maw1048 Posted September 9, 2006 CID Share Posted September 9, 2006 First of all, thanks in advance to any of you that can help me. I really appreciate whatever help I can get. Below is my current information. 1. Operating System Windows XP Professional with SP2 2. Internet Service Provider Comcast - 6000 / 786 3. Tweak Programs I've installed CableNut and TCPOptimizer SpeedGuide.net TCP/IP Analyzer TCP properties for IP = XX.XXX.XXX.XX () Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727) Notes: Read the Analyzer FAQ if the above is not your IP address. TCP options string = 020405b40103030401010402 MTU = 1500 MTU is fully optimized for broadband. MSS = 1460 Maximum useful data in each packet = 1460, which equals MSS. Default TCP Receive Window (RWIN) = 749568 RWIN Scaling (RFC1323) = 4 bits (scale factor of Unscaled TCP Receive Window = 46848 For optimum performance, consider changing RWIN to a multiple of MSS. Other RWIN values that might work well with your current MTU/MSS: 513920 (MSS x 44 * scale factor of 256960 (MSS x 44 * scale factor of 4) 128480 (MSS x 44 * scale factor of 2) 64240 (MSS x 44) bandwidth * delay product (Note this is not a speed test): Your TCP Window limits you to: 29982.72 kbps (3747.84 KBytes/s) @ 200ms Your TCP Window limits you to: 11993.088 kbps (1499.136 KBytes/s) @ 500ms MTU Discovery (RFC1191) = ON Time to live left = 49 hops TTL value is ok. Timestamps (RFC1323) = OFF Selective Acknowledgements (RFC2018) = ON IP type of service field (RFC1349) = 00100000 (32) Precedence (priority) = 001 (priority) Delay = 0 (normal delay) Throughput = 0 (normal throughput) Reliability = 0 (normal reliability) Cost = 0 (normal cost) Check bit = 0 (correct, 8th checking bit must be zero) DiffServ (RFC 2474) = CS1 001000 ( - class 1 (RFC 2474). Similar forwarding behavior to the ToS Precedence field. 4. Speed Test Results Download Stats Download Connection is:: 2943 Kbps about 2.94 Mbps (tested with 2992 kB) Download Speed is:: 359 kB/s Tested From:: https://testmy.net/ (Server 1) Test Time:: 2006/09/09 - 11:16am Bottom Line:: 51X faster than 56K 1MB Download in 2.85 sec Tested from a 2992 kB file and took 8.328 seconds to complete Download Diagnosis:: May need help : running at only 53.43 % of your hosts average (comcast.net) D-Validation Link:: https://testmy.net/stats/id-OJW27ZAK3 User Agent:: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727) [!] ------ Web100 Detailed Analysis ------ Cable modem/DSL/T1 link found. Link set to Full Duplex mode Information: throughput is limited by other network traffic. Good network cable(s) found Normal duplex operation found. Web100 reports the Round trip time = 54.16 msec; the Packet size = 1460 Bytes; and There were 8 packets retransmitted, 108 duplicate acks received, and 111 SACK blocks received The connection was idle 0 seconds (0%) of the time This connection is network limited 99.97% of the time. Web100 reports TCP negotiated the optional Performance Settings to: RFC 2018 Selective Acknowledgment: ON RFC 896 Nagle Algorithm: ON RFC 3168 Explicit Congestion Notification: OFF RFC 1323 Time Stamping: OFF RFC 1323 Window Scaling: ON Packet size is preserved End-to-End Server IP addresses are preserved End-to-End Information: Network Address Translation (NAT) box is modifying the Client's IP address Server says [XX.XXX.XXX.XX] but Client says [192.168.0.100] WEB100 Kernel Variables: Client: localhost/127.0.0.1 AckPktsIn: 1128 AckPktsOut: 0 BytesRetrans: 11680 CongAvoid: 1002 CongestionOverCount: 0 CongestionSignals: 6 CountRTT: 1013 CurCwnd: 23360 CurMSS: 1460 CurRTO: 260 CurRwinRcvd: 749568 CurRwinSent: 16304 CurSsthresh: 10220 DSACKDups: 0 DataBytesIn: 0 DataBytesOut: 4171220 DataPktsIn: 0 DataPktsOut: 2857 DupAcksIn: 108 ECNEnabled: 0 FastRetran: 6 MaxCwnd: 45260 MaxMSS: 1460 MaxRTO: 280 MaxRTT: 130 MaxRwinRcvd: 749568 MaxRwinSent: 16304 MaxSsthresh: 21900 MinMSS: 1460 MinRTO: 240 MinRTT: 40 MinRwinRcvd: 46848 MinRwinSent: 16304 NagleEnabled: 1 OtherReductions: 0 PktsIn: 1128 PktsOut: 2857 PktsRetrans: 8 X_Rcvbuf: 103424 RcvWinScale: 7 SACKEnabled: 3 SACKsRcvd: 111 SendStall: 0 SlowStart: 9 SampleRTT: 60 SmoothedRTT: 60 X_Sndbuf: 103424 SndWinScale: 4 SndLimTimeRwin: 0 SndLimTimeCwnd: 10063220 SndLimTimeSender: 2863 SndLimTransRwin: 0 SndLimTransCwnd: 1 SndLimTransSender: 1 SndLimBytesRwin: 0 SndLimBytesCwnd: 4171220 SndLimBytesSender: 0 SubsequentTimeouts: 0 SumRTT: 54860 Timeouts: 0 TimestampsEnabled: 0 WinScaleRcvd: 4 WinScaleSent: 7 DupAcksOut: 0 StartTimeUsec: 268758 Duration: 10068646 c2sData: 2 c2sAck: 2 s2cData: 9 s2cAck: 3 half_duplex: 0 link: 100 congestion: 1 bad_cable: 0 mismatch: 0 spd: 0.00 bw: 4.49 loss: 0.002100105 avgrtt: 54.16 waitsec: 0.00 timesec: 10.00 order: 0.0957 rwintime: 0.0000 sendtime: 0.0003 cwndtime: 0.9997 rwin: 5.7188 swin: 64.0000 cwin: 0.3453 rttsec: 0.054156 Sndbuf: 8388608 aspd: 9.34515 Checking for mismatch on uplink (speed > 50 [0>50], (xmitspeed < 5) [0.44<5] (rwintime > .9) [0>.9], (loss < .01) [0.00<.01] Checking for excessive errors condition (loss/sec > .15) [2.10>.15], (cwndtime > .6) [0.99>.6], (loss < .01) [0.00<.01], (MaxSsthresh > 0) [21900>0] Checking for 10 Mbps link (speed < 9.5) [0<9.5], (speed > 3.0) [0>3.0] (xmitspeed < 9.5) [0.44<9.5] (loss < .01) [0.00<.01], (mylink > 0) [3.0>0] Checking for Wireless link (sendtime = 0) [3.0E=0], (speed < 5) [0<5] (Estimate > 50 [4.49>50], (Rwintime > 90) [0>.90] (RwinTrans/CwndTrans = 1) [0/1=1], (mylink > 0) [3.0>0] Checking for DSL/Cable Modem link (speed < 2) [0<2], (SndLimTransSender = 0) [1=0] (SendTime = 0) [3.0E-4=0], (mylink > 0) [3.0>0] Checking for half-duplex condition (rwintime > .95) [0>.95], (RwinTrans/sec > 30) [0>30], (SenderTrans/sec > 30) [0.1>30], OR (mylink <= 10) [3.0<=10] Checking for congestion (cwndtime > .02) [0.99>.02], (mismatch = 0) [0=0] (MaxSsthresh > 0) [21900>0] estimate = 4.49 based on packet size = 11Kbits, RTT = 54.16msec, and loss = 0.002100105 The theoretical network limit is 4.49 Mbps The NDT server has a 8192.0 KByte buffer which limits the throughput to 1181.77 Mbps Your PC/Workstation has a 732.0 KByte buffer which limits the throughput to 105.59 Mbps The network based flow control limits the throughput to 6.37 Mbps Client Data reports link is 'T1', Client Acks report link is 'T1' Server Data reports link is '10 Gig', Server Acks report link is 'Ethernet' Tracert and Ping program Results The current date is: Sat 09/09/2006 The current time is: 12:11:57.15 Microsoft Windows XP [Version 5.1.2600] Pinging testmy.net [67.18.179.85] with 32 bytes of data: Reply from 67.18.179.85: bytes=32 time=34ms TTL=50 Reply from 67.18.179.85: bytes=32 time=54ms TTL=50 Reply from 67.18.179.85: bytes=32 time=34ms TTL=50 Reply from 67.18.179.85: bytes=32 time=34ms TTL=50 Reply from 67.18.179.85: bytes=32 time=33ms TTL=50 Reply from 67.18.179.85: bytes=32 time=40ms TTL=50 Reply from 67.18.179.85: bytes=32 time=40ms TTL=50 Reply from 67.18.179.85: bytes=32 time=42ms TTL=50 Reply from 67.18.179.85: bytes=32 time=1220ms TTL=50 Reply from 67.18.179.85: bytes=32 time=44ms TTL=50 Reply from 67.18.179.85: bytes=32 time=47ms TTL=50 Reply from 67.18.179.85: bytes=32 time=36ms TTL=50 Ping statistics for 67.18.179.85: Packets: Sent = 12, Received = 12, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 33ms, Maximum = 1220ms, Average = 138ms Ping Complete. Tracing route to testmy.net [67.18.179.85] over a maximum of 30 hops: 1 1 ms 1 ms 1 ms 192.168.0.1 2 * * * Request timed out. 3 * * * Request timed out. 4 * * * Request timed out. 5 * * * Request timed out. 6 * * * Request timed out. 7 * * * Request timed out. 8 * * * Request timed out. 9 * * * Request timed out. 10 * * * Request timed out. 11 * * * Request timed out. 12 * * * Request timed out. 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 33 ms 31 ms 31 ms 55.b3.1243.static.theplanet.com [67.18.179.85] Trace complete. 5. Uninstalled all the protocols there that were not needed. 6. IE.....Nothing there is checked. 7. NIC Card....Everything is up to date. 8. Done...Power cycle your modem, unplug it for at least 3 minutes 9. Done...Download, update, and do a scan with SpyBot and Ad Aware to remove any spyware 10. Do not use ZoneAlarm 11. Use Windows firewall 12. Done....I have AVG 13. All updates have been applied. 14. Done.....Download and run CCleaner 15. Currently using 6000 768, but don't know from what version of Van Buren. Which file should I be using? 16. I have not built my own file. I don't know that much about it. Quote Link to comment Share on other sites More sharing options...
FallowEarth Posted September 9, 2006 CID Share Posted September 9, 2006 Microsoft Windows XP [Version 5.1.2600] Pinging testmy.net [67.18.179.85] with 32 bytes of data: Reply from 67.18.179.85: bytes=32 time=34ms TTL=50 Reply from 67.18.179.85: bytes=32 time=54ms TTL=50 Reply from 67.18.179.85: bytes=32 time=34ms TTL=50 Reply from 67.18.179.85: bytes=32 time=34ms TTL=50 Reply from 67.18.179.85: bytes=32 time=33ms TTL=50 Reply from 67.18.179.85: bytes=32 time=40ms TTL=50 Reply from 67.18.179.85: bytes=32 time=40ms TTL=50 Reply from 67.18.179.85: bytes=32 time=42ms TTL=50 Reply from 67.18.179.85: bytes=32 time=1220ms TTL=50 Reply from 67.18.179.85: bytes=32 time=44ms TTL=50 Reply from 67.18.179.85: bytes=32 time=47ms TTL=50 Reply from 67.18.179.85: bytes=32 time=36ms TTL=50 Ping statistics for 67.18.179.85: Packets: Sent = 12, Received = 12, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 33ms, Maximum = 1220ms, Average = 138ms Ping Complete. Reply from 67.18.179.85: bytes=32 time=1220ms TTL=50 You see that this ping has significantly higher times than the others, showing that you've got some latency happening somewhere along the line. Tracing route to testmy.net [67.18.179.85] over a maximum of 30 hops: 1 1 ms 1 ms 1 ms 192.168.0.1 2 * * * Request timed out. 3 * * * Request timed out. 4 * * * Request timed out. 5 * * * Request timed out. 6 * * * Request timed out. 7 * * * Request timed out. 8 * * * Request timed out. 9 * * * Request timed out. 10 * * * Request timed out. 11 * * * Request timed out. 12 * * * Request timed out. 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 33 ms 31 ms 31 ms 55.b3.1243.static.theplanet.com [67.18.179.85] Trace complete. Your router is not allowing ICMP traffic. You should be able to enable this in the administration page of the router. You should be able to access this by typing 192.168.0.1 into the address bar of your browser. If not, I would suggest bypassing your router and running another ping, traceroute, and speedtest. It may be that your router is slowing you down. Quote Link to comment Share on other sites More sharing options...
maw1048 Posted September 10, 2006 Author CID Share Posted September 10, 2006 Looks like it was my router slowing me down. I connected to the cable modem directly and got great speed tests. :::.. Download Stats ..::: Download Connection is:: 6690 Kbps about 6.69 Mbps (tested with 12160 kB) Download Speed is:: 817 kB/s Tested From:: https://testmy.net/ (Server 1) Test Time:: 2006/09/10 - 7:17am Bottom Line:: 117X faster than 56K 1MB Download in 1.25 sec Tested from a 12160 kB file and took 14.89 seconds to complete Download Diagnosis:: Awesome! 20% + : 21.39 % faster than the average for host (comcast.net) D-Validation Link:: https://testmy.net/stats/id-SW7FUL1TY User Agent:: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727) [!] I couldn't figure out how to enable ICMP traffic. I looked trhough all the admin pages of the browser, but didn't see an option to enable ICMP traffic. Will there be an option that says, Enable ICMP traffic? Since it's my router slowing me down, is there any router tweaks / settings I can change so that it doesn't slow down my connection as much? Quote Link to comment Share on other sites More sharing options...
xgsx Posted September 29, 2006 CID Share Posted September 29, 2006 What make/model router do you have? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.