rikkkki

Hi php! Oh, I've tried at least 12 different drives, new ones, old ones. All sorts of cables new and old, plugged in every which way but vertical I found an exact duplicate mobo from Interloper and figured that would fix it, not. I also have the very latest bios version

available for the machine. There is not one thing in there now that was in there when I orginally bought it new, except for the psu. That's why I bought new one today to try which is about as far a stretch as you can get . There has to be an explanation. I've got to get it to boot or I cannot properly install an OS in the correct way, I've done it but it's tough(with win95) This whole trip was for nostalgia but now it's kinda getting "personal"  gotta for now, cheers, Dave

Me again. For grins a giggles, I just bought a brand new extact match psu out of CA, retail!!  what the hay, it's the ONLY thing that I haven't replaced 

Seeyabye,cheers

Hey all, long time no yak I have a good one here. very brief for now, have to go to work I am trying to get my very first puter to work and I cannot get the floppy to work at all I have replaced EVERYTHING except the power supply during this entire process. The drive is getting 12 and 5v , it does run when you put in one of those disk cleaner gizmos that spin? It is an AT setup. Could there be a connection in the power supply to motherboard that could be bad? Device mgr says it's OK, my computer shows it, but can't open, says "A is not accessible", fdc controller is enabled in the bios, tried loading setup defaults, blah blah blah Gotta go till next time, cheers

Sorry guys. I just read my entry from Sat and it doesn't make too much to me either  I was REALLY tired. Anyhow, I was running a repair  on XP and missed the F6 key during the beginning of the process of the repair. I installed a new mobo so I had to run the repair. The F6 key is what you hit so that the install allows you to put in the floppy disc at a certain time to install the third party sata drivers during the repair. I missed the F6 and continued with the repair anyhow. I have only two sata drives, one Plextor burner and my HD. Now during post these drives are listed as being IDE's and my system thinks it's a USB or something cause I'm stuck with the icon in my task tray that tells me it's 'safe to remove hardware'. I know I can re-install/repair XP again, but it's a pain doing the Activation thing, especially when you have to talk to a machine and rattle off 54 numbers and letters, and THEN talk to a person to get re-activated.    I was just trying to figure out a way of installing the third party drivers whithout having to run another repair   

Well, one of the drives is my main hd and the other is my plextor burner. My sata drivers are on a floppy that came with my mobo that make the sata stuff work. This has happened before but I can't remember what I did to fix it. I don't know if I can just unpug my hd and plug it back in.

I'M BACK!! Hey troops!! How's things? Got a slight problem going here. I put a new mobo in today and missed the "F6" button during re-install, repair of XP for my Sata drivers and now the system is not recognizing my two drives as being Sata drives, duh. And now I have the ever-present icon in my task tray "safely remove hardware"  They are listed during post as being third and fourth IDE's. My question is, can I install these drivers WITHOUT running another repair? 

PS. I'm getting tired of talking to a machine and reading  54 numbers to it and THEN getting a real live person  :haha:  Activation wise.

The mods have decided to sticky this thread.. you guys have worked hard and we dont want this work to go to waste..

Well I guess it's learning time again. Sticky this thread? Somehow draw other people to it? Just a guess. I like it anyhow.It has been alot of work but I wouldn't have been able to go this far without cak46 and his desire to not let a machine beat us out. Ya know, I'm not really excited about having done this, cause the old one is right here on the same disc! I mean, "great, I have an OS that works good", but nothing has changed with the old one. The problem still lurks. I suppose that if someone came up with an idea from time to time, that I could boot into the other OS to try out the suggestion?

Cholla, thanks for the kind thoughts. Maybe we can consider this "over but not over"? 

Thank you php. I almost feel like I've let the viewers down. I know this can't go on forever, but at the same there may have been some people out there that were depending on a "fix find". If any of these people DO find something (fix) out there, then maybe they could post. It was tough though, not being a vurus. Again thank you for the kudos. Maybe this won't be in vain?

Well EVERYBODY

hottiecakes. You might take a look in your event viewer and check what sort of errors you are getting around the time that this happens. Look in your your event viewer/ "system" first, and then you can check your "security", and then "application" logs. Right click on "my comptuer" click "manage" then double click on "event viewer" and your'e there. good luck.

Welcome aboard Hottiecakes. I'll post my error message so you can compare. I got the 60 sec "doom" only once at the very beginning of all this mess, two months ago!! If I click on it right after it comes up, it will reboot. If you leave it alone for awhile, then you can delete it and your'e OK. If your'e getting the same error I am WITH the 60 sec "doom", that sounds like a virus, which I don't seem to have. I do beleive that the LSA shell is Local Security Autority and that is part of the Lsass.exe. It is in your Windows/system 32 folder. The best thing for you to do, although painful, is to start reading this thread from the beginning to get an idea of what we have already done. Many things have been tried, to no avail. If you have a virus, then it should be an easy fix.For grins and giggles, try running a thorough anti-virus scan in safe mode. Then go to your anti-virus website and download all "fixes" that they may have for the different viruses. Mine at the time was McAfee. They have the "Stinger" tool that you can try. I'm getting wordy here. I'm a really tired, sorry, but it would really help for you to read this thread. There are many items that could possibly help you. cak46 has been with me through this whole mess. Anyhow, stay tuned, there may be more.

Well, I'm back. I've been fighting this installer thing. I'm following what MS is saying and some of the cmd prompts are not working on my system. Something else is going on, I think. I tried to re-register Windows Update Components and the

"Regsvr32 wuapi.dll" wouldn't work. I couldn't re-configure the proxy settings, either. So the ball is back in their court now. Nighty nite for me and I'm sure by now your'e sawing logs, large Pine ones at that  :haha: Catch ya later on the flip-flop Cheers 

:haha:

Bath Iron Works just had a layoff.

Hi cak46. Well, that didn't do it.  :cry: We're working longer hours now  so it will be a little later before I start posting. A fourth hull is coming over from Westport as we speak, for us to build. That's makes four in our building !! It's about an hour and a half trip"across the pond".  We need more people!!!  Know anybody with boat building experience that wants to live in the beautiful Pacific Northwest? Many postions are open.

Lot's of pine trees, too  :haha:

How'd it go?

Ya, it's in the Admin group, per PM. Will reboot now. The other post was in the users group.

Well, I'm not sure we did anything. What I will post is the same info as it was last night, in the Groups/users catagory. Anyhow, take a look.

It worked. Here goes.

So it appears that I am a user all the way? I'm not in a group at all?

Now we're gettin' somewhere.

Ya know, in Norway, they used to build their ships and then seal all the "joints" with Sap  :haha: No wonder they were such great seamen  :haha: The stckier the better, I guess, huh? 

click on "find now" then.... well.... you know......

:haha: Gotcha More Sap, that's all it takes  :haha:

Leave it defaulted to Martine.

Here's advanced.

Locations?