Subnet addressing

[Swimmer]

I was wondering if anyone here had any experience in subnet addressing.. I have an idea how how to connect mutiple routers together but would like to subnet them

[just-]

i know subnetting and i can give you some help

let me know how many pc how many routers

and i will make u a lan diagram

i do that for a living, or well trying to atm

you should be able to subnet and assign diff ip to diff routers, i dont know what sort of router u using and what level of config you can do, but if u want ot subnet you need to be able to change the netmask id as well as the ip adress.

[KingCobra]

http://www.cisco.com/warp/public/701/3.html

[Swimmer]

Ok.. 3 routers.. the default subnet is 255.255.255.0.  So i change it to 255.255.255.192 to get 4 subnets.  Now how do i configure the routers to use each subnet?

[just-]

ok so u know a bit of subnetting good

what routers or modems have u got?

u need to give the MASK as 255.255.255.192

and set an ip on each one on the different sub net

[Swimmer]

right i set that on the DI-524 with the subnet as 255.255.255.192. so i assigned the dhcp to issue between .2-.63  I guess .63 is the tansfir ip.  Now i just need to know how to configure the other 2 routers.  a Netgear WGR101 and a Dlink 614+

[KingCobra]

What problem are you trying to solve?

[just-]

i sugest this

subnet mask 255.255.255.192

Network Hosts 192.168.1.0 from 192.168.1.1 to 192.168.1.62           Broadcast Address192.168.1.63

Network Hosts 192.168.1.64 from 192.168.1.65 to 192.168.1.126 Broadcast Address192.168.1.127

Network Hosts 192.168.1.128 from 192.168.1.129 to 192.168.1.190 Broadcast Address192.168.1.191

Network Hosts 192.168.1.192 from  192.168.1.193 to 192.168.1.254 Broadcast Address192.168.1.255

[Swimmer]

right now how to i get the routers on each of those ip address.??

[just-]

well you just assign them i dont know about that