JH2688 Posted August 20, 2007 CID Share Posted August 20, 2007 Now that i have bought a DVI cable i can connect my PC to my TV. Heres the problem i cannot get the right screen resolution with it. Down below is a pic of what i mean. I have a 53inch projection tv with a DVI input. My PC has a HDMI ouput that came with a HDMI to DVI adaptor. I have tried all the settings on the ATI catalyst control center(if you know what i mean). This is the best ive got it but it still cuts a lot of. I dont know if this matters but i bought a 18 pin DVI cable, There was a 24 pin cable, but that was more expensive. What are your thought abouts this? Quote Link to comment Share on other sites More sharing options...
Buntz Posted August 20, 2007 CID Share Posted August 20, 2007 Do you have a VGA jack or DVI jack on the TV, that the owner manual said to hook the PC up too? My 40" Samsung LCD will only get the right resolution[1366X768] when i use the PC jack. In the owner manual it say the HDMI jacks do not support PC connection. Quote Link to comment Share on other sites More sharing options...
dlewis23 Posted August 21, 2007 CID Share Posted August 21, 2007 all you need to do is adjust the settings on your tv, its just over scaling the image. If you have a "good" TV there will be a setting for it so you can push the sides and top and bottom in. If not there should be a setting in your ATI settings for that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.