MYRIAGON

Damn....Had to put 4 bullets in that threads head

pitbull481

We got it going it was just he had NTFS on the hard drive and we had to get rid of that first so we could get FAT32 going.

Plus it's only a 133 Mhz system so I can imagine xp was a bit too much for it.

I'll PM you

I may be wrong here , but it sounds like you don't have a complete win98 cd or it has to be setup before burning like a .rar file or something like that.

If you want I could send you a copy over AIM I would just send the cab files zipped into a win98 folder and it would probably be about 120 MB

Let me know.

this is kind of scary because there should be 101 files but we'll see what happens.

ok......At the E: prompt try copy *.* C:win98

did you burn that copy from an image ?

at the E: prompt type" dir "and see if it has a win98 folder listed there

prompt type CD win98 that will bring up the win98 folder then type" copy *.* C:win98 " and hit enter, when it's done you can take the cd out of the drive and the floppy out and restart the PC.

This time it will boot to the C: prompt without the boot disk.

Just type CD win98 and then type" setup /ie /iv " and hit enter.

That should get it going,

I know this seems quite complicated and a hassle but it's not that bad, and it will be better than just using the CD rom to load the OS,

Any questions just ask.hope it goes OK.

at the C: prompt try to just type E: then enter then type cd win98 and go from there

Hit Ctrl/alt/del at the same time and that should restart your PC and boot up and make sure you choose 1 for support cd rom and try again.at the C: prompt try to just type E: then enter then type cd win98 and go from there

OK now try from this point.

at the C: prompt type" md win98 "and hit enter.

Then at the C: prompt type CD E: that will bring up the cd rom, now at the E: prompt type CD win98 that will bring up the win98 folder then type" copy *.* C:win98 " and hit enter, when it's done you can take the cd out of the drive and the floppy out and restart the PC.

This time it will boot to the C: prompt without the boot disk.

Just type CD win98 and then type" setup /ie /iv " and hit enter.

That should get it going,

I know this seems quite complicated and a hassle but it's not that bad, and it will be better than just using the CD rom to load the OS,

Any questions just ask.hope it goes OK.

when you ran format C: /s did that work OK ?

sounds like the partition didn't take for some reason.

Were you able to delete the partition earlier ?

And after restart did you go to fdisk again and setup a new partition ?

Reboot and choose #1 for support for CD rom and try again.

If you only have the one H.D. and only 1 partition on that H.D. then the Cd rom should be on E:

when you booted up did you choose support for CD rom this time ?

Do you have just 1 H.D. ?

After you make the boot disk put it in the PC you are going to load win98 on, then start the pc and it should boot to the disk.

choose not to install CD rom drivers and press enter, after a bit it will come up with the A: prompt, then type fdisk and it will come to a screen asking if you want it large type Y for yes and enter.

Then delete that partition then hit escape 2times then restart the PC and do the same as before only this time you will want to setup a new partition when it is done it will ask if you want to use all allocated space or something like that (it's hard doing this with it not in front of me) it should already have a "Y" so just hit enter, when it's done hit esc 2 times and restart PC again.

this time choose to install CD rom drivers hit enter then at the A: prompt type" format C: /s " when it is done you can enter a volume name up to 11 characters or leave blank and press enter.

I like to put the setup files on the hard drive so if you want to do that, at the C: prompt type" md win98 "and hit enter.

Then at the C: prompt type CD E: that will bring up the cd rom, now at the E: prompt type CD win98 that will bring up the win98 folder then type" copy *.* C:win98 " and hit enter, when it's done you can take the cd out of the drive and the floppy out and restart the PC.

This time it will boot to the C: prompt without the boot disk.

Just type CD win98 and then type" setup /ie /iv " and hit enter.

That should get it going,

I know this seems quite complicated and a hassle but it's not that bad, and it will be better than just using the CD rom to load the OS,

Any questions just ask.hope it goes OK.

EDIT: If fdisk cannot delete the partition you may have to put the winxp cd in first and go in and delete the ntfs partition and any other partitions you have after it does that just restart the PC and start over with the directions above.

yes....

use the boot disk so you can fdisk and format the drive then you use it to add cd rom drivers from there you can bring up the cd and run setup.

I'll put a copy of the boot disk so you can download it, all you need is a formatted floppy in your floppy drive. extract the file from the zip and click on the file and it will make a boot disk for you.

Hello Pitbull.

Do you have a win98 boot disk ?

69RAT....I'm not sure if you can get online with your infected PC, but trend micro has a online scanner and virus removal here--------> http://housecall.trendmicro.com/

Hope that helps you. 

Do you want the IP that Comcast has given you?

Your levels look pretty good. I wonder why they haven't upgraded you to 256QAM yet though.

I think at the time he captured that he was on an older modem, I believe in another thread he said he got a new modem today.

When I upgraded to the 6/768 they upgraded my modem from a SB4200 to the SB5120 Motorola, and it reflects 256QAM ......

:::.. Download Stats ..:::

Connection is:: 6337 Kbps about 6.3 Mbps (tested with 12160 kB)

Download Speed is:: 774 kB/s

Tested From:: https://testmy.net/ (server2)

Test Time:: Sat Jul 9 12:31:27 EDT 2005

Bottom Line:: 113X faster than 56K 1MB download in 1.32 sec

Diagnosis: Awesome! 20% + : 75.54 % faster than the average for host (comcast.net)

Validation Link:: https://testmy.net/stats/id-5HQ4WPVEY

------------------------------------------------------------------------------------------------------------------------------------

:::.. Upload Stats ..:::

Connection is:: 741 Kbps about 0.7 Mbps (tested with 579 kB)

Upload Speed is:: 90 kB/s

Tested From:: https://testmy.net/ (server1)

Test Time:: Sat Jul 9 12:32:55 EDT 2005

Bottom Line:: 13X faster than 56K 1MB upload in 11.38 sec

Diagnosis: Awesome! 20% + : 116.03 % faster than the average for host (comcast.net)

Validation Link:: https://testmy.net/stats/id-JW40B1FI3