Jump to content
Sign in to follow this  
CP

Diagnosis: DEFINATELY need help

Recommended Posts

W/O ZA and Anti Virus:

2006-02-11 18:11:48 EST: 712 / 132

Your download speed : 712 Kbps or 89 kB/sec.

Your upload speed : 132 Kbps or 16.6 kB/sec.

===================================

Also:

:::.. Download Stats ..:::

Connection is:: 737 Kbps about 0.7 Mbps (tested with 748 kB)

Download Speed is:: 90 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Sat Feb 11 15:13:07 PST 2006

Bottom Line:: 13X faster than 56K 1MB download in 11.38 sec

Diagnosis: May need help : running at only 15.65 % of your hosts average (verizon.net)

Validation Link:: https://testmy.net/stats/id-V5T2L6E04

and:

============================

:::.. Upload Stats ..:::

Connection is:: 137 Kbps about 0.1 Mbps (tested with 97 kB)

Upload Speed is:: 17 kB/s

Tested From:: https://testmy.net (server1)

Test Time:: Sat Feb 11 15:13:42 PST 2006

Bottom Line:: 2X faster than 56K 1MB upload in 60.24 sec

Diagnosis: May need help : running at only 21.85 % of your hosts average (verizon.net)

Validation Link:: https://testmy.net/stats/id-G9XZ2U708

====================

Trace:

tracert www.testmy.net

Tracing route to www.testmy.net [67.18.179.85]

over a maximum of 30 hops:

  1    19 ms    18 ms    18 ms  L100.DSL-34.LSANCA.verizon-gni.net [71.104.202.1

]

  2    19 ms    20 ms    19 ms  130.81.35.90

  3    22 ms    20 ms    21 ms  so-7-0-0-0.PEER-RTR2.LAX80.verizon-gni.net [130.

81.17.151]

  4    21 ms    21 ms    21 ms  so-4-3-0-0.gar2.LosAngeles1.Level3.net [4.78.202

.29]

  5    21 ms    20 ms    23 ms  ae-2-54.bbr2.LosAngeles1.Level3.net [4.68.102.97

]

  6    52 ms    55 ms    52 ms  as-1-0.bbr2.Dallas1.Level3.net [64.159.0.245]

  7    51 ms    55 ms    52 ms  ae-13-53.car3.Dallas1.Level3.net [4.68.122.79]

  8    53 ms    53 ms    53 ms  4.78.221.146

  9    54 ms    54 ms    56 ms  vl32.dsr02.dllstx3.theplanet.com [70.85.127.62]

10    54 ms    55 ms    55 ms  vl42.dsr02.dllstx4.theplanet.com [70.85.127.91]

11    55 ms    55 ms    55 ms  gi1-0-2.car17.dllstx4.theplanet.com [67.18.116.8

5]

12    55 ms    52 ms    54 ms  85.67-18-179.reverse.theplanet.com [67.18.179.85

]

Trace complete.

======================

TCP/Web100 Network Diagnostic Tool v5.3.3d

click START to begin

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done

running 10s outbound test (client to server) . . . . . 188.00Kb/s

running 10s inbound test (server to client) . . . . . . 717.13kb/s

Your PC is connected to a Cable/DSL modem

Information: The receive buffer should be 451.40 Kbytes to maximize throughput

==================================

------  Web100 Detailed Analysis  ------

Cable modem/DSL/T1 link found.

Link set to Full Duplex mode

No network congestion discovered.

Good network cable(s) found

Normal duplex operation found.

Web100 reports the Round trip time = 1232.65 msec; the Packet size = 1460 Bytes; and

No packet loss was observed.

This connection is receiver limited 85.26% of the time.

  Increasing the the client's receive buffer (125.0 KB) will improve performance

This connection is network limited 14.71% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:

RFC 2018 Selective Acknowledgment: ON

RFC 896 Nagle Algorithm: ON

RFC 3168 Explicit Congestion Notification: OFF

RFC 1323 Time Stamping: OFF

RFC 1323 Window Scaling: ON

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Client IP addresses are preserved End-to-End

====================================

(SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10]

Checking for congestion

(cwndtime > .02) [0.14>.02], (mismatch = 0) [0=0]

(MaxSsthresh > 0) [0>0]

estimate = 9.04 based on packet size = 11Kbits, RTT = 1232.65msec, and loss = 1.0E-6

The theoretical network limit is 9.04 Mbps

The NDT server has a 8192.0 KByte buffer which limits the throughput to 51.92 Mbps

Your PC/Workstation has a 125.0 KByte buffer which limits the throughput to 0.79 Mbps

The network based flow control limits the throughput to 0.80 Mbps

Client Data reports link is 'T1', Client Acks report link is 'T1'

Server Data reports link is 'T1', Server Acks report link is 'T1'

Share this post


Link to post
Share on other sites

estimate = 9.04 based on packet size = 11Kbits, RTT = 1232.65msec, and loss = 1.0E-6

The theoretical network limit is 9.04 Mbps

The NDT server has a 8192.0 KByte buffer which limits the throughput to 51.92 Mbps

Your PC/Workstation has a 125.0 KByte buffer which limits the throughput to 0.79 Mbps

The network based flow control limits the throughput to 0.80 Mbps

Your RTT is still too high. This usually means something is limiting a clear signal flow. Can be a line quality problem or a faulty cable, or effects on your signalling devices (modem/router). If you are running a wireless, then it may be a problem with signal transmission to your router.

Please do some troubleshooting. When RTT goes down, PC throughput limit will go up and so does your download speed.

Here is a link that may help you to located possible line problem:

http://www.dslreports.com/faq/faq/8.%20Home%20wiring 

Share this post


Link to post
Share on other sites

Thanks for all the help but if it has come down to changing a wire or moving my stuff around for a clear signal flow......... I'm thinking it is not going to jump that high. A lot of trial and no change. Oh well, trogers you really went out of your way to help me and as I said, nothing has worked. Oh well, wonder if cable would be a better alternative for same $.

Thanks anyway but chalk this one to a lost cause.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...