Up Load??

[cheltrack]

i need help.....i have comcast this is my download numbers

Download Stats ..:::

Connection is:: 6211 Kbps about 6.2 Mbps (tested with 5983 kB)

Download Speed is:: 758 kB/s

Tested From:: https://testmy.net (server2)

Test Time:: Sun Feb 5 14:20:05 EST 2006

Bottom Line:: 111X faster than 56K 1MB download in 1.35 sec

Diagnosis: Awesome! 20% + : 30.48 % faster than the average for host (comcast.net)

Validation Link:: https://testmy.net/stats/id-4OEP6LZSD

i figure that is good but here are my UPLOAD numbers

:::.. Upload Stats ..:::

Connection is:: 112 Kbps about 0.1 Mbps (tested with 97 kB)

Upload Speed is:: 14 kB/s

Tested From:: https://testmy.net (server2)

Test Time:: Sun Feb 5 14:22:25 EST 2006

Bottom Line:: 2X faster than 56K 1MB upload in 73.14 sec

Diagnosis: May need help : running at only 32.37 % of your hosts average (comcast.net)

Validation Link:: https://testmy.net/stats/id-5ON1FCS6B

My question is 1. Is this normal

2. if not how do i fix it

[trogers]

Hi,

Welcome to this forum. Before we can assist you we need some info on your comp's present setup. Please carry out the test below and post your results. In the second link, you need to post the reports from both STATISTICS and MORE DETAILS sections:

https://www.speedguide.net/analyzer.php

http://nitro.ucsc.edu/

[cheltrack]

TCP properties for IP = xxxxxxxxxxx()

Browser/OS = Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.6) Gecko/20040113

Notes: Read the Analyzer FAQ if the above is not your IP address.

TCP options string = 020405b401010402

MTU = 1500

MTU is fully optimized for broadband.

MSS = 1460

Maximum useful data in each packet = 1460, which equals MSS.

Default TCP Receive Window (RWIN) = 65535

RWIN Scaling (RFC1323) = 0 bits

Unscaled TCP Receive Window = 65535

Note: TCP 1323 Options need to be enabled for RWIN over 2^16 (65535). Windows 9x might also need the MS Vtcp386 fix.

For optimum performance, consider changing RWIN to a multiple of MSS.

Other values for RWIN that might work well with your current MTU/MSS:

513920 (MSS x 44 * scale factor of

256960 (MSS x 44 * scale factor of 4)

128480 (MSS x 44 * scale factor of 2)

64240 (MSS x 44)

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2621.4 Kbps (327.675 KBytes/s) @ 200ms

Your TCP Window limits you to: 1048.56 Kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 116 hops

TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00100000 (32)

Precedence (priority) = 001 (priority)

Delay = 0 (normal delay)

Throughput = 0 (normal throughput)

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

No network congestion discovered.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 105.53 msec; the Packet size = 1460 Bytes; and

No packet loss - but packets arrived out-of-order 11.58% of the time

This connection is receiver limited 88.62% of the time.

This connection is network limited 11.35% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: OFF

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Information: Network Address Translation (NAT) box is modifying the Client's IP address

Server says [xxxxxxxxxx] but Client says [xxxxxxxx

WEB100 Kernel Variables:

Client: localhost/127.0.0.1

AckPktsIn: 1649

AckPktsOut: 0

BytesRetrans: 0

CongAvoid: 0

CongestionOverCount: 0

CongestionSignals: 0

CountRTT: 1458

CurCwnd: 65700

CurMSS: 1460

CurRTO: 330

CurRwinRcvd: 65535

CurRwinSent: 16304

CurSsthresh: 2147483647

DSACKDups: 0

DataBytesIn: 0

DataBytesOut: 5758240

DataPktsIn: 0

DataPktsOut: 3944

DupAcksIn: 191

ECNEnabled: 0

FastRetran: 0

MaxCwnd: 65700

MaxMSS: 1460

MaxRTO: 360

MaxRTT: 200

MaxRwinRcvd: 65535

MaxRwinSent: 16304

MaxSsthresh: 0

MinMSS: 1460

MinRTO: 300

MinRTT: 90

MinRwinRcvd: 65535

MinRwinSent: 16304

NagleEnabled: 1

OtherReductions: 0

PktsIn: 1649

PktsOut: 3944

PktsRetrans: 0

X_Rcvbuf: 103424

RcvWinScale: 2147483647

SACKEnabled: 3

SACKsRcvd: 0

SendStall: 0

SlowStart: 43

SampleRTT: 100

SmoothedRTT: 100

X_Sndbuf: 103424

SndWinScale: 2147483647

SndLimTimeRwin: 8904910

SndLimTimeCwnd: 1140432

SndLimTimeSender: 2588

SndLimTransRwin: 1

SndLimTransCwnd: 1

SndLimTransSender: 1

SndLimBytesRwin: 5524640

SndLimBytesCwnd: 233600

SndLimBytesSender: 0

SubsequentTimeouts: 0

SumRTT: 153870

Timeouts: 0

TimestampsEnabled: 0

WinScaleRcvd: 2147483647

WinScaleSent: 2147483647

DupAcksOut: 0

StartTimeUsec: 314675

Duration: 10050072

c2sData: 2

c2sAck: 2

s2cData: 9

s2cAck: 3

half_duplex: 0

link: 100

congestion: 0

bad_cable: 0

mismatch: 0

spd: 0.00

bw: 105.55

loss: 0.000001000

avgrtt: 105.53

waitsec: 0.00

timesec: 10.00

order: 0.1158

rwintime: 0.8862

sendtime: 0.0003

cwndtime: 0.1135

rwin: 0.5000

swin: 0.7891

cwin: 0.5013

rttsec: 0.105535

Sndbuf: 103424

aspd: 12.78382

Checking for mismatch on uplink

(speed > 50 [0>50], (xmitspeed < 5) [0.37<5]

(rwintime > .9) [0.88>.9], (loss < .01) [1.0E<.01]

Checking for excessive errors condition

(loss/sec > .15) [1.0E>.15], (cwndtime > .6) [0.11>.6],

(loss < .01) [1.0E<.01], (MaxSsthresh > 0) [0>0]

Checking for 10 Mbps link

(speed < 9.5) [0<9.5], (speed > 3.0) [0>3.0]

(xmitspeed < 9.5) [0.37<9.5] (loss < .01) [1.0E<.01], (mylink > 0) [3.0>0]

Checking for Wireless link

(sendtime = 0) [3.0E=0], (speed < 5) [0<5]

(Estimate > 50 [105.55>50], (Rwintime > 90) [0.88>.90]

(RwinTrans/CwndTrans = 1) [1/1=1], (mylink > 0) [3.0>0]

Checking for DSL/Cable Modem link

(speed < 2) [0<2], (SndLimTransSender = 0) [1=0]

(SendTime = 0) [3.0E-4=0], (mylink > 0) [3.0>0]

Checking for half-duplex condition

(rwintime > .95) [0.88>.95], (RwinTrans/sec > 30) [0.1>30],

(SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10]

Checking for congestion

(cwndtime > .02) [0.11>.02], (mismatch = 0) [0=0]

(MaxSsthresh > 0) [0>0]

estimate = 105.55 based on packet size = 11Kbits, RTT = 105.53msec, and loss = 1.0E-6

The theoretical network limit is 105.55 Mbps

The NDT server has a 101.0 KByte buffer which limits the throughput to 7.47 Mbps

Your PC/Workstation has a 63.0 KByte buffer which limits the throughput to 4.73 Mbps

The network based flow control limits the throughput to 4.75 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet'

Reliability = 0 (normal reliability)

Cost = 0 (normal cost)

Check bit = 0 (correct, 8th checking bit must be zero)

DiffServ (RFC 2474) = CS1 001000 ( - class 1 (RFC 2474). Similar forwarding behavior to the ToS Precedence field.

[trogers]

Try this ccs file.

[cheltrack]

i am not sure how to try it?????sorry  iam pretty new to this.......i try down loading it but it doest work????

[trogers]

You have to download the Cablenut Adjuster program from www.cablenut.com to open a ccs file. The program is free. After opening the ccs file, click 'Save to registry', exit and reboot your comp.

Then carry out speed test using the LARGEST file.

[cheltrack]

:::.. Upload Stats ..:::

Connection is:: 323 Kbps about 0.3 Mbps (tested with 2992 kB)

Upload Speed is:: 39 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Sun Feb 05 2006 15:48:19 GMT-0500 (Eastern Standard Time)

Bottom Line:: 6X faster than 56K 1MB upload in 26.26 sec

Diagnosis: 90% + Okay : running at 93.35 % of your hosts average (comcast.net)

Validation Link:: https://testmy.net/stats/id-KF1347ABR

a lot better thanks!!!!!

so i need to leave those programs alone or can i now uninstall them

[trogers]

Just leave them be. You may need to use them again when you upgrade your bandwidth.