrans = 1) [1/1=1], (mylink > 0) [3.0>0] Checking for DSL/Cable Modem link (speed < 2) [0<2], (SndLimTransSender = 0) [1=0] (SendTime = 0) [3.0E-4=0], (mylink > 0) [3.0>0] Checking for half-duplex condition (rwintime > .95) [0.88>.95], (RwinTrans/sec > 30) [0.1>30], (SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10] Checking for congestion (cwndtime > .02) [0.11>.02], (mismatch = 0) [0=0] (MaxSsthresh > 0) [0>0] estimate = 27.22 based on packet size = 11Kbits, RTT = 397.94msec, and loss = 1.0E-6 The theoretical network limit is 27.22 Mbps The NDT server has a 101.0 KByte buffer which limits the throughput to 1.98 Mbps Your PC/Workstation has a 62.0 KByte buffer which limits the throughput to 1.22 Mbps The network based flow control limits the throughput to 1.25 Mbps Client Data reports link is 'T1', Client Acks report link is 'T1' Server Data reports link is 'T1', Server Acks report link is 'T1'

1.1 megabits per second Communications 1.1 megabits per second Storage 132.8 kilobytes per second 1MB file download 7.7 seconds Subjective rating Good

MTU = 1460 MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings. MSS = 1420 Maximum useful data in each packet = 1420, which equals MSS. Default TCP Receive Window (RWIN) = 63900 RWIN Scaling (RFC1323) = 0 bits Unscaled TCP Receive Window = 63900 RWIN is a multiple of MSS Other RWIN values that might work well with your current MTU/MSS: 522560 (MSS x 46 * scale factor of 261280 (MSS x 46 * scale factor of 4) 130640 (MSS x 46 * scale factor of 2) 65320 (MSS x 46) bandwidth * delay product (Note this is not a speed test): Your TCP Window limits you to: 2556 kbps (319.5 KBytes/s) @ 200ms Your TCP Window limits you to: 1022.4 kbps (127.8 KBytes/s) @ 500ms MTU Discovery (RFC1191) = ON Time to live left = 39 hops TTL value is ok. Timestamps (RFC1323) = OFF Selective Acknowledgements (RFC2018) = ON IP type of service field (RFC1349) = 00000000 (0) TCP/Web100 Network Diagnostic Tool v5.3.3d click START to begin Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done running 10s outbound test (client to server) . . . . . 212.61Kb/s running 10s inbound test (server to client) . . . . . . 1.22Mb/s Your PC is connected to a Cable/DSL modem Information: The receive buffer should be 141.78 Kbytes to maximize throughput

ive had a look at some posted in these forums, still similar speed tho :-s around 1200 kbps

:::.. Download Stats ..::: Connection is:: 1171 Kbps about 1.2 Mbps (tested with 748 kB) Download Speed is:: 143 kB/s Tested From:: https://testmy.net (server2) Test Time:: Mon Feb 13 15:48:11 UTC+1100 2006 Bottom Line:: 21X faster than 56K 1MB download in 7.16 sec Diagnosis: Awesome! 20% + : 31.13 % faster than the average for host (on.net) Validation Link:: https://testmy.net/stats/id-A91P6BU7Z i should be running close to 1500 kbps... i know i live in australia but even so :-s what info do you need to help my settings ?

Tweaks - . Your Tweakable Settings: Receive Window (RWIN): 256960 Window Scaling: 2 Path MTU Discovery: ON RFC1323 Window Scaling: ON RFC1323 Time Stamping: OFF Selective Acks: ON MSS requested: 1460 TTL: unknown TTL remaining: 47 Notes and recommendations: Choose RWIN between 5840 and 13140 (FAQ #586) download/use DRTCP .. (FAQ #578) Read the tweak FAQ ------------------------------------------------- what about those recommendations ?

http://img119.exs.cx/img119/7084/ati8ev.png

i also ran crap cleaner and now i have a missing file when i reboot http://img161.exs.cx/my.php?loc=img161&image=dll9qy.png

http://www.freewebs.com/digital_bart/ATI.bmp is what is in Display System : Processor - Intel® Pentium® 4 CPU 3.00 GHz (2 CPUs) Memory - 512 Mb RAM

Service - Telstra BigPond Broadband Australia ------------------------------------------------- Advertised Speed - 512/128 ------------------------------------------------- Tweaks - . Your Tweakable Settings: Receive Window (RWIN): 256960 Window Scaling: 2 Path MTU Discovery: ON RFC1323 Window Scaling: ON RFC1323 Time Stamping: OFF Selective Acks: ON MSS requested: 1460 TTL: unknown TTL remaining: 47 Notes and recommendations: Choose RWIN between 5840 and 13140 (FAQ #586) download/use DRTCP .. (FAQ #578) Read the tweak FAQ ------------------------------------------------- Ping Check - Log created by AutoCheck.bat on Tue 04/05/2005 Pinging testmy.net [67.19.36.6] with 32 bytes of data: Reply from 67.19.36.6: bytes=32 time=207ms TTL=44 Reply from 67.19.36.6: bytes=32 time=209ms TTL=44 Reply from 67.19.36.6: bytes=32 time=209ms TTL=44 Reply from 67.19.36.6: bytes=32 time=208ms TTL=44 Ping statistics for 67.19.36.6: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 207ms, Maximum = 209ms, Average = 208ms Ping Complete. Tracing route to testmy.net [67.19.36.6] over a maximum of 30 hops: 1 2 ms 1 ms 1 ms BigPond.bigpond [10.0.0.138] 2 18 ms 19 ms 21 ms 172.31.146.24 3 24 ms 23 ms 23 ms 172.31.171.38 4 20 ms 19 ms 19 ms CPE-61-9-194-1.nsw.bigpond.net.au [61.9.194.1] 5 20 ms 19 ms 19 ms 61.9.193.6 6 20 ms 19 ms 19 ms GigabitEthernet3-1.pit2.Sydney.telstra.net [139.130.94.97] 7 18 ms 19 ms 21 ms GigabitEthernet5-2.pic1.Sydney.telstra.net [203.50.12.29] 8 20 ms 19 ms 19 ms GigabitEthernet10-2.ken-core4.Sydney.telstra.net [203.50.12.126] 9 20 ms 19 ms 19 ms 10GigabitEthernet3-0.pad-core4.Sydney.telstra.net [203.50.6.86] 10 20 ms 19 ms 19 ms GigabitEthernet2-2.syd-core01.Sydney.net.reach.com [203.50.13.38] 11 167 ms 169 ms 167 ms i-12-3.wil-core02.net.reach.com [202.84.249.205] 12 246 ms 247 ms 247 ms i-2-0.dal-core01.net.reach.com [202.84.143.66] 13 232 ms 232 ms 230 ms level3.Dal-core01.net.reach.com [134.159.63.142] 14 207 ms 208 ms 208 ms ge-1-2-52.car3.Dallas1.Level3.net [4.68.122.38] 15 210 ms 210 ms 212 ms 4.78.220.10 16 209 ms 212 ms 210 ms dist-vlan32.dsr3-1.dllstx3.theplanet.com [70.85.127.61] 17 211 ms 212 ms 437 ms dist-vlan41.dsr2-1.dllstx4.theplanet.com [70.85.127.83] 18 213 ms 212 ms 212 ms gig1-0-1.tp-car9-1.dllstx4.theplanet.com [67.18.116.69] 19 213 ms 212 ms 210 ms 6.67-19-36.reverse.theplanet.com [67.19.36.6] Trace complete. -------------------------------------------------

i know ive posted this before but... :::.. Download Stats ..::: Connection is:: 422 Kbps about 0.4 Mbps (tested with 579 kB) Download Speed is:: 51 kB/s Tested From:: http://www.testmy.net/ Test Time:: Tue Apr 5 18:55:55 UTC+1000 2005 Bottom Line:: 8X faster than 56K 1MB download in 20.08 sec Diagnosis: May need help : running at only 27.89 % of your hosts average (net.au) Validation Link:: https://testmy.net/stats/id-UX7G6OH8A :::.. Upload Stats ..::: Connection is:: 78 Kbps about 0.1 Mbps (tested with 97 kB) Upload Speed is:: 10 kB/s Tested From:: http://www.testmy.net/ Test Time:: Tue Apr 5 18:59:54 UTC+1000 2005 Bottom Line:: 1X faster than 56K 1MB upload in 102.4 sec Diagnosis: May need help : running at only 64.46 % of your hosts average (net.au) Validation Link:: https://testmy.net/stats/id-ABN49EZCY which should be 512/128 Kbps and running at only 28%/65% ? ive been through the tweaking pages and dont understand much, so personal assistance is probably required... <snip>I dont think you want your email address here...

i think im having probs ATI, which i believe is my video card program... going from c-s (half-life) to the desktop it comes up with an error and now the colour/sharpness of everything has changed... also this is a newish computer (just bought in january) i would like some recommendations on how to keep it up to scratch as i dont wish to have problems with it i am such a newbie at computers... that if you need info off me you'll have to explain how i get that... i also wanna know how i can get a view of all my processors running so i can post that to show if anything is wrong with it... thanks

should i uninstall Norton 2005 and ZoneAlarm ? you got any recommendations for better progs ? is spybot s & d a good spyware remover ? or adaware ?

nah you told me php and thanks guys il try it out

how do i know if i have an ethernet port on my pc ? i have the cable that attaches the modem to the pc but i dunno if i have a port for it

im on adsl and i dont have an ethercard

wired via USB

:::.. Download Stats ..::: Connection is:: 425 Kbps about 0.4 Mbps (tested with 386 kB) Download Speed is:: 52 kB/s Tested From:: http://www.testmy.net/ Test Time:: Sat Mar 19 16:05:30 UTC+1100 2005 Bottom Line:: 8X faster than 56K 1MB download in 19.69 sec Diagnosis: May need help : running at only 34.36 % of your hosts average (net.au) Validation Link:: https://testmy.net/stats/id-N29MF6BD7 :::.. Upload Stats ..::: Connection is:: 77 Kbps about 0.1 Mbps (tested with 97 kB) Upload Speed is:: 9 kB/s Tested From:: http://www.testmy.net/ Test Time:: Sat Mar 19 16:06:12 UTC+1100 2005 Bottom Line:: 1X faster than 56K 1MB upload in 113.78 sec Diagnosis: May need help : running at only 65.25 % of your hosts average (net.au) Validation Link:: https://testmy.net/stats/id-ISR1D0BWU